ARMY A-A-52507-1994 CHAIN ASSEMBLY AND CROSS CHAIN TIRE FOR MILITARY VEHICLES [Superseded ARMY MIL-C-3143 A CANC NOTICE 2 ARMY MIL-C-3143 A CANC NOTICE 1 ARMY MIL-C-3143 A (2) ARMY.pdf

1、INCH-POUND A-A-52507 November 3, 1994 SUPERSEDING (see 5.4) COMMERCIAL ITEM DESCRIPTION CHAIN ASSEMBLY AND CROSS CHAIN, TIRE: FOR MILITARY VEHICLES The General Services Administration has authorized the use of this commercial item description (CID) for all federal agencies. 1. SCOPE This CID covers

2、tire chain assemblies and replacement cross chains with cross chain hooks for use on military tactical wheeled vehicles equipped with military single pneumatic tires. Tire chain assemblies are referred to herein as “chain assemblies“. 1.1 Description. Each chain assembly is comprised of two side cha

3、ins and the required number of cross chains for each tire. Cross chain hooks are used to connect the cross chains to the side chains. Side chain fasteners are used to connect the ends of each side chain. Replacement cross chains are used to repair chain assemblies. 2. SALIENT CHARACTERISTICS 2.1 Mat

4、erials. All tire chain components shall be made of carbon steel, Unified Numbering System (UNS) grade G10060 through 610200, except for the cross chain hooks. The cross chain hooks shall be carbon steel, UNS grade G10120 through G10220, and shall be stress relieved after cold forming. The use of rec

5、overed materials made in compliance with regulatory requirements is acceptable providing that all requirements of this CID are met (see 5.5). Beneficial comments, recommendations, additions, deletions clarifications, etc. and any other data which may improve this document should be sent by letter to

6、: U.S. Army Tank-automotive and Armaments Command, ATTN: AMSTA-TR-T, Warren, MI 48397-5000. I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-52507 m 9999974 0365854 350 A-A-52507 2.2 Heat treatment. Cross chains shall be case hardened by carburi

7、zing or carbonitriding to a case depth as specified in NACM-5179(TC) and shall have 2 Rockwell hardness C53 minimum or equivalent. 2.3 Design and construction. Unless otherwise specified herein, chain assembly components shall conform to the requirements specified in NACM-5179(TC), such as wire size

8、s, dimensions, and tolerances. 2.3.1 Chain assemblies. Chain assemblies shall be comprised of side chains, cross chains, side chain fasteners, and cross chain hooks as illustrated in figure 1. Chain assemblies shall be constructed and selected for the tire sizes listed in table I. For the tire sizes

9、 listed in table II, chain assemblies shall conform to the requirements as specified in table 11. 2.3.1.1 Cross chains. Cross chains shall be constructed of regular, twist link chain. 2.3.1.2 Side chain fasteners. Side chain fasteners shall provide a secure attachment to one side chain end, and shal

10、l provide a quick, secure lock to the other side chain end. The lock shall be readily opened and closed. Side chain fasteners shall not be open-type keeper links. SIDE CH SIDE CHAIN FASTENER CROSS CHAIN _J FIGURE 1. Chain Assembly. 2 Provided by IHSNot for ResaleNo reproduction or networking permitt

11、ed without license from IHS-,-,-A-A-52507 m 9999974 OLb5855 297 m A-A-52507 TABLE I. Chain assembly and replacement cross chain sizes conforming to NACM-5179(TC). Tire Size 6.00-13 6.50-13 7.00-14 6.00-15 6.50-15 7.50-15 9.00-15 6.00-16 6.50-16 7.00-16 7.50-16 8.25-16 9.00-16 7.50-17 7.00-20 7.50-20

12、 8.25-20 9.00-20 10.00-20 11.00-20 12.00-20 14.00-20 16.00-20 16.00-20 10.00-22 11.00-24 12.00-24 13.00-24 14.00-24 16.00-24 16.00-25 NOTE : Chain Assembly PIN A52507- 1/ - 1207 1217 2209 12 10 1240 2219 2211 2203 2206 2219 2221 2228 2237 2214 2233 2237 2239 2241 2245 2251 2255 2271 2627 2624 2249 2

13、253 2257 2612 2615 2627 2627 Former MS500055 Dash No. -33 -36 -38 -34 -37 -5 -12 -1 -2 -53 -6 -10 -13 -7 -4 -8 -11 -14 -16 -2 2 -24 -2 7 -29 -80 -17 -23 -2 5 -2 6 -28 -31 -32 Replacement Cross Chain PIN A52507- - 1/ 5214 5214 6219 5214 5220 6221 6219 6218 62 18 6221 6221 6225 62 51 622 1 6251 6251 6

14、251 6251 6251 6260 6253 6266 6640 6640 6253 62 60 6263 7422 7422 6640 6640 Former MS500057 Dash No. -12 -12 -12 -12 -12 -2 -6 -1 -1 -2 -2 -3 -6 -2 -4 -4 -5 -6 -6 -7 -7 -8 -10 -9 -6 -7 -7 -8 -8 -10 -10 - 1/ The PIN numbers listed are the chain assembly and replacement cross chain code numbers specifi

15、ed in NACM-5179(TC). 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-52507 m 9999974 0365856 L23 m A-A-52507 m $ -4 m C -4 m c u m II) O U L4 c, C 2 Q) u (d r( a Q) LI a C m r( h Q m II) m C -4 m c u H H W il a: h m h. I r- zm b HN MS500055E(AT

16、), dated 28 March 1986; MS500056E(AT), dated 28 March 1986; MS500057D(AT), dated 28 March 1986; MS500058D(AT), dated 16 September 1986; MS500059G(AT), dated 10 November 1986; and MS500060G(AT), dated 16 September 1986 which have been superseded by this CID. 5.5 Regulatory requirements. The offeror/c

17、ontractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable. MILITARY INTERESTS: Custodians: Army - AT Air Force - 99 Review Activity: Air Force - 84 DLA - CS CIVIL AGENCY COORDINATING ACTIVITY: GSA - FSS PREPARING ACTIVITY: Army - AT (Project 2540-0382) 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-