1、MIL-D-10775F 67 7777706 0376820 LI - _ cj - distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-D-10795F SPECIFICATIONS FEDERAL GG-D-236 GG-P-455 QQ-S-7 8 1 PPP-B-601 PPP-B-636 MILITARY MIL-C- 104 MIL-P- 1 16 MIL-V-173 MIL-
2、P-5 14 MIL-T-704 MIL-B-13207 MIL-B-13207/3 MIL-B-26195 STANDARDS FEDERAL FED- STD-H28 MILITARY MIL-STD-105 MIL-STD-129 MIL-STD-130 MIL-STD-281 MIL-STD-454 MIL- STD-889 MIL-STD-1186 MIL-STD-1472 - Depth Perception Apparatus, Ophthalmological. - Plates and Foils, Photographic (Photosentive - Strapping
3、, Steel, and Seals. - Boxes, Wood, Cleated-Plywood. - Boxes, Shipping, Fiberboard. Anodized Aluminum). - Crates, Wood; Lumber and Plywood Sheathed, - Preservation, Methods of. - Varnish, Moisture- and-Fungus-Resistant Nailed and Bolted. (For Treatment of Communications, Electronic, and Associated Eq
4、uipment). Marking, Blank. - Plates, Identification, Instruction and - Treatment and Painting of Materiel. - Body, Van; Vehicle-Mounted, General Speci- - Body Van; Vehicle-Mounted, IS0 Size 30. - Box, Wood-Cleated, Skid. fication for. - Screw Thread Standards for Federal Services, - Sampling Procedur
5、es and Tables for Inspection - Marking for Shipment and Storage. - Identification Marking for US Military - Automobiles, Trucks, Truck-Tractors, Trailers by Attributes. Property. and Trailer Dollies; Preservation and Packaging of. Equipment. - Standard General Requirements for Electronic - Dissimila
6、r Metals. - Cushioning, Anchoring, Bracing, Blocking and - Human Engineering Design Criteria for Waterproofing; with Appropriate Test Methods. Military Systems, Equipment and Facilities. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-D.- 10 7
7、9 5F (Copies of specifications and standards required by contractors in connection with specific acquisition functions should be obtained from the contracting activity or as directed by the contracting officer.) 2.2 Other publications. The following document(s) form a part of this specification to t
8、he extent specified herein. Unless otherwise specified, the issues of the documents which are DOD adopted shall be those listed in the issue of the DoDISS specified in the solicitation. issues of documents not listed in the DoDISS shall be the issue of the non-Government documents which is current o
9、n the date of the solicitation. Unless otherwise specified, the AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI) C73.11 - Dimensions of Plugs and Receptacles-General Purposes, 125 Volts, 235.1 - Accident Prevention Tags, Specification for. 15 Amperes, 2 Pole, 3 Wire Grounding Type. (Application for copi
10、es should be addressed to the American National Standards Institute, 1430 Broadway, New York, NY 10018.) AMERICAN TRUCKING ASSOCIATION, INC. (ATA) The Maintenance Council - ATA Recommended Maintenance Practices Manual. (Application for copies should be addressed to the American Trucking Association,
11、 Inc., The Maintenance Council - ATA, 2200 Mill Road, Alexandria, VA 22314. ) SOUTH COAST AIR QUALITY MANAGEMENT DISTRICT - RULES and REGULATIONS Rule 442 - Usage of Solvents. (Application for copies should be addressed to the South Coast Air Quality Management District, 9150 E. Flair Drive, El Mont
12、e, CA. 91731.) INDUSTRIAL FASTEmRS INSTITUTE (IFI) IF1 Standards. (Applications for copies should be addressed to the Industrial Fasteners Institute, 1717 East 9th Street, Cleveland, OH 44114.) NATIONAL ASSOCIATION OF NAMEPLATE MANUFACTURERS, INC. (NAME) Nameplate Industry Standards and Practices. (
13、Application for copies should be addressed to the National Association of Nameplate Manufacturers, Inc. 1700 East Dyer Road, Suite 165, Santa Ana, CA 92705. ) 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- _ MIL-D-10775F b7 777770b 037b23 T H MIL
14、-D-10795F NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) NFPA No. 70 - National Electrical Code. (Application for copies should be addressed to the National Fire Protection Association, 470 Atlantic Avenue, Boston, MA 02110.) SOCIETY OF AUTOMOTIVE ENGINEERS (SAE) 5370 - Bolt and Capscrew Sizes for use
15、in Construction and Industrial 5925 - Minimum Access Dimensions for Construction and Industrial Machinery. Machinery. (Application for copies should be addressed to the Society of Automotive Engineers, 400 Commonwealth Drive, Warrendale, PA 15096,) (Non-Government standards and other publications ar
16、e normally available from the organizations which prepare or which distribute the documents. documents also may be available in or through libraries or other informational services These 2.3 Order of precedence. In the event of a conflict between the text of this specification and the references cit
17、ed herein, the text of this specification shall take precedence. applicable laws and regulations unless a specific exemption has been obtained. Nothing in this specification, however, shall supersede 3. REQUIREMENTS 3.1 Description. The portable and simulator testing and training devices (hereinafte
