ARMY MIL-B-1406 C-1975 BOTTLE SCREW CAP IDENTIFICATION BURIAL《螺旋盖瓶埋藏识别》.pdf

1、MIL-I)- 140 6 B 29 July 1969 (- MILITARY SPECIFICATION BOTTLE, SCREW CAP, IDENTIFICATION, BURIAL This specification is approved for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 This specification covers one type and size of Bottle, Screw Cap, Identification, Burial

2、containing an instruction sheet. 2. APPLICABLE DOCUIENTS * 2.1 lhe following documents, of the issue in effect on date of invitation -for bids or request for proposal, form a part of this specification to the extent specified herein: SPECIFICAT IONS FEDERAI, PPP-8-636 - boxes , Shipping, Fiberboard.

3、 PPP-T-45 - Tape, Gummed, Paper, Reinforced and Plain, for Sealing and Securing. STAXDARDS NILITARY MIL-STD-105 - Sampling Procedures and Tables for Inspection by Attributes. KL-STD-129 - Xarking for Shipment and Storage. XIL-STD-147 - Palletized nit Loads for 40“ x 48“ Pallets. (Copies of specifica

4、tions, standard, drawings and publications required by suppliers in connection with specific procurement functions should be obtained from the procuring agency or as. directed .by the contracting .officer.) FSC 8125 - -i- MIL-B-1406C i4 March 1975 SUPERSEDING Provided by IHSNot for ResaleNo reproduc

5、tion or networking permitted without license from IHS-,-,-G. S. ”sstal Service r.iiinud (Copfso of clic nonurrl my be obtained fron the Superintendent of documents, 2.2 -. pi. B. Goverumit Printing Uffice, Washington, OC 20402.) eation ea ehe extant specificil iierein. cile lusus An effect on ata of

6、 invitation or bids or request for proposal shall Wm: he follvdiiig documente form a part of this specifi- Enleas a specific issue is identified, tntfGn,nol I.lotor Yrclght TrafElc Association, Ins., Agent iiatiotial. tiocor Frei t Clamif ication (A-ppldcatfori fr copies slisuld be drt?ssed to the A

7、merican Trucking Asoociaeieno, Pnc., Tariff Order Section, 1616 P Street, sltece, KQQB 1106, 222 South l3.versfde Plaza, Chicago, IL 60606, ) urt? generally uvuilablc for reference from libraries. Tliey are also doeributcd msng cechnical groups and using Federn1 agencies, ) * 3.1. tandard product ii

8、c burial bottle delivered uiidcr this specification All like item furnished on any one oiiul Uc the umufneturero csmercinl product y except for any changes necessary Co conply with specification wequirsricnts. amtract, including parrs and subassenblies tercof, oliall be new and inter- changeable. 3.

9、2 11tcrial6 * 3.2.1 Bottle. Tiico Gettle shall be made from either k lim or lead flint gluos. Bo properly annealed mind of such composition that when tested os specified in 4.4.1 and 4.4.2, there shall be no chipping, cracking or showing of scum or Carros ion = It oholl los colorlessy enerald green

10、or mbar color. The bottle shall 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NIL-B-LLiOhC 81 m 7777706 O279368 7 MIL-E-1406C * 3.2.2 Screw cap. The screw cap shall be made from either a melamine or a phenol formaldehyde compound. * 3.2.3 Liners.

11、 ille screw caps shall have cemented in rubber liners, poly- seal or equivalent liners, or vinyl liners. * 3.3 Construction. The burial identification bottle shall be a wide mouth straight side bottle 3-314 inches 2 118 inch high by 1-114 inch - + 118 inch out- side width. There shall be six screw t

12、hreads to the inch. * 3.3.1 Cap to bottle fitness. The bottle and cap .shall be constructed to withstand any hand-screwing of the cap without rupture or breakage. The cap shall firmly fit the bottle with screw threads to match those on the bottle. * 3.3.2 Leakage. Bottles shall not show any evidence

13、 of leakage when tested as specified in 4.4.3. * 3.4 Instruction sheet. Eie instructions shall be printed or typed on a sheet of white paper, approximately 5 inches by 3 inches, using elite type or equal with the following legend: BOTTLE, SCREW CAP , IDENTIFICATION , BURIAL; Federal Stock number 812

14、5-223-7844 Fill out GR Form No. 1, or write identifying information on any suitable piece of paper, seal within the bottle, place bottle in left am pit, and bury with the body. Wrapping of the body should be secured to prevent movement of the bottle, hhen immediate erection of a marker is impractica

15、ble, use second bottle containing like information, and place in the grave, in the center at its head; secure to prevent washing away by rain until a marker can be erected. To effect water-tight closure of the bottle, securely screw cap on bottle, forcing bottle top into liner within cap. * 3.5 Hark

16、ing for identification. Bach burial bottle shall be permanently and distinctly marked on the bottom with molded or pressed figures showing the suppliers name or trademark of such known character as to be readily identified with the supplier. 3.6 Workmanship. The bottles shall be free from imperfecti

