ARMY MIL-B-43587 C-1987 BAGS CHEMICAL PROTECTIVE CLOTHING OUTFIT《化学防护服装置袋》.pdf

1、NIL-B-93587C 4 - 7979906 0375033 b = s -/5-27 MIL-B-43587C SUPERSEDING MIL-B-43587B 31 May 1978 16 January i987 MILITARY SPECIFICATION BAGS, CHEMICAL PROTECTIVE CLOTHING OUTFIT This specification is approved for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. Th

2、is document covers four types of polyethylene bags for enclosing of chemical protective clothing. 1.2 Classification. The bags shall be of the following types as specified (see 6.2). Type 1 - For clothing outfit Type II - For glove and sock set Type III - For clothing outfit (Navy) Type IV _- For sh

3、irt and trouser liners set 2. APPLICABLE DOCUMENTS c .; 2.1 Government documents. 2.1.1 Documents. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents shall be those listed in the issue of the Department of-De

4、fense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation. Beneficial comments (recommendations additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: U.S. Army Natick Research, Development, and

5、 Engineering Center, Natick, 01760-5014, by using the self-addressed Standardiza- tion Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. AMSC NIA FSC 8465 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. THIS DOCUMENT CO

6、NTAINS /y PAGES. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MI L-B-4 3 5 8 7 C SPECIFICATIONS FEDERAL A-A-203 - Paper, Kraft, Untreated L-P-378 - Plastic Sheet and Strip, Thin Gauge, Polyolefin DDD-L-20 - Label: For Clothing, Equipage, and Tenta

7、ge PPP-B-636 - Boxes, Shipping, Fiberboard (General Use) MIL I TARY MIL-L-35078 - Loads, Unit: Preparation of Semiperishable Subsistence Items; Clothing, Personal Equipment and Equipage; General Specification for STANDARI)S FEDERAL. FED-STD-595 - Colars MILITARY MIL-STD-105 - Sampling Procedures and

8、 Tables for Inspection MIL-STD-129 - Marking for Shipment and Storage MIL-STD-147 - Palletized Unit Loads MIL-STD-731 - Quality of Wo0.d Members for Containers and Pallets by Attributes DRAWINGS U.S. ARMY NATICK RESEARCH, DEVELOPMENT, AND ENGINEERING CENTER 8-2-204 - Bag, Chemical Protective Clothin

9、g (Copies of documents required by contractors in connection with specific acquisition functions should be obtained from the contracting activity or as directed by the contracting officer.) * 2.2 Other publications. The following documents form a part of this document to the extent specified herein.

10、 Unless otherwise specified, the issues of the documents which are DOD adopted shall be those listed in the issue of the DODISS specified in the solicitation. Unless otherwise specified, the issues of documents not listed in the DODISS shall be the issues of the nongovernment documents which are cur

11、rent on the date of the solicitation. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-a 4 5 a a -/ MIL-B-435B7C 84 m 7779706 0375033 T m MIL-B-43587C AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) D 882 - Tensile Properties of Thin Plastic Sheet

12、ing D 3951 - Standard Practice for Commercial Packaging (Application for copies should be addressed to the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.) (Technical society and technical association documents are generally available for reference from librarie

13、s. They are also distributed among technical groups and using Federal agencies.) f: 2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited herein, the text of this document shall take precedence. Nothing in this document however, shall supersed

14、e applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 First article, When specified in the contract or purchase order, a sample shall be subjected to first article inspection (see 4.3, 6.2, and 6.3). 3.2 Materials (see 6.4). Jc 3.2.1 - Film. The film us

15、ed in fabricating all bags shall be polyethylene conforming to type I, class 1, grade B, finish 2 of L-P-378 and shall be 0.0080- inch thick, The color of the film shall approximate color 24087 of FED-STD-595. 3.3 Design and construction. The design of all bags shall be as illustrated in Drawing 8-2

16、-204. Bags shall be constructed from the polyethylene film specified in 3.2.1 and sealed on the two sides. One end of the bag shall be fitted with an interlocking reclosable closure which shall be heat sealed to the bag, Excess material beyond the seals shall be trimmed evenly and shall not exceed 1

17、/4 inch. Access to the reclosable closure shall be by a readily torn membrane strip running parallel to the upper edge of the reclosable closure. The membrane strip shall be identified by a red or black stripe. For details of the closure, see Drawing 8-2-204. The bottom edge of the bag shall be left

