ARMY MIL-DTL-11484 341-2012 LAPEL BUTTON FEDERAL LAW ENFORCEMENT CONGRESSIONAL BADGE OF BRAVERY U S DEPARTMENT OF JUSTICE.pdf

1、 AMSC N/A Page 1 of 2 FSC 8455 INCH - POUND MIL-DTL-11484/341 9 May 2012 DETAIL SPECIFICATION SHEET LAPEL BUTTON, FEDERAL LAW ENFORCEMENT, CONGRESSIONAL BADGE OF BRAVERY, U.S. DEPARTMENT OF JUSTICE This specification is approved for use by all Departments and Agencies of the Department of Defense. T

2、he requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-11484. MATERIAL: Red Brass 85/15 (UNS Alloy No. C-230) DIMENSIONS: HEIGHT: 11/16 inch (REF) WIDTH: 11/16 inch (REF) THICKNESS (across designation band): 0.093 inch 0.0

3、10 inch Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/341 Page 2 of 2 FINISH: NICKEL: Center disc, outer scalloped area, and lettering and objects within designation band shall be Nickel Plated, Matte Finish, and shall match The Insti

4、tute of Heraldry TIOH) Metal Finish Chip Number 17. GOLD: Borders of designation band, and the Congressional Seal (including stars) on center disc shall be Gold Plated, Matte Finish, Polished Highlights, and shall match TIOH Metal Finish Chip Number 8. EPOXY: Hard epoxy enamel shall be applied as in

5、dicated below, and shall match TIOH Hard Enamel Color Chip Number listed: TIOH HARD ENAMEL COLOR CHIP NUMBER LOCATION Blue #20 Designation Band ATTACHING DEVICE: The attaching device shall be a prong with pick and wing type clutch. The prong shall be centered on the reverse side and either fused or

6、hard soldered to the lapel button. NOTES: 1. The term (REF) refers to the measurements taken from the obverse Government furnished hub or die. 2. The manufacturer may deviate from MIL-DTL-3943 by using nickel underplating prior to plating with 24K gold. 3. Hard cloisonn enamel may be used in lieu of

7、 epoxy. If hard cloisonn enamel is used, the required base material is Gilding Metal 95/5 (UNS Alloy C-210). 4. This item is not authorized for commercial sale, and may be produced only under Government contract and at the request of the U.S. Department of Justice. Custodian: Preparing activity: Arm

8、y - IH Army IH Civil agency: (Project No. 8455-2012-028) DOJ BJA NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Figure 1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-