1、 INCH-POUNDMIL-DTL-11484/298A 30 December 2007SUPERSEDING MIL-DTL-11484/298 4 March 2003 DETAIL SPECIFICATION SHEET LAPEL BUTTON, AIR AND SPACE CAMPAIGN MEDAL, AIR FORCE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquirin
2、g the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-11484. MATERIAL: Red Brass FINISH: Oxidized, Buffed Relieved and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 4. DIMENSIONS: HEIGHT: 9/64 inch (REF) WIDTH: 21/32 inch (RE
3、F) THICKNESS (at thickest point): 0.065 0.005 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. Attaching device shall be prong with pick and flat ball type clutch. The prong shall be centered on the reverse side and fused or soldered to the
4、lapel button. AMSC N/A Page 1 of 2 FSC 8455 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/298A 3. Enameled/epoxied areas shall be as shown. Epoxy resin (stoning epoxy) may be at the option of the manufacturer. When hard enamel is used
5、, the material requirement shall be gilding metal. When epoxy is used, the material requirement shall be either red brass or gilding material. Colors shall conform to TIOH Hard Enamel Color Chip Numbers listed below: CHIP COLOR 1 RED 18 BLUE 28 WHITE 34 BLUE CHANGES FROM PREVIOUS ISSUE: Marginal not
6、ations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodian: Preparing activity: Army - IH Army - IH (Project No. 8455-2008-089) Review activities: DLA - CT NOTE: The activities listed above were interested in this document
7、as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Page 2 of 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1