ARMY MIL-C-12369 F-1974 CLOTH BALLISTIC NYLON《防弹尼龙》.pdf

1、MIL-C-L2367F 83 m 7777706 0378262 6 m 5+-37-/5+- .- MIL-C-l2369F(GL) 28 June 1974 SUPERSEDING MIL-C-12369E (GL) 25 July 1968 MILITARY SPECIFICATION CLOTH, BALLISTIC, NYLON This specification is approved for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This sp

2、ecification covers nylon ballistic minimum ballistic resistance. cloth having a specified * 1.2 Classification. The cloth shall be of the follow ,ing classes as specified: Class 1 - Natural or dyed, untreated Class 2 - Natural or dyed, water repellent treated Class 3 - Dyed, camouflage printed and w

3、ater repellent treated 2. APPLICABLE DOCUMENTS * 2.1 The following documents, of the issue in effect on date of invitation for bids or request for proposal, form a part of this specification to the extent specified herein: SPECIFICATIONS FEDERAL PPP-P-1133 - Packaging and Packing of Synthetic Fiber

4、Fabrics MILITARY MIL-P-46593 - Projectile, Calibers .22, .30, .50 and .20 MM Fragment - Simulating STANDARDS FEDERAL FED-STD-4 - Glossary of Fabric Imperfections FED-STD-191 - -.Textile Test Methods Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-flI

5、L-C-L23b7F 83 m 7777706 O378263 8 m MILITARY MIL-STD-105 - Sampling Procedures and Tables for Inspection MIL-STD-662 - Ballistic Acceptance Test Method for Personal by Attributes Amor Material (Copies of specifications, standards, drawings and publications required by suppliers in connection with sp

6、ecific procurement functions should be obtained from the procuring activity or as directed by the contracting officer.) LAWS AND REGULATIONS: Rules and Regulations Under the Textile Fiber Products Identification Act. (Copies may be obtained without charge from the Federal Trade Commission, Washingto

7、n, DC 20580 .) 3. REQUIREhMTS 3.1 Standard sample. The dyed and/or camouflage printed and water-repellent treated cloth shall match their respective standards for shade and shall be equal to or better than the standard samples with respect to all characteristics for which the standards are reference

8、d (see 6.4 and 6.5). 3.2 Bid sample and laboratory report approval. Unless otherwise specified (see 6.2), at the time of submission of a bid, the bidder shall submit to the contracting officer a sample of 15 yards and a certified copy of a recent laboratory report covering the cloth which he propose

9、s to deliver. Unless other- wise specified by the contracting officer, the bidder shall certify that the sample submitted was manufactured using the facilities and processes he proposes to use in the manufacture of the cloth. This laboratory report shall contain test data which demonstrate that the

10、finished cloth which the bidder proposes to deliver has been tested, and the extent to which the cloth complies with the performance requirements of this specification (see 6.7). Ballistic performance on the 15-yard sample, as indicated by the V50 limit, shall be conducted in a Government laboratory

11、 to be designated by the contracting officer. Any of the following types. of reports will be satisfactory from the standpoint of the non- ballistic requirements. -. (a) An independeat or comercial laboratory report. (b) The bidders own laboratory report. (c) A Government laboratory report from a con

12、tract within not more - “ than six months of date of submission of bid. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-L23bSF 83 977770b O378264 T The purpose of the above requirements is to assist the Government to determine the capability

13、of bidders to manufacture a cloth meeting all requirements of this specification. The submission of an acceptable sample under this requirement shall not be construed as relieving a supplier from subsequently meeting all requirements of this specification cm all deliveries. 3.3 Material. 3.3.1 Nylon

14、. The nylon shall be bright, high tenacity, continuous filament, prepared from hexamethylene diamine and adipic acid, or its derivatives. It shall have a minimum melting point of 472OF. when tested as specified in 4.4. 3.3.2 Ys. The warp and filling yarns shall be 1050 denier +, 3 percent, multifila

15、ment, with 3 to 4 turns per inch “Z“ twist when tested as specified in 4.4. * 3.4 Color. 3.4.1 Class 1 and class 2. Unless otherwise specified, the color of the finished class 1 and class 2 cloth shall be undyed (natural). When a color is specified (see 6.2), the color of the dyed and finished cloth

