ARMY A-A-52450 B-2009 VERMICULITE ABSORBENT (FOR PACKAGING LIQUID HAZARDOUS MATERIALS)《(用于包装液体有毒危险品的)蛭石吸收剂》.pdf

1、 A-A-52450B June 12, 2009 SUPERSEDING A-A-52450A February 13, 2003 COMMERCIAL ITEM DESCRIPTION VERMICULITE, ABSORBENT (FOR PACKAGING LIQUID HAZARDOUS MATERIALS) The General Services Administration has authorized the use of this commercial item description for all federal agencies. 1. SCOPE. This Com

2、mercial Item Description (CID) covers expanded or exfoliated vermiculite to be used for the absorbent packaging of liquid hazardous materials (HAZMAT). 2. CLASSIFICATION. The vermiculite shall conform to the density and grading of ASTM C 516, Standard Specification for Insulation, Thermal, Loose Fil

3、l, Vermiculite. 2.1 Type. Type I - Vermiculite loose fill insulation 2.2 Grade. Grade 3 - Fine 3. SALIENT CHARACTERISTICS 3.1 Characteristics. The vermiculite shall be dry, nonwetted, untreated, nonabrasive, and free from any additives or surfactants. FSC 8135 NOT MEASUREMENT SENSITIVE Beneficial co

4、mments, recommendations, additions, deletions, clarifications, etc. and any data that may improve this document should be sent to: Chief, LOGSA Packaging, Storage, and Containerization Center, ATTN: AMXLS-AT, 11 Hap Arnold Boulevard, Tobyhanna, PA 18466-5097 or e-mailed to toby.ptus.army.mil. Provid

5、ed by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-52450B 3.2 Workmanship. Expanded or exfoliated vermiculite shall be clean and free from extraneous particles per the Environmental Protection Agency (EPA) and Occupational Safety and Health Administration

6、 (OSHA) regulations. 3.3 Metric products. Although the metric system of measurement is the preferred system of weights and measure in CIDs, products manufactured to inch/pound units will be considered on an equal basis with those manufactured using metric dimensions, provided they fall within specif

7、ied tolerances using conversion tables contained in the latest revision of FED-STD-376, Preferred Metric Units for General Use by the Federal Government, and all other requirements of this CID are met. 4. REGULATORY REQUIREMENTS 4.1 Material Safety Data Sheet (MSDS). A MSDS shall be provided per Tit

8、le 29 of the Code of Federal Regulations, section 1910.1200 (Hazard Communication). 4.2 Recovered material. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 5. PRODUCT C

9、ONFORMANCE PROVISIONS 5.1 Product conformance. The products provided shall meet the salient characteristics of this Commercial Item Description, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commerci

10、al marketplace. The Government reserves the right to require proof of such conformance. 5.2 Inspection requirements. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch/pound units, a request should be made to the contracting officer to

11、determine if the product is acceptable. 5.2.1 The contracting officer has the option of accepting or rejecting the product. 6. PACKAGING. The packaging and packing shall be in accordance with retail or consumer packaging, per ASTM D 3951, Standard Practice for Commercial Packaging, shall assure acce

12、ptance by common carrier, and shall provide product protection against loss and damage during multiple shipments, handling, and storage. The shipping container shall be in compliance with the National Motor Freight Classification or Uniform Freight Classification. Marking shall be as specified in th

13、e contract or order and shall include the applicable precautionary warning statements concerning nuisance dust hazards and the use of personal protection equipment. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-52450B 7. NOTES 7.1 Source of d

14、ocuments. ASTM standards are available at www.astm.org or from ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. 7.1.1 FED-STD-376 is available at http:/assist.daps.dla.mil or http:/assist.daps.dla.mil/quicksearch or from the Document Automation and Production Service, Bui

15、lding 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. 7.1.2 Federal Acquisition Regulation (FAR) and the Code of Federal Regulations are available at www.acqnet.gov/far or from the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402-0001. 7.2 National Stock Numb

16、er (NSN). Use NSN 8135-01-324-2664 when ordering absorbent vermiculite for packaging liquid HAZMAT. 7.3 Key words. Exfoliated, expanded, insulation. MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: Custodians: GSA-FAS Army - SM Navy - MC Preparing Activity: Air Force - 69 Army - SM (Project 8

17、135-2009-004) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-