ARMY MIL-DTL-3943 198 A-2012 MEDAL SPANISH WAR SERVICE.pdf

1、AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET MEDAL, SPANISH WAR SERVICE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and the lates

2、t issue of MIL-DTL-3943. OBVERSE REVERSE MATERIAL: Red Brass 85/15 (UNS Alloy No. C-230) FINISH: Brass, Oxidized, Buffed Relieved and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 4. DIMENSIONS: DIAMETER: 1-1/4 inches (REF) THICKNESS (At rim): 0.085 inch + 0.010 inch INCH-POU

3、ND MIL-DTL-3943/198A 04 October 2012 SUPERSEDING MIL-DTL-3943/198 30 June 1997 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3943/198A Page 2 of 2 PENDANT RING: 1. The pendant ring shall be fabricated from 0.050 inch + 0.002 inch nominal di

4、ameter wire with the same material and finish as the pendant. 2. The ring shall have an outside diameter of 0.200 inch + 0.010 inch. 3. The ring shall be hard soldered to the top center of the pendant. NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die

5、. 2. The specification slash sheet for the ribbon for the pendant drape is MIL-DTL-11589/139. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodian: Preparing activity: Army - I

6、H Army - IH (Project No. 8455-2012-092) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-