ARMY KK-L-165 C-1969 LEATHER CATTLEHIDE VEGETABLE TANNED AND CHROME RETANNED IMPREGNATED AND SOLES《植物鞣和铬重鞣牛皮浸渍鞋底》.pdf

1、_ - - KK-L-LbSC 3 9979774 0050526 7 KK-L-165C May 1, -1969 SUPERSEDING Fed. Spec. KK-L-165b June 10, 1964 FEDERAL SPECIFICATION LEATHEn, CATTLMIDE, VEGETABLE TANNED AND CHROME REZANNED, IMPFEGNATED: AND SOLES This specification was approved by the Commissioner, Federal . ,Supply Service, General Ser

2、vices Administration, for the use of all Federal agencies. . 1. SCOPE AND CLASSIFICATION 1.1 Scope, This specification covers requirements for fui1 grain, impregnated and nonimpregnated, vegetable tanned and chrome retanned, cattlehide sole leather and cut stock. 1.2 Classification. 1.2.1 bes. class

3、es. subclasses and styles. The leather and cut stock shall be furnished in the following types, classes, subclasses, and styles as specified (see 6.2). Tgpe I Type II Type III Type IV - Factory (for shoemaking). - Finders (for shoe repair). - Vegetable-tanned, impregnated (for shoemaking and shoe re

4、pairing). - Chrome-retanned, impregnated (for shoemaking and shoe repairing). Class 1 - Backs. Class 2 - Bends, Class 3 - Soles. Style 1 - Mens Style 2 - Womens Subclass (a) Subclass (b) Subclass (c) class 4 - Top lifts. Style 1 - Mens Style 2 - Womens Style 1 - Mens Style 2 - Womens Class 5 - Shoul

5、ders. Class 6 - Strips. Class 7 - Bellies. - Full soles (outer). - Full soles (middle). - Corrugated and Solid, Sheet Stock (Container Grade), and Gut Shapes. Federal Standards: Fed. SM. No. 123 - Marking for Domestic Shipment (Civilian Fed. Pest Method IM. No. 311 - Leather, Methods of Sampling Age

6、ncies). and Testing. (Activities outside the Federal Government may obtain copies of Federal specifications, standards, and handbooks as outlined under General Information in the index of Federal Specifications and Standards and at the prices indicated in the Index. The Index, which includes cumulat

7、ive monthly supplements as issued, is for sale on a subscription basis by the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 120402). activities outside the Federal Government for bidding purposes are available without charge from the Business Service Centers at the G

8、eneral Services Administration Regional Offices in Boston, New York, Washington, D.C., Atlanta, Chicago, Kansas City, Mo., Fort Worth, Denver, San Francisco, Los Angeles, and Seattle, Wash.) (Federal Government activities may obtain copies of Federal specifications, standards, and handbooks and the

9、index of Federal Specifications and Standasda from established distri- bution points in their agencies. (Single copies of this specification and other Federal specifications required by pitam Specification: MIL-L-43432 - Leather, Packaging and Packing of. J4iiitam Standards: ML-STD-105 - Sampling Pr

10、ocedures and Tables for Inspection by MIL-STD-129 - Marking for Shipment and Storage. Attributes. (Copies of Military Specifications and Standards required by contractors in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contractin

11、g officer.) 3. REQUIRPLENTS 3.1 Material. 3.1.1 Tannave. Types I, I1,and III shall be vegetable tanned. Type IV shall be tanned 3.1.2 Impremation (mes III and IV). with chrome and vegetable tanning materials. elastomers and resins (see 6.3). Types III and IV shall be impregnated with I a 4 t Provide

12、d by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-KK-L-165C 3.2 Physical requirements. 3.2.1 3.2.1.1 Class 1 (backs). class 2 (bends). class 5 (shoulders).and class 7 (belliesr. The leather shall be furnished in the form of backs, bends, shoulders or bellies

13、as required for the class specified (see 6.2) and shall conform to the applicable definition as listed under ”Definition of terms” in Fed. SM. 3U. half soles), class 4 (top lifts), and class 4a (under lifts). furnished in the form of outer soles, middle soles, half soles, top lifts or under lifts as

14、 required for the style, class and subclass specified (see 6.2). purchased directly by the Government, the size shall be as specified (see 6.2) and the peri- phery of the cut part shall be not less than the periphery of the applicable Government pattern, but may be larger. L2.1.2 Class 3 incorrect;

15、illegible; of improper size, location, sequence, or method of application. 4.2.3.2 kamination for dimensional characteristics, Worlnnanship kamine Defects Periphery 1/ Less than periphery of (classes 3, 4 and 4a) applicable Government pattern. Inadequate application of components, such as incomplete