16、 shall match the standard sample and shall be obtained by piece dyeing using neutral pre- metallized dyes or neutral dyeing acid dyes, applied at a pH value consistent with the maximum temperature that can be maintained in the equipment used (see 6.5.1). 3.4.2 Class 3. The 4-color U.S. Army Pattern

17、1948 shall be obtained by roller or automatic screen printing. The dyeing of the ground shade and the printing of the cloth shall be accomplished with colorants as specified in 3.4.6 to provide a visual match to the several shades of the standard sample and to provide the infrared reflectance levels

18、 specified in 3.4.7. The cloth shall be dyed to ground shade approximately the Yellow Green 354 area of the pattern (see 6.6) and subsequently over printed using 4 colors, Yellow Green 354, Dark Green 355, Brown 356 and Black 357. A resin bonded pigment system shall be required. * 3.4.3 Wtching. The

19、 color of the dyed or dyed and printed finished cloth shall match-the standard sample under natural (north sky) daylight or artificial daylight haviGg a color temperature of 7500 Kelvin and shall be a good approxi- mation to the standard sample under incandescent lamplight at 2800O Kelvin. . % 3 Pro

20、vided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3.4.4 Colorfastness. The dyed or dyed and prfnted finished cloth shall show colorfastness to light equal to or better than the standard sample when tested as specified in 4.4. 3.4.5 Pattern execution -(das

21、s 3). The pattern shall reproduce the standard sample in respect to design, .colors and reglstration of the respective areas. .75 inches. Each pattern area shall show solid coverage; skitteriness exceeding that shown by the standard sample in any of the printed areas will not be accept- abPe. The pa

22、ttern repeat of the dyed, printed and finished cloth shall be 16.75 +_ * 3.4.6 -Dye formulation (class 3). The areas of the pattern shall be printed with the following (see 3.4.2): Yellow Green 354 Yellow 4234 RB Bed 4000 RB 60 Blue 4400 RB 21 Dark Green 355 Green 4330 ECB 3)lack 4600 RB 10 Yellow 4

23、234 33 i(ed GdBo m60 Brown 356 Yellow 4234 BB Red 4000 RB 60 Black 4600 RB 10 3lack 357 Black 4600 RB 10 %lmwxl cm0 m * 3.4.7 hfrared reflectance (class 3). The followLng zefleetance values .masureci ac 1 -micron shall be achieved in the printing (see 6.91, when %estml na speeified In 4.4. Color Per

24、cent 3.5 physical requirements, The finished cloth shall conform to the physical requirements specified in table I when tested a8 specified in 4.4. 4 I I I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-L2367F 83 M 777770b 0378266 3 m MIL-C-l2

25、369F(GL) TABLE *I. Physical requirements Overall Weight per Yams per inch Breaking strength Ultimate elongation width sq. yd. (minimum) (minimum) (minimum) (see 6,3.2) Warp Filling Warp Filling Warp Filling Inches Ounces Pounds Pounds Percent Percent (min) (W) (min) (m=) 48 49 13.5 15.0 46 42 900 82

26、5 25 20 3.5.1 Weave. The weave shall be a 2 by 2 basket weave with two ends weaving as one and two picks weaving as one. * 3.6 Finish. * 3,6.1 Class 1. The class 1 cloth shall be thoroughly scoured (see 6.3.1) and heat-treated (see 6.3.3) and shall be processed as to meet the ballistic resistance re

27、quirements of this specification (see 3.12). The supplier shall certify that no additive or leading material has been applied in the manu- facture or finishing of the cloth without specific approval of the contracting officer . * 3.6.2 Class 2 and 3. The dass 2 and 3 cloth shall be thoroughly scoure

28、d (see 6.3.1) and heat-treated (see 6.3.3) and shall be given a water repellent treatment consisting of one of the approved water repellent formulations (see 6.8). The cloth shall be processed so as to meet the ballistic resistance requirements of this specification (see 3.12). The supplier shall ce

29、rtify that no additive or leading material has been applied in the manufacture or finishing of the cloth without specific approval of the contracting officer, * 3.7 Spray rating (class 2 and 3). The results of the three individual determinations on the water repellent treated cloth sample for spray