17、ons such as rough seams, edges or surfaces, bubbles, blisters, cracks, nicks, 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-cihed iioreiti. The iru uccurrcnee o defects sliull mt excecd the applicable 4.1 ansiuility for inspection. Cd.css otherwi

18、se specified in the gxccpt as otherwise coneroce or purcitiiuc oxdcr, Lhe supplier is responsible for the performance uf all. irisrcctahon roquiree.sntc us specified licreiti. upcciffsd in tiic contract or order, the su;plicr nay use his own or any other iacilitics suitable for che perf ormicc of th

19、o iicpcction requirements sL:t.cif$(?d iiercfki, biilasn diaapprovcd by the Governsent, The Govertirnent rcsblvbljl tlia rit ta pp.rforil; any of the inspections set forth in the sped- fabtxim where such incpsctions are deerml necessary to assura supplies and tiurv$ces confortgi LQ prcscrjbecl rcqui

20、rer: ents 4.2 fiO11ctfoll. u“ampling fr inspection shall tie pcrfomml in accordance with iiPL-SU-105, axcepr: where otheniri? the finna result, osnplln;: plan 01ial.1 be a4 Pollws: 4.2.1.1 Tests shall be perforrretl on samples of The lot size oiiall be expressed In units o one Xiere siioll be ao fai

21、lure of any sample unit to The sample unit dial1 be The inspection fi Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-UIL-B-LqObC 81 7779706 0277370 7 MIL-5- 1406 C * 4.2.1.2 Certification. Components and materials listed below may be accepted on the

22、 basis of a suppliers certificate of compliance or requirecients specified ments specified in applicable paragraphs of this specification: Component Cn ar ac t e 1: is t c Bottle Glass composition 3.2.1 Cap liner Coiriposition 3.2.3 5 Provided by IHSNot for ResaleNo reproduction or networking permit

23、ted without license from IHS-,-,-MIL-B-LYObC 6% m 949440b 0279373 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-d- MIL-B-LLIObC 1 W 7977906 0277372 O i4IL-B-1406C 4.3 Inspection of the end item. The end item shall be examined in accor- dance with

24、 the classification of defects listed in table II. The lot shall consist of all the coinpleted burial bottles offered for inspection at one time. The sample unit shall be one burial bottle. 4.3.1 Visual examination. Tie burial bottles shall be exauined for the defects listed in table II. The inspect

25、ion level shall be level I with an AQL of 4.0 ciefects, expressed in terms of defects per hundred units. TAELE II. Classification of defects hxamfne ilefect Design Appearance Construction and workmanship B Bottles I cps lin-each Liners Instruction sheet iqot as specified Not symetrical in shape ;Jot

26、 wide iouth bottle Xot straight side bottle iiot clear, clean or dry Not colorless or not of a green or mber color Any rough seam, edge or surface Any bubble, blister, crack, nick, chip, pinhole, scratch or flow line Any dirt, grit or foreign material embedded in bottle or cap i.5 s ing 30 not finnl

27、y fit the bottle Cap and bottle do riot withstand hand screw- ing of cap without rupture or breakage Not required number per inch as required 3istorted in Uottle or cap Threads in cap do not tit bottle Liners in caps missing i+ot inaterial specified iiot tight fitting mi t t ed not in accordance wit

28、h req _ -_ iiremznts 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-* 4.3.1.1 IJiLwsioniil examination. Inspection shell be made of the bottle and Any dimension that is not within The inspection level cep for eodplfancc with spcsificd disnsions. E

29、he spoeificd tolcrcinccs shall be classified as a Jcfeect. slralL bo S-2 with an AQL of 2.5 GefcctG, exprcsscd in tem of defects per hundred UnieB. * 4.3.2 Lxanination of preparation for delivery requirements. An exanination skill la aride a cletcminc that: the packaging, packing and m incorrect; il

30、legible; of ir;proper i;UIXXiala and interior) size, location, sequence or mthod o application Any cosiponent iiiiosing, damage or not as specified eoriesntc Inadequate applfcation of cospoticnts , such as : incomplcrc closure of csntaincr flaps, iti- proper taping, loose strapping, Inadequate stapl

31、ing bulacd or distorted container iambor of screw cap bottles per package or shipping container is more or less than required * 4.L3 ikaninntion for palletization. An examination shall be aade to dotcrniiic elicit the pallctiaation complies with the section 5 requirements. Defects shll Be scored in

32、accordance with the list belo:?. sim11 Uc onc pellotizcd unit load fully prepared for delivery. s2z0 siiall be! the nunbcr of pallatizcd unit loads in the end item inspection lor. in feras o defccste per iiundred units. The sample unit The lot ZIG inspection level shall be S-1. with an AQL of 6.5 de

