1、AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET RIBBON, ATTACHMENT, LETTER “W” This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for acquiring the product described herein shall consist of this specification sheet and the la
2、test issue of MIL-R-41819. MATERIAL: Red Brass 85/15 (UNS Alloy No. C-230) or Nickel Silver 65/15 (UNS Alloy C-752) FINISH: Nickel Plated (C-230 only) Mirror-like Polished and shall match The Institute of Heraldry Metal Finish Chip Number 16. DIMENSIONS: HEIGHT: 1/4 inch + 1/64 inch (REF) WIDTH: 1/4
3、 inch + 1/64 inch (REF) THICKNESS (At thickest point): 0.055 inch + .005 inch ATTACHING DEVICE: 1. The attaching device shall be two single post type prongs. 2. The prongs shall be located on the reverse side of the ribbon attachment at the intersection of each outside leg of the “W“ and the horizon
4、tal center line. INCH-POUND MIL-DTL-41819/14E 25 February 2013 SUPERSEDING MIL-DTL-41819/14D 30 September 1996 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-41819/14E 2 of 2 NOTES: 1. The term (REF) refers to the measurements taken from the
5、 Government furnished hub or die. 2. Ribbon attachment “W“ shall be die cut. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodian: Preparing activity: Army - IH Army - IH Revie
6、w activity: (Project No. 8455-2013-086) DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1