ARMY MIL-C-44371 A-1991 COAT AIRCREW COMBAT《战斗空勤员服》.pdf

1、flI$sCY437LA 4 W 999990b 0495873 b * MILrc-4437lA 30 Seunnmendations, additions, deletions) and any pertinent data wfuch may be use in hproving this document should be adressed to: Center, Natick, MA 01760-5019 by ushg the Standardi zation bcment lp-ovement Proposal (DE Fonn 1426) appearing at the e

2、rd of this document or by letter. U.S. Anny Natick Research, Development, and n-igheering Z4MSC N/A FSC 8415 DISTRImN STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MILK-4 4 3 7 IA

3、 2. zlPPLx!ABLE rxxmmm 2.1 Gaverrrment documents. * 2.1.1 spec ifications, standardc, and handbookc. The following specifi- cations, standardc, and handbookc form a part of this document to tlie extent specified herein. Unless otherwise specified, the issues of these doc=uments are thce listed in th

4、e issue of the Department of Defense index of Specifications and Skmlards (DODISS) and supplement thereto, cited in the colicitation (see 6.2). SPEICIFICATIONS A-A-203 - A-A-50195 - A-A-50198 - A-A-50199 - V-B-871 - V-F-106 - DDD-G20 - PPP-B-636 - MILITARY MIGW-5664 - MIGF-21840 - MIGG35078 - MIL-T-

5、43709 - MIM-44100 - MI=-83429 - ST?MXRIX FED-STD-595 - FED-STD-751 - MILJTARY MIL-STD-105 - MIGSTD-129 - Paper, Kraft, Untreated Thread, Aramid Thread, Ghp, Cotton, Wittonhole Thread, Polyester Core, Cotton- or Witton, Sewing Hole, and Witton, Staple Fasteners, Slide, Interlocking -1: For Clothing,

6、Equipage and Tentage, Boxes , Shipping, Fibe Clothing, percona1 Equipment and Equipage; General Specification For Tape, Textile, Aramid Thread, Para-Aramid, Spun, Intemediate Moduluc Cloth, Plain and Basket Weave, Aramid colors used in Gavenrment Procurt Stitches, Seairic, and Stitchings Sampling Pr

7、ocedures and Tables for IncpeCtion Marking or Shipment and Storage by Attributes 1 01 i 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIb-C-44371A 84 E 9999906 0495875 T = MIM-4 4 3 7 IA MIGSTD-147 - yalletized Unit imds MIGSTD-731 - Quality of W

8、ood Members for Containers and Pallets (unless othmise indicated, copies of federal an miiitary specifications, standardc, and handbookc are available fm the Standardi zation Documents order Deck, l3uilding 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.) * 2.2 Non-Gmernment rwblications. nie f

9、ollawing documents form a part of this docxmient to the extent specified herein. Unless otherwise specified, the issues of the documents which are DoD adopted are thcse listed in the issue of the DODISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the

10、DODISS are the issues of the documents cited in the solicitation (see 6.2). %c AMERICAN ASSOCIATION OF TEXTIm CXENsTs AND aX3RIsrS (AATCC) AATCC photographic Ccprrparative Rating of Single and Double Needle Seams (Mkthd 88B, two photas) (Application for copies shad be addressed to the American %soci

11、ation of Textile chemists and Colorists, P.O. Box 12215, Research Triangle Park, NC 27709-2215. ) D 3951 - standard Practice for mnexcia Packaging (Application for copies should be addresse to the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103-1187.) (Non-GOvenm

12、ient standardc and other publications are normally available fm the organizations that prepare or distribute the documents. documentC also may be available in or through libraries or other hfonna- tiona1 cervices.) niese 2.3 order of m=ceence. in the event of a conflict between the text of Nothing i

13、n this document, hawever, supersedec applicable this document and the references cited herein, the text of this doc;.ument takes precedence. laws and regulations unless a specific exemption has been obtained. 3. - 3.1 First article. When specified (see 6.2), a sample shall be subjected to first arti

