ARMY MIL-DTL-11484 340 E NOTICE 2-2012 LAPEL BUTTON STATE AND LOCAL LAW ENFORCEMENT CONGRESSIONAL BADGE OF BRAVERY U S DEPARTMENT OF JUSTICE.pdf

1、 AMSC N/A Page 1 of 3 FSC 8455 INCH - POUND MIL-DTL-11484/340 9 May 2012 DETAIL SPECIFICATION SHEET LAPEL BUTTON, STATE AND LOCAL LAW ENFORCEMENT, CONGRESSIONAL BADGE OF BRAVERY, U.S. DEPARTMENT OF JUSTICE This specification is approved for use by all Departments and Agencies of the Department of De

2、fense. The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-11484. MATERIAL: Red Brass 85/15 (UNS Alloy No. C-230) DIMENSIONS: HEIGHT: 11/16 inch (REF) WIDTH: 11/16 inch (REF) THICKNESS (across top arm of cross where st

3、ar band overlaps): 0.070 inch 0.010 inch Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/340 Page 2 of 3 PIERCINGS: Piercings shall be as indicated above. FINISH: NICKEL: Borders of cross and star band and stars within star band shall b

4、e Nickel Plated, Matte Finish, Polished Highlights, and shall match TIOH Metal Finish Chip #18. GOLD: Central badge and all elements of the Congressional Seal on it shall be 24K Gold Plated, Matte Finish, Polished Highlights, and shall match TIOH Metal Finish Chip Number 8. EPOXY: Epoxy enamel shall

5、 be applied as indicated below, and shall match TIOH Hard Enamel Color Chip Numbers listed: TIOH HARD ENAMEL COLOR CHIP NUMBER LOCATION Blue #20 Star Band White #28 Arms of Cross ATTACHING DEVICE: The attaching device shall be a prong with pick and wing type clutch. The prong shall be centered on th

6、e reverse side and either fused or hard soldered to the lapel button. NOTES: 1. The term (REF) refers to the measurements taken from the obverse Government furnished hub or die. 2. The manufacturer may deviate from MIL-DTL-3943 by using nickel underplating prior to plating with 24K gold. 3. Hard clo

7、isonn enamel may be used in lieu of epoxy. If hard cloisonn enamel is used, the required base material is Gilding Metal 95/5 (UNS Alloy C-210). 4. This item is not authorized for commercial sale, and may be produced only under Government contract and at the request of the U.S. Department of Justice.

8、 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/340 Page 3 of 3 Custodian: Preparing activity: Army - IH Army - IH Civil agency: (Project No. 8455-2012-027) DOJ - BJA NOTE: The activities listed above were interested in this document a

9、s of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Figure 1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-