18、 open to permit insert-ion of the chemical protective clothing. continuous along the entire length of the sides of the bag, and along the entire length of the interlocking reclosable closure. The seals shall be 3.4 Label. Each bag shall be labeled in accordance with type IV, class 3, of The label sh

19、all be clearly legible after being subjected DDD-L-20 except that all printing shall be in eapitals and the legend shall be as specified in 3.3.4. to the ink adhesion test in 4,5.1. The label shall be positioned as shown in Drawing 8-2-204. 3 Provided by IHSNot for ResaleNo reproduction or networkin

20、g permitted without license from IHS-,-,-MIL-Br43587C 3 4.1 Legend. 3.4.1.1 Type I. Each bag shall be marked on the outer surface with the following legend: CLOTHING OUTFIT, CHEMICAL PROTECTIVE, SIZE N SN CONS I STING OF : 1. SET LINERS, SHIRT AND TROUSERS, CHEMICAL PROTECTIVE 3. PAIR SOCKS, CUSHION

21、 SOLE, CHEMICAL PROTECTIVE 1. PAIR GLOVES, COTTON, CHEMICAL PROTECTIVE INSTRUCTIONS FOR USE ITEMS CONTAINED IN THIS PACKAGE HAVE BEEN IMPREGNATED AND ARE READY FOR WEAR i. CHECK GARMENT FOR PROPER FIT, TRADE ITEMS AS REQUIRED. 2. IMPREGNATED SOCKS-ARE WORN WITH FOLLOWING FIELD FOOTWEAR: a. LEATHER C

22、OMBAT BOOTS WITH PROTECTIVE TREATMENT ARE USED IN HOT WEATHER AREAS. b. INSULATED BOOTS ARE USED IN COLD WEATHER AREAS. 3. 4, 5. 6. THE THREE PAIRS OF SOCKS ARE PROTECTIVE FOR 3 CONTINUOUS DAYS STARTING WITH FIRST DAY OF WEAR. AT END OF THIS PERIOD, SOCKS ARE TO BE REIMPREGNATED BY SAME METHODS USED

23、 FOR LINER. REIMPREGNATION OF THREE PAIRS OF SOCKS PROVIDES AN ADDITIONAL 3 DAYS CONTINUOUS PROTECTION. SHIRT AND TROUSER LINERS ARE PROTECTIVE FOR 7 CONTINUOUS DAYS STARTING WITH FIRST DAY OF WEAR. AT THE END OF THIS PERIOD, LINERS MUST BE REIMPREGNATED BY MOBILE LAUNDRY METHOD OR BY USE OF M-13 KI

24、T, THE MOBILE LAUNDRY METHOD PROVIDES AN ADDITIONAL 7 DAYS CONTINUOUS PROTECTION. REIMPREGNATION BY M-13 KIT PROVIDES AN ADDITIONAL 3 DAYS CONTINUOUS PROTECTION. GLOVES ARE PROTECTIVE FOR 3 CONTINUOUS DAYS STARTING WITH FIRST DAY SAME METHODS USED FOR THE LINER. REIMPREGNATION PROVIDES AN ADDITIONAL

25、 3 DAYS CONTINUOUS PROTECTION. OF WEAR, AT END OF THIS PERIOD, GLOVES ARE TO BE REIMPREGNATED BY THIS PACKAGE WITH CHEMICAL PROTECTIVE CLOTHING SHOULD NOT BE EXPOSED TO DIRECT-SUNLIGHT FOR EXTENDED PERIODS OF TIME. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without licens

26、e from IHS-,-,-flIL-B-q3587C 84 m 9777906 0375035 3 m MIL-B-43587C 7. TO OPEN BAG INITIALLY, TEAR TOP OF CLOSURE OFF BAG ALONG TOP OR OUTER EDGE AT THE RED OR BLACK LINE. THE BAG MAY THEN BE OPENED BY PULLING THE TWO PLASTIC LIPS APART. THE BAG CAN BE RECLOSED FOR FURTHER USAGE BY PRESSING THE TWO I

27、NTERLOCKING LIPS FIRMLY TOGETHER ALONG ENTIRE TOP EDGE OF BAG. 3.4.1.2 Type II. Each bag shall be marked on the outer surface with the following legend: GLOVES AND SOCKS SET, CHEMICAL PROTECTIVE, SIZE NSN CONSISTING OF: 3 PAIR SOCKS, CUSHION SOLE, CHEMICAL PROTECTIVE 1 PAIR GLOVES, COTTON, CHEMICAL

