ARMY MIL-DTL-3628 40 F-2009 BADGE QUALIFICATION MARINE CORPS RIFLE COMPETITION《海军陆战队步枪射击比赛资质徽章》.pdf

1、AMSC N/A Page 1 of 3 FSC 8455 INCH-POUND MIL-DTL-3628/40F 15 August 2009 SUPERSEDING MIL-DTL-3628/40E 15 November 1996 DETAIL SPECIFICATION SHEET BADGE, QUALIFICATION, MARINE CORPS RIFLE COMPETITION This specification is approved for use by all Departments and Agencies of the Department of Defense.

2、The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-3628. DASH NO. -1: Gold -2: Silver -3: Bronze MATERIALS: PENDANT: Gilding Metal SUSPENSION BAR -1, -2: Red Brass -3: Gilding Metal Provided by IHSNot for ResaleNo rep

3、roduction or networking permitted without license from IHS-,-,-MIL-DTL-3628/40F Page 2 of 3 FINISH: PENDANT: -1: Hard Enameled, Gold Plated, Matte Finish, Lightly Polished Highlights and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 8. REVERSE - Gold Plated, Mirror-like Polis

4、hed and shall match TIOH Metal Finish Chip Number 6. -2: Hard Enameled, Silver Plated, Oxidized, Relieved, Lightly Polished Highlights and shall match TIOH Metal Finish Chip Number 15. REVERSE - Silver Plated, Mirror-like Polished. -3: Hard Enameled, Oxidized, Highlights Polished. REVERSE - Mirror-l

5、ike Polished. SUSPENSION BAR: -1: Gold Plated, Matte Finish, Polished Highlights and shall match TIOH Metal Finish Chip Number 8. REVERSE - Gold Plated, Mirror-like Polished and shall match TIOH Metal Finish Chip Number 6. -2: Silver Plated, Matte Finish, Polished Highlights and shall match TIOH Met

6、al Finish Chip Number 13. REVERSE - Silver Plated, Mirror-like Polished. -3: Oxidized, Highlights Polished. REVERSE - Silver Plated, Mirror-like Polished. DIMENSIONS: PENDANT: DIAMETER: 1-9/32 inches (REF) THICKNESS (at rim): 0.085 inch + 0.005 inch SUSPENSION BAR: HEIGHT (overall): 3/8 inch (REF) W

7、IDTH (overall): 1-15/32 inches (REF) THICKNESS (edge): 0.065 inch + 0.005 inch ASSEMBLED HEIGHT (overall): 1-7/8 inches NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. Enameled areas shall be as indicated. The color shall conform to the TIOH chi

8、p numbers listed below or the standard sample. COLOR CHIP NUMBER Black 26 White 28 3. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at the option of manufacturer. Epoxy resin shall be smooth and flush with the dikes. 4. The connecting links shall be fabricated from wire with a nomin

9、al diameter of 0.044 inch, shall be oblong shaped and 3/16 inch + 1/64 inch long by 1/8 inch + 1/64 inch wide. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3628/40F Page 3 of 3 The links shall be manufactured with the same material and fin

10、ish as the pendant and suspension bar. 5. Lugs are integral. 6. The attaching device shall be a prong and flat ball clutch type. Red brass flat ball clutches shall be used for Dash No. -1 and -3. Nickel plated flat ball clutches shall be used for Dash No. -2. The prongs shall be located on the horiz

11、ontal center line of the suspension bar, equidistant from each end and 1-1/16 inches + 1/32 inch apart. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodian: Preparing activity

12、: Army - IH Army - IH Navy MC (Project No. 8455-2009-106) Review activities: DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-