14、cle inspection (see 6.3) in accordam=e with 4.3. practical as long as it meetc the requirementc of this specification. 3.2 Material. It is encouraged that recycled material he used when 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-4437LA 8

15、4 9999906 O495876 L m MIL-C-4437 lA * 3.2.1 Basic material. The basic material for the class 1 coat shall be plain weave aramid printed with a Woodland Camouflage Pattern conforming to type II, class 5 of MIL-C-83429. The basic material for the class 2 coat shall be plain weave aramid conforming to

16、type II, class 6 of MIL-C-83429. The color for the class 2 shall be Tan 380. * 3.2.2 Material for pencil pockets. be basic material, ground shade cloth, or printed seconds cloth. for class 1 shall be colored to a ground shade conforming to class 5 of MIL-C-83429 prior to overprinting of the camoufla

17、ge pattern. cloth shall meet the physical, mechanical and dimencional requirements of the respective finished fabric. rejected only for defects pertaining to color, infrared reflectance, or camouflage print patterns cited in MIL-C-83429 for the class 1 coat. The cloth for the pencil pockets shall Th

18、e cloth Ground shade Printed seconds shall be cloth which has been I- I 3.2.3 Webbinq, elastic. The webbing for the waist elastic shall be bleached or unbleached and shall conform to type I, class 2 of MIL-W-5664, except shuttleless loom construction is permitted. The width of the webbing shall be 1

19、-1/2 inches. * 3.2.4 Hook and loop fastener tape. The hook and loop fastener tapes shall be 5/8, 1 and 1-1/2 inches (as specified) in width and shall conform to type I, class 1 of MIL-F-21840. The color for class 1 shall be Olive Green 106 and for class 2 shall be Tan 380. The colorfastness requirem

20、ents shall not apply 3.2.5 Slide fastener. The slide fasteners listed below shall be an automatic lock left hand, separating type brass with a black chemical finish and conform to type IV, style 8, size MS of V-F-106. Slide fastener lenqths (inches) Size LRnqth X-Small - Short X-Small - Regular Smal

21、l - Short Small - Regular X-Small - Long Small - Long Medium - Short Medium - Regular Medium - Long Large - Short Large - Regular Large - Long X-Large - Short X-Large - Regular X-Large - Long 15 15-1/2 16 15-1/2 16 16-1/2 16 16-1/2 17 16-1/2 17 17-1/2 17 17-1/2 18 I 1 I 4 Provided by IHSNot for Resa

22、leNo reproduction or networking permitted without license from IHS-,-,-MIL-C-4437LA 4 9999906 0495877 3 I I I I l I I I I t i I I MIL-C-4437 lA 3.2.5.1 Pencil and utility poc ket. The slide fastener for the pencil and utility pocket shall conform to type I, style 7, size M, short tab pull, 4-3/4 inc

23、h chain of V-F-106. * 3.2.5.2 Slide fastener tape. The slide fastener tape shall be aramid, 3/4 inch wide and shall be of sufficient length to comply with the slide fastener attachment operation (see table I, operation 21). The color for class 1 shall be Olive Green 106 and for class 2 shall be Tan

24、380. The finished tape shall show colorfastness to light and laundering equal to or better than the standard sample. When no standard sample is available, the “good“ fastness to laundering. - tape shall show “fair“ fastness to light after 6 standan fading hours, and e * 3.2.5.3 Slide fastener thonqs

25、. Each slide fastener shall be furnished with a thong of sufficient length to masure 2-1/2 to 3 inches (folded) when attached to the slider pull tab. The thongs shall be 1/4 inch wide conform- ing to MIL-T-43709. The color for class 1 shall be Olive Green 106 and for class 2 shall be Tan 380. Ends o