30、rating shall be equal to or better than 100, 100, 90, when tested as specified in 4.4. * 3.8 Dynamic absorption (class 2 and 3) , - The treated cloth shall not have a dynamic absorption percent greater than 20, when tested as specified in 4.4. * 3.9 Resistance to organic liquid (class 2 and 3). The

31、treated cloth shall not show wetting by n-dodecane, when tested as specified in 4.4. * 3.10 pH. The pH valve of the water extract of the finished cloth shall be no lower than 5.0 nor more than 8.5 when tested as specified in 4,4, 5 Provided by IHSNot for ResaleNo reproduction or networking permitted

32、 without license from IHS-,-,-I MIL-C-l2369F(GL) 3.11 Shrinkage. The finished cloth shall not shrink.more than 3.0 percent in the warp and not more than 2.0 percent in .the filling when tested as specified in 4.4. , 3.12 $allistic resistance The ballistic limit Vs0 for 12 layers of unbonded cloth sh

33、all be not less than 1225 feet per second when tested as specified in 4.4. 3.13 Length and put-up. Unless otherwise specified -(see 6,2)., the cloth shall be furnished in rolls of -continuous lengths of 80 to 120 yards, Each roll shall contain not more than two pieces and no single piece shall be le

34、ss than 40 yards in length. The cloth shall be put in full width rolls as speci- fied in PPP-P-1133 3.34 Fiber identification. Each piece of cloth shall be labeled, tkketed or invoiced for fiber content in accordance with the Rules and Regulations Under the Textlle Fiber Products Identification Act.

35、 * 3.15 Marking. The Pace sPde of the cloth shall be ddentified by applying a stamping on .that sfde of the cloth with the word “Sace“ at each end of .the Eo11 . 3.16 ,Workmanship. %e fnished cloth shall conform M the .quality .and grade OP product estdblished 4p -13 specification. The o.ccurrence ;

36、of defects shall not exceed the point kwel specslfded. 4- QUALm $SS- .VI 4.1 Besponsibilfty or inspection. Lfnless otherwise specifzed h the contract or purchase order, the supplier is responsible gor the periforname I of all hapecGLon requirements as specified hereln. Zxcept as othe=ise specifkl 3n

37、 *#e contract or arder, the supplier may use his own or .any ather Sacblight $0 perfom any of the inspections set eorth ia at 190F., a pH of 5 is adequate; at 200F., the pH may fall to between 5.5 and 6.0. In a completely closed jig where temperatures of 212-215F. are possible, the pH of 6.7 is adeq

38、uate to achieve exhaustion and maintain ballistics. A pH value below the value of 4.0 should not be used under any temperature condition as this will deteriorate the ballistic performance of the fabric. * 6.6 A suggested but not mandatory dyestuff formulation for the dyeing of the ground shade Yello

39、w Green 354 for class 3 cloth is as follows : Neutral Premetallized Dyes Acid Yellow 151 or 129 Acid Orange 85 Acid Green 70 Acid Green 57 Level Dyeing Acid Dyes Acid Blue 40 CI 62125 Acid Orange 128 Acid Red B or Acid Red 337 01: 6.7 The potential suppliers are advised to submit samples to the Gove

40、rnment for ballistic testing as soon as practical so that they would be in a position to satisfy the bid sample requirements contained in 3.2 . when the cloth is procured. * 6.8 Approval of the water repellent formulation is the responsibility of the U,S: Army Natick Laboratories, Natick, MA 01760 a

41、nd is based on more . extensive tests which are not set forth in this specification. Because -of the time necessary to conduct. full evaluation, only those chemical formulations already approved and so listed in the invitation for bids or request for proposal shall be considered. * 6.9 The basic ins

42、trument for measuring the infrared reflectance is the General Electric Spectrophotmeter, but other instruments can be used, such as Beckman Du or Dk Spectrophotometers, the Cary 14 Spectrophotometers, or the infrared photometer available from Hunter Associates Laboratory, Fairfax, VA 22030. 14 Provi

43、ded by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-l2369F(GL) 6.10 The margins of this specification are marked with an asterisk (*) to indicate where (additions, modifications, corrections, deletions) from the previous issue were made. This was done a

44、s a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and suppliers are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Custodian : Preparing activity: &view act ivi.ty : Project No. 8305-All7 Army - -W) au. SWVERNMENTPRMlffi OFFICE: 1974-603-120/37 15 I I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-