28、PROTECTIVE PURPOSE : THE ITEMS IN THIS KIT ARE FOR WEAR WITH THE SUIT, CHEMICAL PROTECTIVE AND CLOTHING OUTFIT, CHEMICAL PROTECTIVE INSTRUCTION FOR USE: ITEMS CONTAINED IN THIS KIT HAVE BEEN IMPREGNATED AND ARE READY FOR WEAR 1. CHECK FOR PROPER FIT. TRADE ITEMS AS REQUIRED. 2, THE GLOVES ARE PROTEC

29、TIVE FOR 3 CONTINUOUS DAYS STARTING WITH FIRST DAY OF WEAR. AT THE END OF THIS PERIOD THEY ARE TO BE REIMPREGNATED BY MOBILE LAUNDRY METHOD OR BY USE OF M-13 KIT. REIMPREGNATION PROVIDES AN ADDITIONAL 3 DAYS CONTINUOUS PROTECTION. 3. IMPREGNATED SOCKS ARE WORN KITH THE FOLLOWING FOOTWEAR: a. LEATHER

30、 COMBAT BOOTS WITH PROTECTIVE TREATMENT ARE USED IN HOT WEATHER AREAS. b. INSULATED BOOTS ARE USED IN COLD WEATHER AREAS. 4. THE THREE PAIRS OF SOCKS ARE PROTECTIVE FOR 3 CONTINUOUS DAYS STARTING WITH FIRST DAY OF WEAR. AT THE END OF THIS PERIOD, SOCKS ARE TO BE IMPREGNATED IN THE SAME MANNER AS THE

31、 GLOVES. REIMPREGNATION OF THREE PAIRS OF SOCKS PROVIDES AN ADDITIONAL 3 DAYS OF CONTINUOUS PROTECTION. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-B-Lt3587C 84 9777906 037503b 5 MIL-B-4358 7C 5. THIS PACKAGE WITH CHEMICAL PROTECTIVE CLOTHI

32、NG SHOULD NOT BE EXPOSED TO DIRECT SUNLIGHT FOR EXTENDED PERIODS OF TIME. 6. TO OPEN BAG INITIALLY, TEAR TOP OF CLOSURE OFF BAG ALONG TOP OR OUTER EDGE AT THE RED Op BLACK LINE. THE BAG MAY THEN BE OPENED BY PULLING THE TWO PLASTIC LIPS APART. THE BAG CAN BE RECLOSED FOR FURTHER USAGE BY PRESSING TH

33、E TWO INTERLOCKING LIPS FIRMLY TOGETHER ALONG ENTIRE TOP EDGE OF BAG. 3.4.1.3 Type III (for Navy application only). Each bag shall be marked on the outer surface with the following legend: NSN CLOTHING, OUTFIT, CHEMICAL PROTECTIVE, SIZE - CONSISTING OF: 1 SET LINERS, SHIRT AND TROUSERS, CHEMICAL PRO

34、TECTIVE 1 PAIR SOCKS, CUSHION SOLE, CHEMICAL PROTECTIVE 1 PAIR GLOVES, COTTON, CHEMICAL PROTECTIVE 1 HOOD, CHEMICAL AGENT PROTECTIVE (FOR USE WITH NAVY MARK V GAS MASK) , INSTRUCTIONS FOR USE ITEMS CONTAINED IN THIS PACKAGE HAVE BEEN IMPREGNATED AND ARE READY FOR WEAR 1. CHECK GARMENT FOR PROPER FIT

35、. TRADE ITEMS IF REQUIRED. 2. THIS PACKAGE WITH CHEMICAL PROTECTIVE CLOTHING SHOULD NOT BE EXPOSED TO DIRECT SUNLIGHT FOR EXTENDED PERIODS OF TIME. 3. TO OPEN BAG INITIALLY, TEAR TOP OF CLOSURE OFF BAG ALONG TOP OR OUTER EDGE AT THE RED OR BLACK LINE. THE BAG MAY THEN BE OPENED BY PULLING THE TWO PL

36、ASTIC LIPS APART. THE BAG CAN BE RECLOSED FOR FURTHER USAGE BY PRESSING THE TWO INTERLOCKING LIPS FIRMLY TOGETHER ALONG ENTIRE TOP EDGE OF BAG. 3.3.1.4 Type IV. Each bag shall be marked on the outer surface the the following legend: NSN SHIRT AND TROUSER SET, CHEMICAL PROTECTIVE, SIZE - CONSISTING O

