ARMY A-A-59126 11 B-2012 TERMINALS STUD (NONINSULATED) STYLE SE11.pdf

1、 Comments, suggestions, or questions on this document should be emailed to usarmy.APG.cerdec.mbx.standardization-crxmail.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https:/assist.daps.dla.mil/ AMSC N/A

2、 FSC 5940 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. INCH-POUND A-A-59126 /11B 28 March 2012 PROPOSED SUPERSEDING A-A-59126 /11A 31 May 2011 COMMERCIAL ITEM DESCRIPTION SHEET TERMINALS, STUD (NONINSULATED) STYLE SE11 The General Services Administration has auth

3、orized the use of this commercial item description (CID) as a replacement for Style SE11 of MIL-T-55155/11 for all federal agencies. The requirements for acquiring the product described herein shall consist of this sheet and CID A-A-59126. REQUIREMENTS: Dimensions and configuration: see Figure 1. Fi

4、gure 1. Configuration and Dimensions Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59126/11B 2 PART NUMBER DIMENSIONS MOUNTING BOARD THICKNESS (REF) A B C D E F G H .005 J +

5、.007 -.003 AA59126/11X- -01 .104 .072 .002 .050 .093 .038 .020 .082 .082 .017 .062 AA59126/11X- -02 .113 .094 AA59126/11X- -03 .145 .125 AA59126/11X- -04 .094 .063 +.000 -.005 .062 .094 .045 .024 .069 .053 .020 .031 AA59126/11X- -05 .084 .062 AA59126/11X- -06 .115 .094 AA59126/11X- -07 .147 .125 AA5

6、9126/11X- -08 .094 .042 +.000 -.005 .045 .062 .028 .024 .069 .037 .012 .016 AA59126/11X- -09 .053 .031 AA59126/11X- -10 .084 .062 Figure 1. Configuration and Dimensions (continued) Figure 1 Notes: 1. Dimensions are in inches. 2. Unless otherwise specified, tolerances are 0.015 inch for types -01 thr

7、ough -03, and 0.010 inch for types -04 through -10 on decimals and 3 on angles for all types. 3. Drawing depicts only general design characteristics and is not intended to limit specific manufacturing processes. Type of mounting: swage. Table I. Substitutability data. Part number in A-A-59126/11 1/

8、Part number in MIL-T-55155/11F 1/ AA59126/11X - - 01 M55155/11X - - 01 AA59126/11X - - 02 M55155/11X - - 02 AA59126/11X - - 03 M55155/11X - - 03 AA59126/11X - - 04 M55155/11X - - 04 AA59126/11X - - 05 M55155/11X - - 05 AA59126/11X - - 06 M55155/11X - - 06 AA59126/11X - - 07 M55155/11X - - 07 AA59126

9、/11X - - 08 M55155/11X - - 08 AA59126/11X - - 09 M55155/11X - - 09 AA59126/11X - -10 M55155/11X - -10 1/ The complete part number shall include the symbol for the conductor material and finish. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo rep

10、roduction or networking permitted without license from IHS-,-,-A-A-59126/11B 3 MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY Custodian: GSA-7FXE Army - CR Navy EC Preparing activity: Air Force 85 Army CR Reviewer: (Project No. 5940-2012-003) DLA - GS NOTE: The activities listed above were i

11、nterested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil/ . Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-