18、r called “devices“) shall consist of electromechanical units for testing and training drivers of government vehicles. The type P device (see 3.10) is a portable unit used to test personnel who possess a valid civilian drivers license and are required to operate military vehicles. device (see 3.11) i
19、s a simulator capable of in-depth testing of personnel, who may or may not possess a valid civilian driverss license, in the operation of the type of vehicle(s) required in the performance of their duties. device screw-threads shall be in accordance with FED-STD-HZ8. The type S Training 3.2 First ar
20、ticle. Unless otherwise specified (see 6.21, a sample shall be subjected to first article inspection (see 4.3 and 6.3). deviations of devices from the approved first article during production will be subject to the approval of the contracting officer. article will not relieve the contractor of his o
21、bligation to furnish devices conforming to this specification. Any changes or Approval of the first 3.3 Material. Material shall be as specified herein. Materials not specified shall be selected by the contractor and shall be subject to all provisions of this specification. 4 P Provided by IHSNot fo
22、r ResaleNo reproduction or networking permitted without license from IHS-,-,-l i MIL-D-LO795F 67 m 9777706 0376824 1 m -_= MIL-D-10795F 3.3.1 Material deterioration prevention and control. The device shall be fabricated from compatible materials, inherently corrosion resistant or treated to provide
23、protection against the various forms of corrosion and deterioration that may be encountered in any of the applicable operating and storage environments to which the device may be exposed. 3.3.2 Dissimilar metals. Dissimilar metals shall not be used in intimate contact with each other unless protecte
24、d against galvanic corrosion. metals and methods of protection are defined and detailed in MIL-STD-889. Dissimilar 3.3.3 Identification of materials and finishes. The contractor shall identify the specific material, material finish or treatment for use with. component and subcomponent, and shall mak
25、e information available upon request to the contracting officer or designated representative. 3.3.4 Recovered materials. For the purpose of this requirement, recovered materials are those materials which have been collected from solid waste and reprocessed to become a source of raw materials, as dis
26、tinguished from virgin raw materials. The components, pieces and parts incorporated in the device may be newly fabricated from recovered materials to the maximum extent practicable, provided the device produced meets all other requirements of this specifi- cation. Used, rebuilt or remanufactured com
27、ponents, pieces and parts shall not be incorporated in the device. 3.4 Human factors engineering. The device shall conform to the human factors engineering design criteria as described in MIL-STD-1472, emphasis shall be given, but not limited to, general requirements (4), controll display integratio
28、n (5.11, visual displays (5.21, audio displays (5.3), controls (5.41, labeling (5.5), anthropometry (5.61, ground workspace design requirements (5.71, environment (5.81, design for maintainability (5.9), hazards and safety (5.13) Special design and personnel-computer interface (5.13) of MIL-STD-1472
29、, as applicable. 3.5 Safety. The devices shall be constructed so as to result in material and components having a correct safety factor, including elimination of nonfunctional sharp edges, protruding points, and excessive lengths of fasteners. Electrical equipment shall be in accordance with the Nat
30、ional Electrical Code and shall be effectively grounded to protect all persons and objects from electrical shock hazards. 3.6 Ease of maintenance. Components of the device shall be accessible for servicing, repair, and replacement. The adjustment and replacement of components shall be accomplished w
31、ith minimum disturbance to adjacent components. Ease of maintenance provisions shall incorporate features insuring operating clearances in accordance with SAE 5925, and facilitating maintenance and service operations. Threaded parts shall be in accordance with SAE 5370 and IF1 Standards. 3.7 Fungus
32、and moisture resistance. The electrical circuitry, including all components and connections, except as specified below, shall be protected from the effects of fungus growth and moisture by an overall treatment with a varnish conforming to MIL-V-173, composition I or II, as applicable (see 3.7.1), wi
33、th 1 percent copper 8-quinolinolate (by weight), based on the nonvolatile content of the varnish. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-D-10775F 67 777770b 037b25 3 W MIL-D-10795F a. b. Components or circuit elements that are inherent
