ARMY MIL-DTL-3943 191 A-2010 MEDAL GOOD CONDUCT ARMY《陆军品德优良奖章》.pdf

1、AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET MEDAL, GOOD CONDUCT, ARMY This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and the latest

2、 issue of MIL-DTL-3943. DASH NO. -1: Regular Size -2: Miniature Size MATERIAL: Red Brass FINISH: Brass, Oxidized, Buffed Relieved and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 4. INCH-POUND MIL-DTL-3943/191A 15 March 2010 SUPERSEDING MIL-DTL-3943/191 30 June 1997 OBVERSE

3、REVERSE Provided by IHSNot for Resale-,-,-MIL-DTL-3943/191A Page 2 of 2 DIMENSIONS: DIAMETER: -1: 1-1/4 inches (REF) -2: 5/8 inch (REF) THICKNESS (at thickest point): -1: 0.190 inch + 0.005 inch -2: 0.105 inch + 0.005 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government

4、 furnished hub or die. 2. The ribbon for the pendant drape shall conform to MIL-DTL-11589/68. 3. The lapel button shall conform to MIL-DTL-11484/48. CHANGES FROM PREVIOUS ISSUE: The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were ma

5、de. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship

6、to the last previous issue. Custodians: Preparing activity: Army - IH Army - IH Review activities: (Project No. 8455-2010-134) DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for Resale-,-,-