ARMY MIL-M-63508-1982 MINE METAL PARTS FOR MINES BLU-91 B AND BLU-92 B《地雷和地雷金属零件 BLU-91 B和BLU-92 B型》.pdf

1、s-37-03 MIL-M-b3508 23 m 777790b 0353078 5 m M IL-M-6350 8GR)- 8 MARCH i982 MILITARY SPECIFICATION MINE, METAL PARTS FOR MINES: BLU-91/B AND BLU-92/B This specification is approved for use by the U.S. Army Armament Research and Development comnand, and is available for use by all Departments and Age

2、ncies of the Department of Defense. 1. SCOPE 1.1 This specification contains requirements not normally covered by drawings and provides quality assurance provisions for the fabrication and packaging of the metal parts for the Mines: Antipersonnel, BLU-92/B. Antitank, BLU-91/B, and 2. APPLICABLE DOCU

3、MENTS 2.1 Issues of documents. The following documents of the issue in effect on date of invitation for bids or request for proposal form a part of this specification to the extent specified herein. SPECIFICATIONS I MILITARY MIL-C-5541 - Chemical Conversion Coatings on Aluminum and MIL-A-48078 - Alu

4、minum Alloys Ammunition Standard Quality Assurance Provisions, General Specification for FEDERAL QQ-P-35 - Passivation Treatments for Corrosion Resisting Steel TT-C-490 - Cleaning Method and Pretreatment of Ferrous Surfaces fqr Organic Coatings STANDARDS MILITARY MIL-STD-105- - Sampling Procedures a

5、nd Tables for Inspection by A t tri bu tes FSC: 1345 i Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-M-63508 13 m 7777706 0351077 7 m . MIL-M-63508(AR) MIL-STD-1188- Comercial Packaging of Supplies and Equipment DRAWINGS (See 6.5) U.S. ARMY ARM

6、AMENT RESEARCH AND DEVELOPMENT COMMAND 9292715 - Cover 9292716 - Housing Aeroballistic 9292723 - Clip, Borerider ,9328744 - Pin, Borerider 9292731 - .Fastener, Push-on 9332383 - Spacer End Cover Assembly (Copies of specifications, standards, drawings and publications required by suppliers in connect

7、ion with specific procurement functions should be obtained from the procuring activity or as directed by the Contracting Officer.) 2.2 Other publications The following documents form a part of this specification to the extent specified herein. Unless otherwise indicated, the issue in effect on the d

8、ate of invitation for bids or request for proposal shall apply. ASTM B 117 Standard Method of Salt Spray (Fog) Testing ASTM E 18 Rockwell Hardness and Rockwell Superficial Hardness of Metallic Mat er i als 3. REQUIREMENTS 3.1 Materials. Materials shall be in accordance with the applicable drawings a

9、nd specifications. 3.2 Components and assemblies. The parts shall comply with all requirements specified on drawings listed in paragaraph 2.1 and associated drawings and with all requirements specified in applicable specifications and standards. 3.3 Salt spray. The designated parts shall withstand e

10、xposure to salt spray when tested as specified in 4.5.2. 3.4 Hardness. The Push-on Fastener, Dwg 9292731, shall pass the hardness test as specified in 4.5.3. 3.5 First article inspection. This specification contains technical provisions for first article inspection. Requirements for the submission o

11、f iirst article samples by the conkractor shali be as specified in the contract. 3.6 Workmanship. All part and assemblies shall be fabricated, and assembled in a thorough, workmanlike manner. They shall be free of burrs, chips, sharp edges, cracks I surf ace defects, dirt, grease, rust, corrosion pr

12、oducts and other foreign matter. The cleaning method used shall not be injurious -to any part nor shall the parts be contaminated by the cleaning agent. :All required markings shall be neat and sharply defined. .* 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license

13、 from IHS-,-,-MIL-Pi-63508 13 U 7777906 0351100 T 4. QUALITY ASSURANCE PROVISIONS 4.1 Responsibility for inspection and standard quality assurance provisions. Unless otherwise specified herein or in the contract, the provisions of MIL-A-48078 shall apply and are hereby made a part of this detail spe

