1、MIL-DTL-45444C (L) E 999990b 2L038b5 179 M MIL-DTL-45444C AMENDMENT 1 17 April 1999 DETAIL SPECIFICATION HMX (CYCLOTETRAMETHYLENETETRANITRAMINE) This amendment forms a part of MIL-DTL-45444C, dated 26 November 1999, and is approved for use by all Departments and Agencies of the Department of Defense
2、. PAGE 2 2.2.1 Delete the following documents: “RR-S-366 MIL-STD-1235 DOD-STD-2101 and substitute the following: “MIL-STD-1916 - DOD Preferred Methods for Acceptance of Product“ 2.2.2 Uniler DRAWINGS add the following: “U.S. ARMY ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER (ARDEC) 13982865
3、 - Minimum Marking Instructions for Ammunition and Explosive Containers“ 2.3 Non-government publications, add the following: “ASTM Ell - Wire-Cloth Sieves for Testing Purposes“ AMSC N/A 1 of 3 FSC 1376 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSN
4、ot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-45444C (L) I 99999Ob 2L038bb 005 MIL-DTL-45444C AMENDMENT 1 PAGE 8 4.4.2 Inspection to be performed, last sentence, delete in its entirety and substitute the following: (See MIL-STD-1916 for definitions of crit
5、ical, major and minor classification of characteristics. 1 4.5.1 Inspection lot formation, delete second sentence from the bottom and substitute the following: “The lot shall be submitted for inspection in accordance with MIL-STD-1916 when applicable.“ 4.5.2a Classification of characteristics, botto
6、m of page, delete last sentence and substitute the following: (See MIL-STD-1916 for definitions of critical, major and minor classification of characteristics.)“ PAGE 10 4.6.1 Sampling, delete the second sentence and substitute the following: “The selection of batches for inspection sampling and tes
7、ting shall be in accordance with MIL-STD-1916 except that in lieu of Table IV (MIL-STD-1916), the following continuous sampling plan shall be used: i=10, f=1/3 and there shall be no reduced or tightened inspection level.“ Sampling, last sentence, delete “MIL-STD-1235“ and substitute “MIL-STD-1916“.
8、PAGE 18 4.7.1.6.1; HPLC method conditions. Delete the 3& sentence, “The mobile phase shall. , and 7.5% by volume of methanol.“, and substitute with the followings: “The mobile phase shall be a quaternary system consisting of the following components and volumetric proportions: 70% of 2,2,4-trimethyl
9、pentane (iso-octane), 20% of chloroform, 7% of acetonitrile and 3% of methanol. In actual 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-45444C AMENDMENT 1 application, the volumetric ratio of solvents can be adjusted slightly to “optimize
10、“ the chromatography of the components of interest (RDX or HMX) .“ PAGE 28 4.7.8 Granulation, second subparagraph, first sentence, delete “ . . . specified &inch U.S. Standard sieves complying with Specification RR-S-366 . . .“, and substitute . .-. specified 8-inch W.S. Standard sieves complying wi
11、th ASTM Ell . . . W *? PAGE 29 4.7.9 Workmanship, Note, delete and substitute the following new note: “(See MIL-STD-1916 for definitions of critical, major and minor classification of characteristics.)“ PAGE 35 6.4.3 Marking, second sentence, delete “Standard MIL-STD-129- 1“ and substitute “Drawing 12982865“. PAGE 36 6.4.6a. Delete “MIL-STD-129-1“ in its entirety. Custodian: Army - AR Navy - OS Air Force - 99 Preparing activity: Army - AR (Project 1376 - 0060) 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1