ARMY MIL-DTL-11484 346-2012 LAPEL BUTTON EXCEPTIONAL PUBLIC ACHIEVEMENT MEDAL NASA.pdf

1、AMSC N/A Page 1 of 2 FSC 8455 INCH - POUND MIL-DTL-11484/346 7 August 2012 DETAIL SPECIFICATION SHEET LAPEL BUTTON, EXCEPTIONAL PUBLIC ACHIEVEMENT MEDAL, NASA This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the produ

2、ct described herein shall consist of this specification sheet and the latest issue of MIL-DTL-11484. MATERIAL: Red Brass 85/15 (UNS Alloy No. C-230) DIMENSIONS: DIAMETER: 9/16 inch THICKNESS (across scroll): 0.075 inch 0.010 inch FINISH: 24K Gold Plated, Matte Finish, Polished Highlights, and shall

3、match The Institute of Heraldry (TIOH) Metal Finish Chip Number 8. ATTACHING DEVICE: The attaching device shall be prong with pick and wing type clutch. The prong shall be centered on the reverse side and either fused or soldered to the lapel button. Provided by IHSNot for ResaleNo reproduction or n

4、etworking permitted without license from IHS-,-,-MIL-DTL-11484/346 Page 2 of 2 NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. The manufacturer may deviate from MIL-DTL-11484 by using nickel underplating prior to plating with 24K gold. 3. This i

5、tem is not authorized for commercial sale, and may be produced only under Government contract and at the request of the National Aeronautics and Space Administration. Custodian: Preparing activity: Army - IH Army - IH (Project No. 8455-2012-116) NOTE: The activities listed above were interested in t

6、his document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-