37、F: 1 SET LINERS, SHIRT AND TROUSERS, CHEMICAL PROTECTIVE, SIZE NSN 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-B-43587C 84 U 7973706 0375037 7 MIL-B-43587C INSTRUCTIONS FOR USE ITEMS CONTAINED IN THIS PACKAGE HAVE BEEN IMPREGNATED AND ARE R

38、EADY FOR WEAR 1. CHECK SHIRT AND TROUSER LINERS FOR PROPER FIT. TRADE ITEMS AS REQUIRED. 2. THESE SHIRT AND TROUSER LINERS ARE PROTECTIVE FOR 7 CONTINUOUS DAYS STARTING WITH FIRST DAY OF WEAR. AT THE END OF THIS PERIOD, SHIRT AND TROUSERS MUST BE REIMPREGNATED BY MOBILE LAUNDRY METHOD OR BY USE OF M

39、-13 KIT, THE MOBILE LAUNDRY METHOD PROVIDES AN ADDITIONAL 7 DAYS CONTINUOUS PROTECTION. REIMPREGNATION BY M-13 KIT PROVIDES AN ADDITIONAL 3 DAYS CONTINUOUS PROTECTION. 3. THIS PACKAGE WITH CHEMICAL PROTECTIVE CLOTHING SHOULD NOT BE EXPOSED TO DIRECT SUNLIGHT FOR EXTENDED PERIODS OF TIME. 4. TO OPEN

40、BAG INITIALLY, TEAR TOP OF CLOSURE OFF BAG ALONG TOP OR OUTER EDGE AT THE RED OR BLACK LINE. THE BAG MAY THEN BE OPENED BY PULLING THE TWO PLASTIC LIPS APART, THE BAG CAN BE RECLOSED FOR FURTHER USAGE BY PRESSING THE TWO INTERLOCKING LIPS FIRMLY TOGETHER ALONG ENTIRE TOP EDGE OF BAG. 5. WEAR SHIRT A

41、ND TROUSER LINERS WITH THE SEPARATE ISSUE GLOVE AND SOCK SET CHEMICAL PROTECTIVE OR WITH THE SEPARATE ISSUE GLOVE SET CHEMICAL PROTECTIVE AND FOOTWEAR COVERS CHEMICAL PROTECTIVE (OVERBOOT). 3.5 Dimensions. All dimensions and tolerances for all types of bags shall be as shown in Drawing 8-2-204. 3.6

42、Performance. 3.6.1 Seam strength. The breaking strength of the seams shall be not less than 60 percent of the breaking strength of the film when tested as specified in 4.5.2. 3.6.2 Closure strength and seam continuity. The closure for the bag shall not break, tear, or otherwise become unsuitable for

43、 the intended use when tested as specified in 4.5.3. The seams shall be continuous along the entire length of the sides of the bag and along the entire length of the interlocking reclosable closure and can be verified by observing whether any leakage occurs when tested as specified in 4.5.3. 7 Provi

44、ded by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-B-Ll357C L( 7979706 0375038 7 = MIL-B-43587C 9; 3.7 Workmanship. The finished bag shall be clean.and free from gels, streaks, holes, cracks, blisters, fish eyes, scratches, mottling, particles of foreign

45、 matter, and undispersed raw material. Raw edges shall be free of nicks and cuts. The finished bag shall conform to the quality of product established by this document. The occurrence.of defects shall not exceed the applicable acceptable quality levels. 4. QUALITY ASSURANCE PROVISIONS 4.1 Responsibi

46、lity for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use his own or any other facili

47、ties suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in this document where such inspections are deemed necessary to assure supplies and services conform

48、to prescribed requirements. 4.1.1 Responsibility for compliance. All items must meet all requirements of sections 3 and 5. The inspections set forth in this document shall become a part of the contractors overall inspection system or quality program. absence of any inspection requirements in the doc

49、ument shall not relieve the - contractor of the responsibility of assuring that all products or supplies submitted to the Government f.ar acceptance comply with all requirements of the contract. known defective material, either indicated or actual, nor does it commit the Government to acceptance of defective material. The Sampling in quality conformance does not authorize submission of 4.1.2 Dimensional requirements. Unless otherwise s