26、f the thongs shall be seared or dipped in a colorless, non-combustible resin (see 6.5). The thong shall be attached to slider pull tab as specified in table I, operation 5. * 3.2.6 Button. The button for the neck closure shall conform to type II, class D, style 26, 30-line of V-B-871. The color for

27、class 1 shall be Olive Green BP, Cable No. 62016 and for class 2 shall be Tan AJ, Cable No. 62028. The button shall have a dull finish. * 3.2.7 Gime. shall conform to type I or II, size No. 8 of A-A-50198. 1 shall be Camouflage Green 483 approximating color chip 34094 of FED-STD-595 and for class 2

28、shall be Tan 380. The cotton gimp for reinforcing the neck closure buttonhole The color for class 3.2.8 Thread. * 3.2.8.1 Aramid and para-aramid. The thread shall be aramid, 40 and 60 tex conforming to A-A-50195. Para-aramid spun staple thread, size T-35 for class 1 and size T-50 for class 2, confor

29、ming to MIL-T-44100 may be used as an alternate to aramid 40 and 60 tex. The color of the thread for class 1 shall be Camouflage Green 483 approximating color chip 34094 of FED-STD-595 and for class 2 shall be Tan 380. The thread shall shm fastness to laundering equal to or better than the standard

30、sample. When no standard sample is available, the thread shall show “good“ fastness to laundering. * 3.2.8.2 Cotton-covered polyester core. Cotton-covered polyester core thread conforming to ticket No. 50, 2 ply of A-A-50199 my be used as an alternate thread for bartacking. The color of the thread f

31、or class 1 shall be Camouflage Green 483 approximating color chip 34094 of FED-STD-595 and for class 2 shall be Tan 380, and shall shm fastness to laundering equal to or better than the standard sample. When no standard sample is available, the thread shall show “good“ fastness to laundering. F J Pr

32、ovided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-flIL-C-4437LA 84 777770b 0475838 5 MIM-44 37 IA * 3.2.9 Labels. Each coat shall have an identification label, an instruc- tion label, and a size label or a ccanbhtion identification and instruction label.

33、 of the label for class 1 chal1 be Medium Green, Cable No. 70034, 70130 or 70131 and the color for class 2 shall be m, Cable No. 70188. fastness to laundering requirements of WD-G20 shall apply. * 3.2.9.1 Identification label. The identification label shall conform to type VI, Iiie labels shall conf

34、onn to the requirementc listed belaw. Iiie color The class 1 of DEFG20. * 3.2.9.2 Instruction label. Te instruction label shall wnfom to type v, class 3 of DDD-G20. information: !he label shall contain the follawing OOAT, AIRCREW, OCMBAT 1. Wear outcide of troucerS. 2. Ibis coat is of law flammabili

35、ty. No other special flame resistant treatment is required. 3. I-mKvMa chine Washing: mt press cycle in wann water with a mild laundry detergent. 5. Rins-: Rinse thoroughly in clear wann water after laurdering. 6. Dwhq: “ble dry at law heat (130%). Remove immediately from Detergent must be removed o

36、r fabric flame resistance wiii be reduced. dryer. lb drip dry, remove from water and place on a rustproof hanger. 7. WARNING: fasteners engaged. Launder with the slide fastmer and hook and loop Do not press hook and loop fasteners. * 3.2.9.3 combination label. A combination identification/instructio

37、n label may be used. It shall confonn to type VI, class 15 of DDD-G20. * 3.2.9.4 Size label. The size label shall confonn to type VI, class 2 of iXXhG20. fimcters and shall contain the following infomtion, as applicable: Ihe size information shall be printed with not less than 10 point 6 Provided by

38、 IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-4437LA 84 9999906 0495879 7 I I I I 1 l I l I l I e I l l 1 I l , MIM-4437lA X-small - Short X-Small - RWar x-small - mnq Height: Wan 63 to 67 in. Stock No. NATO Size: 6070/7484 chest: up to 33 in. Height: F

