ARMY MIL-C-48018-1972 CONNECTOR ELECTRICAL《电气连接器》.pdf

1、-Preservation, Methods of -Camp1 ing Procedures and Tables for inspection by At t r i butes -Lbt Numbering of Ammunition -Packaging, Packing and Marking for Shipments of Inert Ammunition Components FSC 1110 Licensed by Information Handling ServicesMk-C-48018 (MU) a DRAW I NGS PICATINNY ARSENAL 88083

2、62-Packing and Marking for Storage 8883535-Bag, Packing, for Repair Parts 922 1 103- Connector, Elect r i ca 1 92203 1 O- 1 -Screw, Connector 92203 17- Pin, Guide, Connector 9220316-connector Body Assembly 9220319-Body Connector 9220320- Insulator, Connector 92203234 leeve 9220322-Adhes ive Sealant

3、ET922 1 103- Equ i pment Tabu 1 at ion and Shipment (Copias of specifications, standards, drawings, and publica- tions required by suppliers in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer.) 3. REQU I REMENTS

4、3.1 Materials. The contractor chal 1 furnish objective evidence (see 6.2) that the material complies with the speci- fications listed on the applicable drawing. 3.2 Assembly. The connector shall comply with all requirements specified on the drawing (dwg) 9221103, with all requirements specified here

5、in, and with the requirements of all applicable specifications to the extent specified on the drawing and herein. 3.3 -L_- Tool manufacturing coG1 (T.M.C. 1. When T.M.C. is specified herein, five consecutive parts which comply with drawing dimensions will constitute proper initial tool control accep

6、tance. During normal production, five parts shall be selected at the start and at the end of each dayP,s production (for a minimum of 10 parts) and examined as speci- fied in the applicable paragraph in 4.3.2.1, In addition, five consecutive parts shall be examined as specified in the appl icable pa

7、ragraph in 4.3.2.1 whenver the manufacturing tool requires maintenance. Failure of any part to comply with any of the examinations specified in 4.3.2.1 shall re- ject the lot of productior under consideration, Licensed by Information Handling ServicesLicensed by Information Handling ServicesMIL-C-qB

8、OltB 11 i 77777Ob 0315V53 b if MIL-C-48018 (MU ) 4.3.1.2 - In9ection -y_- lot. A lot or batch and its formation, size, and presentation is described in MIL-STD- 105, Section 5. Accordingly, a lot shall mean an inspection lot and a batch shall mean an inspection batch for the purpose of this specific

9、ation. The manner in which each inspection lot or batch is to be presented and identified by the contractor, shall be designated or approved by the Government representat ive. characteristi& shall require 100 pe:rcentinspection of all items in the inspection lot. A sample shall be selected at random

10、 from each inspection lot in accordance with the applicable major or minor characteristic table (see Table I, II, 111, and Table IV), and inspected for all characteristics in the applicable classification. Ani characteristics in the sample found to be defective shall reject the inspection lot. Seque

11、nce for the inspection of characteristics in each classification need not be fol lowed as long as all characteristic inspections are performed. 4.3.2 Product inspection - examination. Critical 4 Licensed by Information Handling ServicesLot Size -y_ 1-72 73 74 75 76 77 78 79 80 81-82 83 84 85 86 87 8

12、8-89 90 91 92 93 94-95 95 97 98 99- 1 O0 1 o1 102 103 104- 105 106 107 108- 109 110 111 112-1 13 114 115 116-1 17 118 119 120-121 122 123-124 125 126-127 128 129-130 Table I MTL-C-48018( MU) Major Characteristics for War Reserve Items al 1 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91

13、92 93 94 95 96 97 98 99 1 O0 1 o1 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 140-141 142 143-144 145 146-147 148-149 150 151-152 153-154 155-156 157 158- 159 160-161 162-163 164- 165 166- 167 169-170 171-172 173-174 175-176 177-178 179-180 181-182 183-184 185-187 188-789 190-191

