ARMY MIL-DTL-15665 109-2012 INSIGNIA COLLAR ENLISTED ELECTRONIC WARFARE U S ARMY.pdf

1、AMSC N/A Page 1 of 3 FSC 8455 DETAIL SPECIFICATION SHEET INSIGNIA, COLLAR, ENLISTED, ELECTRONIC WARFARE, U.S. ARMY This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this sp

2、ecification sheet and the latest issue of MIL-DTL-15665. BASE (DISC) DEVICE ASSEMBLED DASH NUMBERS: -1 Enlisted Insignia, Base (Disc) -2 Enlisted Insignia, Device -3 Enlisted Insignia, Assembled MATERIAL (-1 and -2): Red Brass 85/15 (UNS Alloy No. C-23000) FINISH (-1 and -2): 22K Gold Plated, Mirror

3、-like Polished, and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 9. INCH-POUND MIL-DTL- 15665/109 15 May 2012 #26 #26 #26 #26 #31 #31 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-15665/109 Page 2 of 3 EPOXY (-2): E

4、poxy enamel shall be applied as indicated above and as specified in the table below, and shall match the TIOH Hard Enamel Color Chip Number listed. Hard cloisonn enamel may be used in lieu of epoxy enamel. If hard Cloisonn enamel is used, the required base material for -2 shall be Gilding Metal 95/5

5、 (UNS Alloy C-210): TIOH HARD ENAMEL COLOR CHIP NUMBER ITEM LOCATION BLACK #26 -2 Central panel of shield, to include interior circle at top of key and interior nook at bottom of key YELLOW #31 -2 Left and right panels of shield ASSEMBLY AND ATTACHING DEVICES: -1 shall be manufactured and -3 assembl

6、ed in accordance with TIOH Manufacturing Drawing Number 4-4-89. The use of a Type A or a Type C disc is at the manufacturers discretion. DIMENSIONS: DIAMETER: -1, -3: 1 inch + 1/64 inch - 0 HEIGHT: -2: 7/8 inch (REF) THICKNESS: -1: 0.040 inch 0.005 inch -2 (across top of shield): 0.070 0.005 inch -3

7、 (across top of shield): 0.110 0.010 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. At the manufacturers discretion, and for commercial sale only, -1 and -2 may be finished as follows: 24K Gold Plated, Mirror-like Polished, and shall match

8、 TIOH Metal Finish Chip Number 6. 3. When a manufacturer elects to finish -1 and -2 according to the provision made in NOTE 2, the manufacturer may deviate from MIL-DTL-15665 by using nickel undercoating prior to applying the requisite 24K gold plating. Provided by IHSNot for ResaleNo reproduction o

9、r networking permitted without license from IHS-,-,-MIL-DTL-15665/109 Page 3 of 3 Custodian: Preparing activity: Army - IH Army - IH Review activity: (Project No. 8455-2012-016) DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-