34、ly fungus and moisture resistant or which are hermetically sealed need not be treated. Components or circuit elements whose functions will be adversely affected by the varnish coating shall not be treated. When used, the varnish shall be applied by spray, brush, or a combination of both to give a dr
35、y-film thickness of not less than 1 mil to component or element surfaces previously cleaned and prepared so that the surfaces are free from all foreign matter which would interfere with the adherence or function of the varnish. 3.7.1 Composition. Composition II shall be used only in the case when lo
36、cal air pollution regulations governing the application of varnish precludes the use of composition I. evidence to the Government that the use of composition II is required, and shall certify that the composition II material use complies with Rule 442 South Coast Air Quality Management District. Dat
37、a plates shall be furnished and secured to each end item When composition II is used, the contractor shall provide 3.8 Data plates. with metal fasteners in accordance with NAME Standards and Practices. 3.8.1 Identification. Identification shall be in accordance with MIL-STD-130 on plates conforming
38、to GG-P-455 and MIL-P-514, type I, style 1, of composition C, type A, class 1 material. 3.8.2 Instruction. Each major component of the device shall be equipped with instruction plates detailing applicable (special) operational, safety, and service procedure to be followed, The safety, warning, cauti
39、on, and notice plates shall be in accordance with ANSI 235.1 and shall be compatible with the space available. 3.8.3 Wiring diagram. Plates depicting wiring diagrams shall be furnished on The wiring diagram plate furnished with the type P device shall be Each major component of the type S device sha
40、ll be equipped each device, mounted on the inside of the cabinet in a location that is visible during main- tenance operations. with a simple interface wiring diagram plate, enabling personnel to trace the major interconnecting circuits. 3.9 Interchangeability, All components having the same part nu
41、mber shall be Interchangeable components are functionally and dimensionally interchangeable. defined as two or more like components possessing such functional and physical characteristics as to be equivalent in performance and durability, and capable of being exchanged one or the other without alter
42、ation of the components them- selves or of adjoining components, except for adjustment, and without selection for fit or performance. 3.10 Type P device. 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-D-10795F 3.10.1 Design. The type P testing
43、 device shall be a portable self-contained unit consisting of the components specified herein for testing of drivers visual acuity, field of vision, foot reaction, color perception, and depth perception. Typical components and arrangements thereof are shown in figure 1. O 3.10.2 Components. 3.10.2.1
44、 Cabinet. The cabinet shall be wood, metal, or reinforced plastic, as specified (see 6.2). The cabinet shall be not more than 24 inches high, 24 inches long, and 18 inches wide. type, heavy-duty, carrying handle on top and 4-each wear-resistant feet on the bottom. doors and openings are closed. the
45、cabinet shall be used to prevent component movement. openings shall be equipped with tension-type hook latches not less than 2 inches long, with strikers and piano-type hinges. cabinet shall be weatherproof from rain and dust. an imposed load of a least 200 pounds on any one square foot of cabinet a
46、rea, at any one time, without damage or permanent deformation. The cabinet shall be equipped with a luggage- All components shall be housed and secured within the cabinet when the Clamps, clips, and elastomer foam integral with Access doors and When closed for transport the The cabinet shall withsta
47、nd 3.10.2.2 Visual acuity charts. Unless an optional device is specified (see 6.2 and 6.71, two Snellen charts with a variation in symbol sequence, a variation of the international road signs, and a light source shall be provided. The light shall provide uniform illumination of the charts and shall
48、be not less than 10-foot-candle power. A rack to hold the charts for viewing and a pocket for storage of the charts when not in use shall be provided. 3.10.2.3 Field of vision device. The device for testing an examinees field of vision shall be metal, wood, or reinforced plastic with the scales of d
49、egrees marked on corrosion-resistant metal. of the lateral range of vision between 40 and 100 degrees on each side of the focus line in units of not more than 5 degrees. shall be manual providing selection by the examiner or the examinee of either or both targets. extend to not more than 1 inch above the surface of the base. The targets shall be spring loaded to provide for return of the target upon release of the control to a position not l
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1