ARMY A-A-52544-1995 FIFTH WHEEL ASSEMBLY -33 INCH UNIVERSAL TRUCK-TRACTOR 25000 LBS CAPACITY《25000 LBS 容量卡车拖拉机33英寸的普及的第五轮装配》.pdf

1、A-A-5254Y 977977Y 03b7930 Yb7 = * A-A-52544 - SUPERSEDING MS52105 16 July 1969 COMMERCIAL ITEM DESCRIPTION FIFTH “EEL ASSEMBLY-33 INCH UNIVERSAL, TRUCK-TRACTOR, 25000 LBS. CAPACITY The General Services Administration has authorized the use of this Comercial Item Description (CID) for all federal age

2、ncies. 1. SCOPE. This CID covers requirements for a fifth wheel assembly used in coupling a truck-tractor to a trailer. 2. SALIENT CHARACTERISTICS 2.1 Material. The materials shall be in accordance with the manufacturers material specifications for fifth wheels. The use of recovered material made in

3、 compliance with regulatory requirements is acceptable providing that all requirements of this CID are met (see 5.4). 2.2 * accordance with figure 1. . The fifth wheel assembly shall be designed and constructed in Beneficial comments, recommendations, additions, deletions clarifications, etc. and an

4、y other data which may improve this document should be sent by letter to: U.S. Army Tank-automotive and Armaments Command, ATTN: AMSTA-TR-EBLUE, Warren, MI 48397-5000. FSC 2510 NT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking pe

5、rmitted without license from IHS-,-,-A-A-52544 FRE 26O AET 14O -. e- 7 NOTES: 1. Fifth wheel assembly requires use of 2 inch kingpin as shown in A-A-52478. 2. Dimensions are in inches. Unless otherwise specified, tolerances are f .06. 3. This CID is not intended to limit construction to features oth

6、er than specified herein, by dimensions, notations, or referenced documenis. 4. The use of asterisks (*) indicates that dimensions are covered by international agreement (see 5.5). 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-525 Y4 9999974

7、 OLb932 23T i A-A-52544 . . Identification and markings of the fifth wheel assemblies shall . 2.3 be permanent and legible and shall include, as a minimum, the manufacturer?s identification code (CAGE), the manufacturer?s part number, and the part identification number PIN) AA52544-1 (see 5.2). 3. Q

8、UALITY ASSURANCE PROVISIONS . . The contractor is responsible for the performance of all . 3.1 inspections (examinations and tests). 3.2 ? ? ? . The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this commercial item descri

9、ption and that the product conforms to the producer?s own drawings, specifications, workmanship standards, and quality assurance practices. Items with known defects shall not be submitted for Government acceptance. The Government reserves the right to require proof of such conformance prior to the f

10、irst delivery and thereafter as may be otherwise provided for under the provisions of the contract. 4. PRESERVATTON, PACKAGING.PACKING, LABETJNG, -. Preservation, packaging, packing, labeling, and marking for the desired level shall be as specified in the contract (see 5.2). 5. NOTES (This section c

11、ontains information of a general or explanatory nature that may be helpful, but is not mandatory.) 5.1.1 Government. Copies of A-A-52478 ?Kingpin, Fifth Wheel, 3 112 Inch? are available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 191 11 -5094. 5.2

12、khkta . Acquisition documents must specify the following: a. Title, number, and date of this CID. b. Issue of the DODISS to be cited in the solicitation. c. PIN number and quantity of fifth wheel assemblies required. d. Selection of applicable level and packaging requirements. 3 Provided by IHSNot f

13、or ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-52544 9999974 0369933 176 A-A-52544 5.3 substitutable with fifth wheel assemblies conforming to MS52105. . Fifth wheel assemblies conforming to this CID are interchangeable1 5.4 accordance with Public Law 94-580 to th

14、e maximum extent practicable. . The offeror/contractor is encouraged to use recovered materials in 5.5 a . Certain provisions of this CID (see figure 1) are the subject of international standardization agreement QSTAG 284 and NATO-STANAG 4009. When amendment, revision, or cancellation of this CID is

15、 proposed that will modify the international agreement concerned, the preparing activity will take appropriate action through international channels, including departmental standardization off ices, to change the agreement or make other appropriate accommodations. MILITARY INTERESTS: Custodians: Army - AT Navy - MC Air Force - 99 CIVIL AGENCY COORDINATING ACTIVITY: GSA - FSS PREPARING ACTMTY: Army - AT (Project 2510-0137) Review activities: Air Force - 84 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-