ARMY MIL-I-51192 B-1979 INSTALLATION KIT ARMORED VEHICLE GAS-PARTICULATE FILTER UNIT M29A1《M29A1 装甲车辆 滤毒通风装置安装套件》.pdf

1、Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- HIL-I-SLL72B 42 M 77777Ob 0234bb7 3 MIL-I-51192B (EA) MILITARY MIL-P-116 - Przservation-Packaging, Methods of MLL-FJ-117 - Bags, Sleeves and Tubing - Interior Packaging. MIL-I3-121 - Barrier Material,

2、Greaseproofed, Waterproofed, Flexible . MIL-E-46506 - Boxes, STANDARDS MILITARY MIL-STD-105 - SEU Ammunition Packing, Wood, ng Procedures and Tables Attribut es iirebound, )r Inspection -y llIL-STD-129 Marking for Shipment and Storage. MIL-STD-2188 - Commercial. Packaging of Supplies and Equipment,

3、DRAWINGS AND TECHNICAL DATA PACKAGE LIST (TDPL) US ARMY NIMAMENT RESEARCH AND DEVELOPMENT COMMAND CHEMICAL SYSTEMS LABRATORY .- TDPL5-lgL30Ej2 = Installation Kit, Armored Vehicle, Gas-Parti- culate Filter Unit, M29Alr (Copies of specifications, standards, drawings, and publications required by contr

4、actors in connection with specific procurement functions should be obtained fromthe procuring activity or as directed by the contracting of- ficer * ) 3. REQUIREMENTS 3.1 Materials and components. 3.1.1 Materials. All materials cited on TDPL5-19-3052 or on the sub- sidiary dradngs shall conform to t

5、he specifications listed thereon, or to the specified characteristics set forth on the drawings. to the specifications and drawings listed on TDPL5-19-3052 and subsidiary drawings . 3.1,2 Components. All components of the installation kit shaU conform 3.2 Manufacture and assembly, A11 components oft

6、he installation kit shall be manufactured and assembled in accordance with their respective assembly drawings listed on TDPL5-19-3052. function properly and have electrical continuity, as applicable, when tested as specified in 4,2,4,1. Electrical components shall 2 Provided by IHSNot for ResaleNo r

7、eproduction or networking permitted without license from IHS-,-,-3.3 Workmanship, All metal parts of the installation kit shall be All parts shall be free from foreign matter such as free from burrs and sharp edges and defects such as bent, broken, or cracked members. dirt, grease, oil, or viscous m

8、aterial; 4. QUALITY ASSURANCE PROVSIONS I 4.1 Resmnsibilify for inspection, 4.1.1 Contractors responsibility, Unless otherwise specified in the contract, the contractor is responsible for the performance of all inspec- tion requirements as specified herein, Except as otherwise specified in the contr

9、act, the contractor may use his own or any other facilities suit- able for the performance of the inspection requirements specified herein, unless disapproved by the Government, to perform any o? tlie inspections sec forth in the specification where such inspections are deemed necessary to assure su

10、pplies and services con- form to specified requirements. 4,1.2 ObJective evidence, The contractor shall provide objective evi- dence acceptable to the contracting officer that the requirements of 3.1 and section 5 for which specific inspection has not been provided in this 9- The Government reserves

11、 the right - specification have been satisfied. . t 4.2 Quality conformance inspection. 4,2,1 Lottin% A lot shall consist of the installation kits produced by one manufacturer, at one plant, fromthe same materials, under essen- tialy the same manufacturing conditions. 4,2.L Sampling for examination,

12、 Sampling shall be conducted in accord- ance with MIL-STD-105. 4.2.3 Inspection procedure. . 4.2.3,l Examination. Sample installation kits shall be examined in accordance with the classification of defects and ML-STD-105r -. -. I.: .:_- .) . . .: . , .-. , , . 3 Provided by IHSNot for ResaleNo repro

13、duction or networking permitted without license from IHS-,-,-Maj or I 101 102 103 i04 105 106 107 Minor I 201 202 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-5. PACKAGING 5.1 Preservation (levels A and commercial), 5.1.1 Level A. 5.l.l.l - size 2

14、 inches by 4 inches. (4) Retaining ring MS 16624 - 4037 (4 ea). Package %he retaining rings in accordance with method IC-1 by applying type P-7 preservative oil to all surfaces of each item, and placing each in a MIL- E-.17 bag, type I, class C, style 1, size 2=1/2 inches by 3 inches, each bag by he

15、at sealing. Close (5) Connector orifice assembly 15-19-1829 (4 ea) . Package the connector in accordance with method IA-8 by wrapping each connector in MILJ3-121, barrier material, ty-pe II, grade A, class 1, size 6 inche8 by 6 inches and securing with PPP-T-60 tape, size 2 inches by 4 inches* Place

16、 the four wrapped items in a MIL-3-117 bag, type I, style 1, class E, size 8 inches by 8 inches, Close the bag by heat sealing. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Provided by IHSNot for ResaleNo reproduction or networking permitted wit

17、hout license from IHS-,-,-6, NOTES 6,i Intended use, This specification covers one type of installation kit designed to facilitate installation of Ml3Al filter unit in applic- able armored vehicles, 6,2 Ordering data. Procurement documents should specify the following: Title, number and date of this specification, Level of packaging and packing required, (a) (b) Custodian : Preparing activity: Army-m Project No. 4240-A532 *U.S. GOVERNMENT PRINTING OFFICE: 1979-803422/4024 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-