ARMY MIL-DTL-11484 289 B-2013 LAPEL BUTTON PUBLIC SAFETY OFFICER鈥橲 MEDAL OF VALOR U S DEPARTMENT OF JUSTICE.pdf

1、 AMSC N/A Page 1 of 2 FSC 8455 INCH - POUND MIL-DTL-11484/289B 5 December 2013 SUPERSEDING MIL-DTL-11484/289A 30 June 2007 DETAIL SPECIFICATION SHEET LAPEL BUTTON, PUBLIC SAFETY OFFICERS MEDAL OF VALOR, U.S. DEPARTMENT OF JUSTICE This specification is approved for use by all Departments and Agencies

2、 of the Department of Defense The requirements for acquiring the product described herein must consist of this specification sheet and the latest issue of MIL-DTL-11484. MATERIAL: Red Brass 85/15 (UNS Alloy Number C-230) DIMENSIONS: HEIGHT: 23/32 inch (REF) WIDTH: 11/16 inch (REF) THICKNESS (at end

3、of star arm): 0.075 inch 0.010 inch FINISH: 24K Gold Plated, Matte Finish, Polished Highlights and must match The Institute of Heraldry (TIOH) Metal Finish Chip Number 8. EPOXY: Epoxy enamel shall be applied as indicated below, and must match TIOH Hard Enamel Color Chip Number listed: TIOH HARD ENAM

4、EL COLOR CHIP NUMBER LOCATION Blue #20 Arms of star Hard cloisonn enamel may be used in lieu of epoxy. If hard cloisonn enamel is used, the required base material is Gilding Metal 95/5 (UNS Alloy Number C-210). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from

5、 IHS-,-,-MIL-DTL-11484/289B Page 2 of 2 ATTACHING DEVICE: The attaching device will be a prong with pick and wing type clutch. The prong will be centered on the reverse side and either fused or hard soldered to the lapel button. NOTES: 1. The term (REF) refers to measurements taken from the Governme

6、nt furnished hub or die. 2. The manufacturer may deviate from MIL-DTL-11484 by using nickel underplating prior to plating with 24K gold. 3. This item is not authorized for commercial sale, and may be produced only under Government contract and at the request of the U.S. Department of Justice. Custod

7、ian: Preparing activity: Army - IH Army - IH Civil agency: (Project No. 8455-2014-003) DOJ - BJA NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-