16、 closure of container flaps, improper taping, loose strapping, inadequate stapling. Bulged or distorted container. Width 2/ (class 6) Width less than 12-7/8 inches or more than 13-1/8 inches. I Not as specified. I Thickness 2/ r/ When required (see 3.2.1.2). 2/ The width shall be determined at three

17、 points equally spaced along the length of the strip. 2/ Thickness shall be determined in accordance with method 1011 of Fed. Std. 311 using a standard wedge type gage, For classes 4 and after the required time for immersion, the shrinkage temperature shall be determined. 81ll of Fed. SM. 311 except

18、 that the procedure and calculation of results shall be as follows: The specimen shall be The extracted specimen shall be air dried until the odor of The air dried specimen shall then be completely immersed in 4.4*4 Water absorption. Water absorption shall be determined in accordance with method A h

19、ole 1/8 inch in diameter shall be punched in one end of the specimen. of the hole shall be located approximately 114 inch from the end and at the approximite center of the width dimension. Each specimen shall be weighed and the weight recorded as W clip shall be inserted in the hole, and the specime

20、n and attached clip shall be weigk2.d together. This weight shall be recorded as W2. plastic coated wire having a diameter of 0.125 inch shall be used to prevent the specimens from touching the bottom.of the glass tray in which they are to be imnersed. A l/L$ inch end section of each length of wire

21、shall be bent at approiamately a 90 degree angle to prevent the wire from rolling. Each length of wire shall be placed on the bottom of a 18 by 12 inch rectangular glass tray (Fisher catalog No. 15-241C or equal) with the length of the wire parallel to the width of the tray. distilled water (to the

22、nearest 5 cubic centimeters), at 23 i l0C, equivalent to 10 times the total weight of the specimens shall be added to the glass tray. shall be completely immersed in the water by being placed on the wire, grain side up, in such a manner that the specimens do not touch the bottom or sides of the glas

23、s tray. be 4 rows of specimens with not more than L$ specimens in each row. The distance between adjacent spacimens shall be not less than 1/2 inch, period shall be submerged by placing a glass rod on the specimen. completely immersed, the tray shall be covered. 24 2 l/4 hours, the tray shall be unc

24、overed and the specimens removed from the the metal clip with tongs or other suitable device. for 2 minutes. edges which show water droplets. The center A metal Eight 9-1/4 inch lengths of i4. gauge water resistant The distance bebeen adjacent wires shall be approximately 2 inches. A volume of The s

25、pecimens with metal clips attached There shall Any specimen that tends to float after a i5 minute When all the specimens are After the specimens have been immersed for water by gripping The specimens shall be hung up and air dried After the required bssLWhen specified (see 6.2), the shipping contain

26、er shall be a grade V3c or V3s fiberboard box fabricated in accordance with PPP-B-636 and closed in accordance with the appendix of the container specification. Each container shall Each shipping container shall be The shipping container material may also be grade V4s of PPP-F-320. 5.2.2.3 Level C.

27、Soles and lifts, packaged as specified in 5.1.2, shall be packed in a manner to insure carrier acceptance and safe delivery at destination at the lowest transportation rate for such supplies. applicable to the mode of transportation. Containers shall be in accordance with rules or regulations of car

28、riers 5.3 Markinn. 5.3.1 Civil agencies. In addition to any special marking required by the contract or order, interior packages and shipping containers shall be marked in accordance with Fed. SM. No. 123. 5.3.2 Military apencies. In addition to any special marking required by the contract or order,

29、 interior packages and shipping containers shall be marked in accordance with Fed. Std. NO. 123. 5.3.3 Military agencies. In addition to any special marking required by the contract or order, interior packages and shipping containers shall be marked in accordance with MIL-STD-129 6. NOTES 6.1 and sh

30、oes. Infended use. The leather and cut parts are intended for use as components in boots 12 I 4 a Q 4 t Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-f ! I l KK-L-16% 6.2 Ordering data. Purchasers should select the preferred options permitted herei

31、n and inolude the following information in procurement documents: (a) (b) (c) (d) Thickness required (see 3.2.2). (e) (f) (g ) Title, number, and date of this specification. Type, dass, subclass, and style required (see 1.2). Size, when classes 3, 4 and & are purchased directly by the Government Whe

32、n paranitrophenol is not required (see 3.3.1). Selections of applicable levels of packaging and packing (see 5.1 and 5.2). When weather-resistant grade fiberboard shipping containers are required 6.3 impremating materials. impregnation with a blend of the following elastomers and (see 3.2.1.2). for

33、level B packing (see 5.2.2.2.1). resins is known to improve the resistance of leather to abrasion and water absorption: Elastomers: Polymeric substances such as polyisobutylene, polybutene, or copoymers such as butyl rubber (GR-1) which are insoluble in acetone and alcohols, but are soluble in hydro

