ARMY MIL-DTL-11484 335-2013 LAPEL BUTTON NATIONAL INTELLIGENCE SUPERIOR SERVICE DIRECTOR OF NATIONAL INTELLIGENCE.pdf

1、AMSC N/A 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET LAPEL BUTTON, NATIONAL INTELLIGENCE SUPERIOR SERVICE DIRECTOR OF NATIONAL INTELLIGENCE This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for acquiring the product described herein s

2、hall consist of this specification sheet, the latest issue of MIL-DTL-11484, and a request from the Office of the Director of National Intelligence. MATERIAL: Red Brass 85/15 (UNS Alloy C-230) FINISH: Silver Plated, Oxidized, Buffed Relieved, Matte Finish, Polished Highlights and shall match The Ins

3、titute of Heraldry Metal Finish Chip number 15. DIMENSIONS: HEIGHT: 5/8 inch (REF) WIDTH: 5/8 inch (REF) THICKNESS: 0.060 0.010 inch ATTACHING DEVICE: 1. Attaching device shall be prong with pick and flat ball clutch. 2. The prong shall be centered on the reverse side and fused or soldered to the la

4、pel button. INCH-POUND MIL-DTL-11484/335 08 July 2013 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/335 2 of 2 NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. This item is not aut

5、horized for commercial sale, and may be produced only under Government contract and at the request of the Office of the Director of National Intelligence. Custodian: Preparing activity: Army - IH Army - IH Review Activity: (Project No. 8455-2013-165) DLA - CT Civil Agency: ODNI - NIAP NOTE: The acti

6、vities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-