ARMY MIL-M-12563-1953 MANIFOLD GAS CYLINDER (MANIFOLD ML-344 TMQ-3)《瓦斯钢瓶歧管(歧管ML-344 TMQ-3)》.pdf

1、.-. MIL-M-12563 36 7777706 0244385 T E -3kv E-23-35 - . MIL -M-l25 63 (SigC) . Superseding U. S. Army Specification No. 74-85 7 December 1945 i3ILITAFtY , SPECIFICATION 10 March 1953 MANIFOLD, GAS CYLINDER (MANIFOLD ML-344/TMQ-3) 1. SCOPE 1.1 This specification covers a metal device by means of whic

2、h four Hydrogen ;enerators ML-303/TM are assembled to a common outlet which serves as a nozzle for cttachment and inflation of sounding balloons. 2. APPLICABLE SPECIFICATIONS, STANDARDS, DRAWINGS, AND PUBLICATIONS 2.1 The following specifications, standards, and drawings, of the issue in effect n da

3、te of invitation for bids, form a part of this specification: SPECIFICATIONS FEDERAL NN-B-591 NN-B-601 NN-B-621 UU-T-111 MLITARY JAN-P-105 JAN-P-106 MIL -B - 107 JAN-P-108 MIL -P-116 JAN-P-127 *MIL-H-11127 STANDARDS MILlTARY MIL -STD -1 O 5 MIL -STD -129 ipplied for information only. Boxes, Fiberboa

4、rd, Woodqleated (For Domestic Shipment) Boxes, Wood -Cleated -Plywood (For Domestic Shipment) Boxes, Wood, Nailed, and Lock-Corner Tape; Paper, Gummed (Sealing and Securing) -Packaging and Packing for Overseas Shipgent - Boxes; Wood, Cleated, Plywood Packaging and Packing for Overseas Shipment - Box

5、es; Wood, Nailed - Boxes, Wood, Wirebound (Overseas Type) Packaging and Packing for Overseas Shipment - . Boxes, Fiberboard (V-Board and W-Board), Exterior and interior Preservation, Methods of Packaging and Packing for Overseas Shipment - Tape, Adhesive, Pressure-Sensitive, Water Resistar Hydrogen

6、Generator ML-303/TM Sampling Procedures and Tables for Inspection By Attributes Marking of Shipments . Sheet 1 of 6 sheets . : _ r - . . - - . . . . . - -._- x . “ . $ t: - Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networki

7、ng permitted without license from IHS-,-,- MIL-M-LZSb3 36 9999906 0244386 1 ei Spec. No. Manifold, Gas Cylinder MIL -M-l2563(SigC) (Manifold ML-344/TMQ-3) sheet #2 I DRAWINGS SIGNAL CORPS *SC -D-7431 Hydrogen Generator ML-303/TM, Assembly and Details SC -DL -8 6460 Manifold ML,-344/TMQ-3, Drawing an

8、d Data List (Copies of specifications, standards and drawings required by contractors in connection with specific procurement functions should tv obtained from or as directed by the contracting officer. Both the title and identifying number or symbol should be stipulated when requesting copies.) . 3

9、. REQUIREMENTS , 3.1 Preproduction samples. - 3.1.1. Quantities.- After award of contract two preproduction samples of Manifold hIL-3-3 shall be furnished. . 3.1.2 Compliance with specified requirements.- 3.1.2.1 Preproduction samples shall meet specified requirements, shall be made and assembled by

10、 tools and methods that will be used for quantity production, and shall be accompanied by a statement to that effect. (See 3.1.2.3 for exception.) of any specified requirement. After being released to the contractor (see 3.14, preproduction samples to be offered as units OR contract shall be refabri

11、cated by the contractor if necessary to meet specified requirements. may be submitted for approval provided that the accompanying statement describes in detail each nonconforming feature, reason therefor, and manner in which it will be corrected in production of equipment on contract. 3.1.2.2 Approv

12、al of preproduction samples shall not be construed as a waiver 3.1.2.3 When deviation from 3.1.2.1 is unavoidable, the preproduction samples 3.1.3 Test data .- The preproduction samples shall be accompanied by test data showing compliance with specified performance. The test data shall comprise an e

13、ngineering report giving test procedure, observations and other data, calculations, test results, and essential details of the testing equipment (manufacturer 6 model, serial number, there shall be no evidence of leakage around the welds. Visual and mechanical inspection. - Manifold ML-344/TMQ-3 sha

14、ll be thoroughly Welding.- The welded connections shall be tested to withstand an air *. -, . ! . . - .* Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I % MIL-N-LZ563 3b 7777906

