ARMY MIL-DTL-3628 231 A-2009 BADGE QUALIFICATION BERET SURVIVAL EVASION RESISTANCE AND ESCAPE AIR FORCE《空军生存 逃离、抵抗和逃跑比赛贝雷帽资质徽章》.pdf

1、AMSC N/A Page 1 of 2 FSC 8455 INCH-POUND MIL-DTL-3628/231A 15 November 2009 SUPERSEDING MIL-DTL-3628/231 28 January 2004 DETAIL SPECIFICATION SHEET BADGE, QUALIFICATION, BERET, SURVIVAL, EVASION, RESISTANCE AND ESCAPE, AIR FORCE This specification is approved for use by all Departments and Agencies

2、of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and latest issue of MIL-DTL-3628. MATERIAL: Red Brass FINISH: Nickel Plated, Silver Plated, Oxidized, Relieved, Matte Finished, and shall match The Institute of Heraldr

3、y (TIOH) Metal Finish Chip Number 14. DIMENSIONS: HEIGHT: 1-3/8 inches (REF) WIDTH (at widest point): 1-3/16 inch (REF) THICKNESS (at thickest point): 0.080 0.005 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. Attaching device shall be win

4、g and clutch type. Two prongs shall be located on the reverse on the horizontal center line and approximately 13/16 inch apart. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3628/231A Page 2 of 2 3. As an alternate method of manufacturing f

5、or commercial sale only the badge may be Nickel or Rhodium Plated with a Mirror-like Polished Finish and shall match TIOH Metal Finish Chip Number 16. CHANGES FROM PREVIOUS ISSUE: The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were

6、made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationshi

7、p to the last previous issue. Custodians: Preparing activity: Army - IH Army - IH Air Force - 11 (Project No. 8455-2010-005) Review activities: DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-