14、 192-193 194-195 196-197 198-200 201 -202 2 O3 -2 04 205-207 208-209 210-212 213-214 215-217 218-219 220-222 223-224 225-227 228-230 23 1-232 233-235 236-238 168 Sample Size Lot Size Sample Sample Size Lot Size Size Lot Size 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142

15、 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 i66 167 168 169 170 256-259 260-262 263-265 266-268 269-271 272-275 276-278 279-282 283-285 286-289 290-293 294-296 297-300 301 -304 3 05-3 08 309-312 313-316 3 17-320 321 -324 325-329 33 0-333 334-338 3 39

16、-342 343-347 348 -3 52 353-356 357-361 362-366 367-372 373-377 378-382 383-388 389-393 394-399 4 00- 4 05 406-41 1 421-417 418-424 425-430 43 1-437 438 -443 444-450 451 -457 458-465 466-472 473-480 481-488 5 177 178 179 180 181 182 183 184 185 186 187 -1 88 189 190 191 192 193 194 195 196 197 198 19

17、9 200 201 2 02 2 O3 2 04 2 os 2 06 2 07 2 08 2 O9 210 211 212 213 214 215 216 217 218 219 220 221 222 223 541-549 550-559 560- 569 57 0-579 580-590 591 -601 602-613 614-625 626-637 638-649 650-662 663-676 677-690 691-704 7 05- 7 19 720-735 736-751 752 - 768 769-785 786 - 8 O4 805-823 824-842 843 -86

18、3 864-884 885- 9 07 9 08 - 93 O 93 1-955 956-981 982- 1008 1009- 1 O36 1037-1 O66 1067- 1098 1 099- 1 13 1 1132-1166 1167-1204 12 05- 1243 1244-1285 1286-1330 1331 - 1378 1379- 1429 143 O- 1483 1484- 1542 1543- 1605 1606-1673 1674- 1747 1748-1827 1828- T914 Sample S ize 230 23 1 232 233 234 235 236

19、237 238 239 240 241 242 2 43 244 245 2 46 247 248 249 250 251 252 2 53 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 Licensed by Information Handling ServicesUIL-C-4BOL 11 W 777770b 0335455 T =- MIL-C-48018(MU) Table I (cont) Major Characterist ics for W

20、ar Reserve I tems Samp 1 e Samp 1 e Sample Lot Size Size Lot Size Size Lot Size Size Lot Size Y- -1_1- - - - - -_I_ 13 1 118 239-241 171 489-496 224 1915-2010 132-133 119 242-243 172 497-504 225 201 1-21 15 135-136 121 247-249 174 514-521 227 2233-2361 137 122 250-252 175 522-530 228 over 2361 138-1

21、39 123 253-255 176 531-540 229 134 120 244-246 173 505-513 226 2116-2232 Sample S ize 277 278 279 280 298 - -_ 6 Licensed by Information Handling Services7 Licensed by Information Handling Services- MIL-C-48038 33 9777706 0335457 3 Licensed by Information Handling ServicesLicensed by Information Han

22、dling ServicesMIL-C-48018 13 m 9997906 0335459 7 MIL-C-48018( MU) Ca teqor i es Character ist ics - _-CI Method of inspection 117. Diameter of bottom counterbores with 118. Concentricity of bottom counterbores 119. No tear, spl it or crack . .Visita1 120. Flash removed ,.Visual/Manua, 121. Material

23、(see 3.1) . Visual small holes . T.M.C. (see 3.3) with small holes T.M.C. (see 3.3) Minor: 201. Workmanship (see 3.4). .Visual/Man.ual 4.3.2.1.5 Connector body assembly (see 9220316 CI_ covering -I_- a detail of dwg. 9221103). Character ist ics Method of inspection -_I- Cateqor ies Critical: None de

24、fined. Major: 101. Al 1 parts present Visual 103. Material (insulation tubing)(see 3.1)Vsual 102. Correct assembly . Visual Minor: 201. Marking, present, complete, correct, and identifiable.Visual 202. Workmanship (see 3.4) Visual 4.3.2.1.6 Pin, guide connector (see dwg. 92203 17 covering a. detail

