1、 AMSC N/A Page 1 of 2 FSC 8455 INCH - POUND MIL-DTL-41819/49 9 May 2012 DETAIL SPECIFICATION SHEET RIBBON ATTACHMENT, STATE AND LOCAL LAW ENFORCEMENT, CONGRESSIONAL BADGE OF BRAVERY, U.S. DEPARTMENT OF JUSTICE This specification is approved for use by all Departments and Agencies of the Department o
2、f Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-R-41819. MATERIAL: Red Brass 85/15 (UNS Alloy No. C-230) DIMENSIONS: HEIGHT: 11/32 inch (REF) WIDTH: 11/32 inch (REF) THICKNESS (at base of laurel wreath): 0.0
3、53 inch 0.010 inch Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-41819/49 Page 2 of 2 PIERCINGS: Piercings shall be as indicated above. FINISH: Silver Plated, Oxidized, Buffed Relieved, Matte Finish, Polished Highlights, and shall match The
4、 Institute of Heraldry (TIOH) Metal Finish Chip Number 15. ATTACHING DEVICE: Attaching device shall be a staple type prong (see illustration below). The prong shall be located on the horizontal center line and at least 1/16 inch 1/64 inch from either end of the ribbon attachment, and either fused or
5、 hard soldered to the attaching device. The arms of the prong shall be of suitable length for bending across the back of the service ribbon bar to secure the ribbon attachment in place. NOTES: 1. The term (REF) refers to the measurements taken from the obverse Government furnished hub or die. 2. Thi
6、s item is not authorized for commercial sale, and may be produced only under Government contract and at the request of the U.S. Department of Justice. Custodian: Preparing activity: Army - IH Army - IH Civil agency: (Project No. 8455-2012-029) DOJ - BJA NOTE: The activities listed above were interes
7、ted in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Figure 1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1