ARMY MIL-DTL-11484 1 E-2013 LAPEL BUTTON DISTINGUISHED SERVICE CROSS U S ARMY.pdf

1、 AMSC N/A Page 1 of 2 FSC 8455 INCH - POUND MIL-DTL-11484/1E 8 February 2013 SUPERSEDING MIL-DTL- 11484/1D 27 September 1996 DETAIL SPECIFICATION SHEET LAPEL BUTTON, DISTINGUISHED SERVICE CROSS, U.S. ARMY This specification is approved for use by all Departments and Agencies of the Department of Def

2、ense The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-11484. MATERIAL: Red Brass 85/15 (UNS Alloy No. C-230) FINISH: Epoxy Resin (Stoning epoxy), 24K Gold Plated, Mirror-like Polished and shall match The Institute o

3、f Heraldry Metal Finish Chip Number 6. DIMENSIONS: HEIGHT (Overall): 9/64 inch (REF) WIDTH (Overall): 21/32 inch (REF) THICKNESS (At Edge): 0.065 inch + 0.005 inch Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/1E Page 2 of 2 EPOXY: Ep

4、oxy resin shall be applied to the lapel button as indicated above, and shall match TIOH Hard Enamel Color Chip Numbers listed below TIOH HARD ENAMEL COLOR CHIPS COLOR CHIP NUMBER Red #1 Blue #18 White #28 ATTACHING DEVICE: 1. The attaching device shall be a prong with pick and wing type clutch. 2. T

5、he prong shall be centered on the reverse side and either fused or hard soldered to the lapel button. NOTES: 1. The term (REF) refers to the measurements taken from the obverse Government furnished hub or die. 2. Hard enamel may be used in lieu of epoxy resin at the option of the manufacturer, if ha

6、rd enamel is used the material shall be Gilding Metal 95/5 (UNS alloy C-210). CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodian: Preparing activity: Army - IH Army - IH Revi

7、ew activity: (Project No. 8455-2013-074) DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-