34、carbon solvents and.chlorinated solvents. Resins: Polymerized or extracted resins that are almost completely saponifiable and are soluble in a great variety of organic solvents including hydrocarbons, chlorinated compounds, acetone and alcohol. 6.4 Supersession data, The correlation between the clas

35、ses of the superseded KK-L-165b and the changed classes specified herein is as follows: KK-L-165C KK-L-165b Glasses Classes - Class 5 - Shoulders Class 7 - Bellies bIIZITAFtY CUSTODIANS: Army - GL Navy - SA Air Force - 11 Review activities: AT?-m Navy - SA Air Force - 82, 85 User activity: Navy - M

36、Class 5 official Subclass d - Shoulders Subclass e - Bellies Preparing activity: 1Lrw - GL CIVIL AGENCIES INTEREST: L AGR Cohl-NBS DG . GSA-FSS HEW Jus-FPI VA-DbE Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-u KK-L-165C 83 W 7979774 0050539 5 W m-

37、L-165 H i: Y U g e .- .- i? E 1 a Y m .- a s I e E 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-POOR FIBER-This wrinkle pattern is typical of a neck sole. Figure 1a.-Fiber quality. (See also figure 1.) 15 Provided by IHSNot for ResaleNo reproduc

38、tion or networking permitted without license from IHS-,-,-3.6 KK-L-Lb5C 83 7777774 0050541 3 Typical visual characteristics of a soff spot on the grain side. Typical visual characteristics of a soh spot on the flesh side. Figure %-Soft spots. I Provided by IHSNot for ResaleNo reproduction or network

39、ing permitted without license from IHS-,-,-Y . . . . . . . . 17 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-KK-L-16 5C 18 WELL-HEALED SCRATCHES. OPEN SCRATCHES Figure 4. - Scratches, Provided by IHSNot for ResaleNo reproduction or networking perm

40、itted without license from IHS-,-,-I- s t iL b 19 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-KK-L-Lb5C 83 777777Ll 0050545 O W m-Ll65C 20 Q Q 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3 Z

41、 a 5 J (3 Q P a C .- E 21 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ROUGH GRAIN. EXTENSIVE BROKEN OR CRACKED GRAIN. DEEP GRAIN CUTS. Figure la.-Grain damage. (See also figure 7.) -. 22 _I Provided by IHSNot for ResaleNo reproduction or networki

42、ng permitted without license from IHS-,-,-. WELL-HEALED GRUB DAMAGE. OPEN GRUB HOLE. Figure &-Grub damage, grain side. (See also figure 8a.) 23 _ . . . . . . . _ Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-.- WELL-HEALED GRUB DAMAGE. -. OPEN GRUB

43、 HOLE. Figure Ea.-Grub damage, flesh side. (See also figure 8.) 24 KK-El65C Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-.-i KK-L-LbSC 3 = 7777774 0050550 4 W . . _. . . . . I . . . . . - . - -II -I- d b cb 25 Provided by IHSNot for ResaleNo repro

44、duction or networking permitted without license from IHS-,-,-KK-E165C 26 SLIGHT SLAUGHTER CUTS. SHALLOW SLAUGHTER CUTS. DEEP SLAUGHTER CUTS. Figure 10.-Slaughter cuts. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-LEATHER HAS BEEN REMDVED FROM THE

45、FLESH SIDE OF THIS OTER SOLE TO PROVIDE WIFORM THICKNESS. THE .RESIDUAL VEIN MRKIN(X PROVIDE EVIDENCE THAT THE THICKNESS OF LEATHER REM3VED WAS NOT EXESSIVE AND THAT NO GREAT INJURY TO THE LEATHER HAS OCCURRED. -. Figure 11. - Leveling, flesh side. (See also figure lia.) 27 Provided by IHSNot for Re

46、saleNo reproduction or networking permitted without license from IHS-,-,-R KK-L-LbSC 83 7797974 0050553 T f i a f ABSENCE OF VEIN MARKINGS INDICATE THAT AN EXCESSIVELY THICK LAYER OF APPEARANCE FACTOR .IS TYPICAL OF BLED SOLES. ISATHER HAS BEEN REMOVED FROM THE FLESH SIDE OF THIS OUTER SOLE. THIS Fi

47、gure lia. - Leveling, flesh siae. (See also figure 11.) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- KK-L-Ib5C 83 7779774 0050554 .I m I . SLGHTLY FLESHY. Figure 19.-Fleshiness. (See also figure 1Pa.) KK-L-165C 29 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-KK-L-IbSC 83 7777774 0050555 3 I EXCESSIVELY FLESHY. Figure 12a.-FIeshinesr. (See also fisure 1%) . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-