ARMY MIL-DTL-3628 256-2011 BADGE IDENTIFICATION U S CYBER COMMAND.pdf

1、AMSC N/A FSC 8455 DETAIL SPECIFICATION SHEET BADGE, IDENTIFICATION, U.S. CYBER COMMAND This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and the la

2、test issue of MIL-DTL-3628. DASH NUMBERS: -1 Regular Size -2 Miniature Size MATERIAL (-1 and -2): Red Brass 85/15 (UNS Alloy C-23000) FINISH (-1 and -2): 24K Gold Plated, Matte Finish, Polished Highlights, and shall match The Institute of Heraldry (TIOH) Metal Finish Chip #8. Epoxy shall be applied

3、to the areas and match the TIOH Hard Enamel Color Chip number specified below: COLOR CHIP NUMBER LOCATION(S) Blue 20 (1) Designation Band (2) All Letters and Numerals within Code Ring INCH-POUND MIL-DTL-3628/256 6 July 2011 Provided by IHSNot for ResaleNo reproduction or networking permitted without

4、 license from IHS-,-,-MIL-DTL-3628/256 Page 2 of 2 DIMENSIONS: DIAMETER: -1: 2 inches (REF) -2: 1-1/2 inches (REF) THICKNESS (at eagles breast): -1: 0.113 inch 0.010 inch -2: 0.103 inch 0.010 inch ATTACHING DEVICE: Attaching device for -1 and -2 shall be prong and flat ball clutch type. A three pron

5、g configuration shall be used. -1 shall have its prongs located on a 1-5/8 inches 1/64 inch diameter circle. -2 shall have its prongs located on a 1-1/8 inches 1/64 inch diameter circle. On -1 and -2 the prongs shall be spaced 120 degrees apart with the bottom prong located on the vertical center li

6、ne. NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. Enamel may be used in lieu of epoxy. When enamel is used, the material requirement shall be Gilding Metal 95/5 (UNS Alloy C-21000). Custodians: Preparing activity: Army - IH Army - IH Air Force

7、 - 11 Navy - NU Review activities: (Project No. 8455-2011-008) Navy - MC, CG1 DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-