1、AMSC N/A 1 of 2 FSC 8455 INCH-POUND MIL-DTL-3628/232B 15 November 2009 SUPERSEDING MIL-DTL-3628/232A 21 December 2004 DETAIL SPECIFICATION SHEET BADGE, QUALIFICATION, AVIATION, AIR WING, COAST GUARD AUXILIARY This specification is approved for use by all Departments and Agencies of the Department of
2、 Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-3628. DASH NO. -1: Regular Size -2: Miniature Size MATERIAL: Red Brass or Nickel Silver FINISH: WINGS AND ANCHOR: Nickel Plated (Red Brass only), Mirror-lik
3、e Polished, and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 16. DISK WITH SHIELD: Enameled or Epoxied, 24K Gold Plated, Mirror-like Polished, and shall match TIOH Metal Finish Chip Number 6. DIMENSIONS: HEIGHT (overall): -1: 11/16 inch (REF) -2: 3/8 inch (REF) WIDTH (overal
4、l): -1: 2-3/16 inch (REF) -2: 1-3/8 inch (REF) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3628/232B 2 of 2 THICKNESS (at thickest point): -1: 0.091 0.010 inch -2: 0.083 0.010 inch NOTES: 1. The term (REF) refers to the measurements taken
5、 from the Government furnished hub or die. 2. Piercing shall be as indicated for the regular size badge only. 3. Area surrounding center gold disk with shield shall be filled with enamel or epoxy conforming in color to TIOH Hard Enamel Chip Number 20. 4. Attaching device shall be prong and wing type
6、 clutch. Two prongs shall be located on the reverse on the horizontal center line. -1: The prongs shall be located equidistant from each end and 1-15/16 inches 1/64 inch apart. -2: The prongs shall be located equidistant from each end and 15/16 inches 1/64 inch apart CHANGES FROM PREVIOUS ISSUE: Mar
7、ginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing activity: Army - IH Army - IH (Project No. 8455-2010-015) Review activities: DLA - CT NOTE: The activities listed above were interested in this
8、 document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1