33、fects, expressed Lenzth, width or height exceeds specified mxlmim requirement 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-B-1406C 81 7777906 0279374 4 9 KIL-B-1406 C Examine Palletization Defects dot as specified Pallet pattern not as speci

34、fied Interlocking of loads not as specified Load not bonded with required straps as specified iieight Exceeds maximum load limits barking mitted; incorrect; illegible; of improper size, location, sequence, or method of application 4.4 Test methods. * 4.4.1 Boiling test. Test specimens of the uncappe

35、d glass bottles shall be coupletely immersed in distilled water in a closed vessel having a small steam vent and boiled continuously at 212 F for 6 hours, boiling water being occasionally added to compensate for evaporation loss. The bottles shall be suspended in the water so that they do not come i

36、n contact with the containing vessel. Any bottle which shows corrosion, scm.ing, chipping or cracking as a result of the boiling, shall be considered as having failed the test and shall be cause for rejection of the lot. 4.4.2 Sudden heat test. Test specimens of the uncapped glass bottles shall be i

37、mmersed in tap water at 65 5 5 F and allowed to remain a minimum of 10 niinutes for the bottles to reach a uniform temperature of 65 i 5 F. The bottles shall then be transferred suddenly into a hot water bath, main- tained at a temperature of 155 5 5 IF, for a period of 10 niinutes. This cycle shall

38、 be repeated four times to give a total of five such cycles. The bottles shall be removed from the hot water and cooled slowly Sefore returning to the tap water at 65 F. constitute failure and shall be cause for rejection of the lot. Cracking or chipping of the bottles during test shall * 4.4.3 Leak

39、age. Bott-les shall be capped and placed in a container of water so that they are covered by water for a period of one hour. leakage shall be cause for rejection of the lot. Any evidence of 5. PREPARATION FOR DELIVERY 5.1 Packaging. Packaging shall be level A or C as specified (see 6.2). * 5.1;l Lev

40、el A. Each bottle with cap containing an instruction sheet shall Twenty-fur bottles of one color only, have the cap screwed on finger-tiEht. shall be packaged in a fiberboard box conforning to style RSC, type CF (variety SW), class domestic, grade 175 of PPP-B-636. Lach fiberboard box shall be provi

41、ded with one set of half-slotted, full-height partitions, fabricated from 9 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-B-ltYObC 43 U 999430b 0279375 b H eke 0a6 eatorfa1 as tho box, and so dcciped as to provide individual cells for cecli bot

42、tle. fn lengeh olld our bottles in width. Tile bottles, together with the instruction siicceo Upccificd in 3.4, shall oc placed upright in the individual cells. diccneions of cadi fiberbonrd box shrill Ita +1/4 inches in length, 644 inches In width, und 4 indics in depth. afnm width gumcd papor tape

43、 conforming to type III, grade A of PPP-T-45. * 5. i. 2 Lew1 C (Comercial Packaging) Dottles with caps containing instruction sliccta alia11 e packaged to afford adequate protection against physical damage during 6Iitpncnt from the supplier to tlie first receivine; activity, md elic quantity per pac

44、kage sliall be the same as that nomally used by the oupplfer for retail diseriiiueon. Eadi uct: of partitions sliall be designed to contain six bottles Inside Eox closure sliali, bo secured with 2-inch The package 5.2 Packing. PackSn8 shall be level A, B, or C as specified (see 6.2). * 5.2.1 Lovcl A

45、. Two-liuridred and eighty-eight bottles of one color only, packaged as specified in 5-1, shall be packed in a fiberboard shipping conetiinor conforuing to style RSC, grade V2s of PPP-D-636. Level A packages alia11 be packed flat, two in lcngth, two in width, and three in depth within the sldyping c

46、ontainer. approiliaate 1944 indics in length, 13-3/4 inches in width, and 13-3/4 nchcs in depth. Approxiaaee diniendons ore furnisticd ils B guide only. taeii shipping container shall. be closed, in accordance with method XII, water- proofcd in accordance with riicthod V, and reinforced aa specified

47、 in the appendix of WP-2-636. Inside dimensions of the shipping container shall * 5.2.2 Lcvcl D. Two-hundred and eighty-eight bottles of one color only, packaged as spccified in 5.1, cihall be packed in a fiberboard shipping Containor eonforming to style RSC, type CF (variety SW) or type SF, class U

48、BGCBEIC, grado 275 of BPP-E-636. Level A packages shall be packed flat, Wo in length, two in width, and three in depth within the shipping container. Inside ditxnsions of tho shipping container shall approximate 19-3/4 inches &i length, 13-3/4 inches in width, and 13-5/4 inches in depth. Approximate

49、 diceasions ur furnished as a guidc only, Each shipping container shall be closed in aCcOrdttnce with method II as specified in the appendix of PPP-B-636. Vas, V3s or Vis fiberbaard box fabricated in accordance with PPP-B-636 and closed in accordance with mthod III as specified in the appendix of the container spceif icatlsn. * 5.2.2.1 W