25、of dwg. 9221103). Catesor es Character ist ics Method of inspection Cri t i ca 1 : None defined, -_I_. - 10 Licensed by Information Handling ServicesCateqor i es Major: 101. 102. 103. 1.04, iCl-5. 106, 107. 108. 109. Minor: 201 6 202. 203* Character i s t i= -_I- Method of inspection Left diameter G

26、age Length #Gage Length of thread (incl, relief) Gage Length of right diameter . Gage Right diameter,.,. . Gage Pitch diameter of thread,. . Gage Major diameter of thread, max,. Gage Thread relief present Visual Material (see 3.1) . Visual Radius present . Visual Surface finish .Visual Workmanship (

27、see 3.4). . Yisual/Manual 4.3.2.1.7 Screw, connector (see dwg. 922031 0- 1 covering a detail of dwg. 9221103). - Categories Critical: Major: 101, 102, 103. 104. 105. 106, 107. 108. 1 Q9. 110. llT. 112. Character ist ics Method of inspection None defined. Pitch diameter of thread . Gage Major diamete

28、r of thread, min . .Gage Thread clearance, max Gage Pilot diameter. Gage shoulder .Gage Total length . Ga ge Length of head . Gage Width of slot Gage Depth of slot Gage Pi lot shoulder clearance present .Visual Diameter of head, Gage Material (see 3, 1) ,.,.,Visual Distance from left face to left 11

29、 Licensed by Information Handling ServicesMIL-C-qOL 1L 777770b 03L59bL 5 - Categories Minor: Character ist i cs Method of inspection 201. Location of screw slot . Gage 202. Chamfer present Visual 203. Surface finish . Visual 204. Workmanship (see 3.4). . Visual/Manual 4.3.2.1.8 Cqnnector, electrical

30、 (see dwg. 9221103). Cat eq o r i es - C ha racte r i s t i cs - Method of inspection Critical: None defined. - Major: 101. Distance from top of pins to bottom 102. Al 1 parts present and properly assembled. Visual side of connector body assy . Gage Minor: 201. Workmanship (see 3.4). . Visual/Manual

31、 4.3.2.1.9 Baq, Packing, for Repair Parts (see dwg. 8883535 covering dwq. part number 8883535-2 and 5.2). - Cateqor iez Characteristics - Method of inspection Critical: None defined. Major: 101. Material (see 3. i) . Visual 103. Width before packing, min., . .MeasureJc 102. Length before packing, mi

32、n . Measure* 104. Objective evidence (see 6.2) for heat seal test in accordance with MIL-P-116 Visual 105. Properly packed. . Visual 106. No tear, spl it, or crack in bag,. Visual *Measure with suitable scale. Minor: 201. Marking. . Visual 202. Workmanship (see 3.4). . Visual/Manual 12 Licensed by I

33、nformation Handling ServicesLicensed by Information Handling ServicesLicensed by Information Handling ServicesMIL-C-48018 33 W 777770b 03354611 O - a. Title, number, and date of this specification. b. Production or Repair Parts. c. Selection of applicable level of packaging and packing required (see

34、 5.1 and 5.2). d. Part used for War Reserve, Training or Test Proiectile. 6.1.2 Contract data requirements. (see 4.3.4.1 . - -1_- Data specified in 4.3.4.1 will be delivered as identified on a numbered DD Form 1664 or specification when specified on a DD Form 1423 incorporated in the contract. contr

35、ol and inspections which can be verified. The contractor shall obtain approval from the Commanding Officer, Picatinny Arsenal, Dover, New Jersey 07801, 6.2 Object ive evidence. Records of contractor quality 6.3 Acceptance inspection equipment (.see 4.3.3.1). ATTN: SMUPA-QA- I Cus tod an : Army - MU Preparing activity: Army - MU Project No. 11 1 O-A 029 *U. S GOVERNMENT PRINTIN WFICG 1972 -714909/259 (i Licensed by Information Handling Services