39、rcan 67 to 71 in. Stock No. NATO Size: 7080/7484 mest: up to 33 in. Height: From 71 to 75 h. Stock No. NATU Size: 8090/7484 mest: up to 33 in. Small - Short Small - Resular Small - mq Height: Frcan 67 to 71 in. mest: From 33 to 37 in. Stock No. NATO Size: 7080/8494 Height: From 71 to 75 in. mest: Fr

40、am 33 to 37 in. Stock No. NATO Size: 8090/8494 - Height: Wan 63 to 67 in. chest: Fram 33 to 37 in. Stock No. NATO Size: 6070/8494 Medium - Short I Medium - Reqular Medium - mnq Height: From 63 to 67 in. Chest: Fmn 37 to 41 in. Stock No. NATO Size: 6070/9404 Height: Frcnn 67 to 71 in. Chest: Fram 37

41、to 41 in. Stock No. NATO Size: 7080/9404 Height: Frm 71 to 75 in. Chest: Fram 37 to 41 in. Stock No. NAT Size: 8090/9404 iame - Short Larse - Resular Larse - onq Height: Fram 63 to 67 in. Chest: FKJm 41 to 45 in. Stock No. NAM Size: 6070/0414 0 Height: FrcAn 67 to 71 in. Chest: Fram 41 to 45 h. Stoc

42、k No. NATO Size: 7080/0414 Height: Fram 71 to 75 in. Chest: From 41 to 45 h. Stock No. NAT Size: 8090/0414 X-Lars e - Short Height: Fram 63 to 67 in. Chest: Above 45 in. Stock No. NATO Size: 6070/1424 X-lAKl e - Reqular X-Irq e - Lionq Height: From 67 to 71 in. chest: Above 45 in. Stock No. NATO Siz

43、e: 7080/1424 Height: Fram 71 to 75 in. Ckest: Abwe 45 in. Stock No. NAT Size: 8090/1424 3.3 Decim. nie coat is of a %ush type“ design with two chest and two lower patch pocJcets with flap, left sleeve utility pocket, hook and loop fastener tape adjustment tabs for the waist, collar and wrist, and a

44、slide fastener front clawre. a mkrocihte air hose. nie coat also has two openings with flaps to allm through passage of 3.4 Fime. Figure 1 is furnished for information only. If there are any im=oncistencies between the written specification and the figure, the written specification shall control. 3.

45、5 Fatterns. Standard patterns, which provide a 1/2 -t 1/8, -0 inch seam alluwance for double-lapped and double-stitched ceamc 3/8 + 1/8, -0 inch seam alawance for single needle ceams, except where otherwise specified, will be furnished by the Government. The standard patterns shall not be altered in

46、 any 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1 I MIL-C-4437LA 84 9999906 0495880 3 MIGC-44 37 lA way and are to be used as a de for cutting the contractors working pattems. ?he working pattems shall be identical to the standard patterns. *

47、3.5.1 List of pattern 13aTtc . fm material in acCordam=e with the pattern parts indicated beim. Ihe ccanponentc of the coat shall be cut List of ?3attrn tmrts Material Namenclature cut parts Aramid, plain weave Front 2 Back 1 collar 2 collar (one-piece) J 1 Top sleeve 2 Urder sleeve 2 Chest pocket 2

48、 Chest pocket flap 2 Chest percil pocket 1 mer pocket 2 mer pocket flap 2 Air hose opening flap 2 Air hcse Opening facing 2 waist tunnel 1 Waist adjustment tab 2 Wrist adjustment tab 4 Wrist adjustment tab (one piece) 2/ 2 utility pcket 1 utility pocket flap 1 pper pencil pocket (utility pocket) mer

49、 pemil pocket (utility pocket) Slide fastener flap (utility pocket) 1 1 1 collar tab 2 mlate Aixkose opening J Wen altemate one-piece collar is uced, disregard separate collar piece. 2J When altemate one-piece wrist adjustment tab is used, disregard separate wrist adjuchent tab piece. 3.6 nstruction. 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,