15、 0244387 7 Spec. No. Manifold, Gas Cylinder MIL -12563(SigC) (Manif old ML - 344/TMQ -3) Sheet #5 5. PREPARATION FOR DELIVERY 5.1 Preservation and packaging.- 5.1.1 For domestic shipment.- Manifold ML-344/TMQ-3 shall be preserved and packaged in accordance with Method I of Specification MIL-P-116. 5

16、.1.2 For export shipment.- Preserve and package Manifold hIL-344/TMQ-3 in accordance withprocedures specified for the designated methods as prescribed in Specification MIL-P-116, and further described in the following paragraphs. 5.1.2.1 Cushion each with gummed Manifold ML-344/TMQ-3.- Package each

17、item Method J, as follows: item by wrapping in flexible .corrugated paper. Secure the cushioning Kraft tape conformint to Specification -T-111. 5.1.2.2 Consolidated package. - Consolidate the items, packaged as specified in 5.1.2.1, together within a suitable style and grade fiberboard box, conformi

18、ng to Specification JAN-P-108. Fill all voids with flexible corrugzted paper to pre- vent movement. Seal entire box closure, corners and joints, with vater-resistant pressure -sensitive tape, conforming to Specification JAN-P-127. 5-2 Packing.- 5.2.1 For domestic shipment.- Manifold ML-433/ThIQ-3 sh

19、all be packed in wood- cleated fiberboard, wood-cleated plywood, nailed wood, or corrugated fiberboard boxes conforming to Specification NN-B-591, NN-B-601, Nh-B-621, and LLL-B-631, respectively. Closures shall be made in accordance with the applicable box speci- fication. 5.2.2 For export shipment.

20、- Place a suitable quantity of cjnsolidated packages within a wood cleated Rlvwood nailed wood or wire bound wood box conformine: to the requirements of Speciiications JAN-P-105, JAN-P-106 and MIL-B-107 respetively. Fabricate the boxes to fit contents snugly. The approximate gross weight of any exte

21、rior shipping container shall not exceed 150 pounds. Close the shipping con- tainer as specified in the appendix of the applicable box specification, 5.2.2.1 ments of the appendix of the applicable container specification only for direct shipment to ports. shall be marked in accordance with applicab

22、le provisions of MIL-STD-129. Shipping containers shall be strapped in conformance with the require- 5.3 Marking for shipment.- interior packages and exterior shipping containers 5 Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or

23、networking permitted without license from IHS-,-,-flIL-U-LZ563 36 7777706 02L111370 3 Ei Spec. No. Manifold, Gas Cylinder MIL -M -12563(SigC) (Manifold ML-344/TMQ -3) Sheet #6 6. NOTES 6.1 Ordering data.- Procurement documents should specify the followg: (a) (b) Title, number, and date of this speci

24、fication. Whether domestic or overseas shipment is required. (c) Samples required. (See 3.1.) (d) Marking and shipping of samples. (e) Acceptable quality level. (See 4.1.1(b).) 6.2 Contractual requirements.- It is recommended -a- included in the contract: he follow-ig be 6.2.1 Additional testing. -

25、It should be understood that additional inspection and non-destructive testing of equipment may be performed by the Government inspector when considered necessary to determine compliance with this specification and other applicable document. The government inspector, therefore, may withdraw material

26、s, parts, subassemblies, or components temporarily from production for such inspection and testing, performed either at a Government laboratory or the contractor s plant. 6.2.2 Waiver of preproduction samples. - When items for which preproduction samples are required are currently in production on a

27、 Government order, the contractor may-apply to the contracting officer for waiver of preproduction samples on the new order. Any request should include a statement indicating that the specified samples have been submitted and approved on the current contract; production of the item under the new ord

28、er will be concurrent with, or follow without interruption, produc- tion on the current order; and current production is in strict compliance with specified requirements for the new equipment, or describing any deviations authorized on the current order. Waiver of preproduction samples may be contin

29、gent on renegotiation of the contract to reflect the saving in cost to the contractor, NOTICE: When Government drawings, specifications, or other data are used for any purpose other than in connection with a definitely related Government procurement operation, the United States Government thereby in

30、curs no responsibility nor any obligation whatsoever; and the fact that the Government may bave formulated, furnished, or in any way supplied the said drawings, specifications, or other data is not to be regarded by implication or otherwise as in any manner licensing the holder or any other person o

31、r corporation, or conveying any rights or permission to manufacture, use or sell any patented invention that may .in any way be related thereto. :. 6 -. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-