14、c if i cat i on. 4 4.2 Classification of inspections. The following types of inspection shall be conducted on this item: a. First Article Inspection b, Quality Conformance Inspect-ion 4.3 First article inspection 4.3.1 Submission. The contractor shall submit a first article sample as designated .by

15、the contracting officer for evaluationin accordance with provisions of 4.3.2. items in sample quantities as indicated: The First Article sample shall consist of the following I Part Description Cover Housing, Aeroballistic Clip, Borerider . Pin, Borerider Fastener, Push-on Cover Assembly Cover, Spac

16、er Spacer, Lens Eyelet, Borerider Spacer End Cover Assembly Drawings Quant i t y 92927 15 92927 16 9292723 9328744 9292731 9332379 9332382 9332380 9 33 238 1 9332383 10 10 10 10 15 10 10 10 10 10 4.3.2 Inspection to be performed. See MIL-A-48078 and Table I specified herein. 4.3.3 Rejection. See MIL

17、-A-48078. 3 . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-M-b350 13 W 7777906 035L101 L F a C1 b t d w I u) cl rd CI m r; 2 Ci m 4- CI . m rr) CCI m ,m mmm m O O 4 d U E *rl Fri v) aJ .rl d P v) UJ m o. ai E m v) ai 5 d 5 al P 4 I4 m .=i cn U

18、 U ai w 01 CI -. v) u u aJ w ai w kU ow Wal U v) U u aJ u W u kU aidW ai a kl- .t O U yj v) v) LI LI u U a, al ICI u-! ai EI al a ;od P. .rl m LILI I . .rl e N N N N m m m m v1 u u al ci al fn LI 0 W w W d cn v1 u LI Provided by IHSNot for ResaleNo reproduction or networking permitted without licens

19、e from IHS-,-,-MIL-M-63508 13 779770b 035LL03 5 =#3L-M-.63508 (AR) 4.4 Quality conformance inspection 4.4.1 Inspection lot formation. Inspection lots shall comply with the lot formation provisions of MIL-A-48078. 4.4.2 Examination. (See MIL-A-48078). Unless otherwise specified in the Classification

20、of Defects and Test tables, sampling plans for major and minor defects shall be in accordance with MIL-STD-105, Inspection Level II. . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-M-63508 23 W 977770b 0353309 7 W r 4 8 t d W 3: v) . 0000000000

21、000 o4 n -.rt n u .t u) a,v) 4aJ o4 kic o a,P W a, d bo E k a, a O k .rl 2 rll .?I LI Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-8 4 .II. O 4 iN a 2 -9-4 lu ai a a .-I .-I -1 J 8 i -. Provided by IHSNot for ResaleNo reproduction or networking pe

22、rmitted without license from IHS-,-,-MIL-il-63508 13 7777906 035LL06 O m 4 8 t 4 w I y 1 ! $4 a, d .r( Ll al $4 O m n a .r( 4 u e 6 c O I I- u v 3 O U 2aJ UN Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-4 LL O 4 I MIL-Pi-63508 33 m 9777706 0353307

23、 2 m In a W c .FI u4 Iu a aJ z t-l U O m O aJ a Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-. w I 3 O cr i B * H i rn I- # n 8 hL w Z O Fi w 2 11 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-v)

24、 cn w )I t 51 u ell u 3 .l. P.4 L O +. t w w k QI u (d P v) k a, u h z . . II. . l-4 m . . GOG O00 04 n m v $4 W a O k 8 .rl a .A 8 O a ri ,I rl a6 ma al UY -P m Fio U Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-Pi-63508 13 W 777770b 035LL10

25、2 W i P 4 L P U C U v U I 3 I 5 L 8 t 5 74 w k a, a .I4 k al k O m U aJ mmmm mm M M M MM mo u30 O00 44.3 I . O00 o4 n m W . In m I pi I a CY Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-M-b350 13 M 7777906 035LLLL 2 t; 5 rl w w H O O0 o 5: 4 O

26、0 O U U u al a (o k u *rl 3 U al rl o) h o) LI I 0 rl k o) k O rei n a 2 O .iI cii o) a o) z 2 e u- s tr 3 !i aJ .a Ll O O a 2 A U Y-, .Pl e O Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-U-63508 13 W 7977706 0351112 b W I .* d 8 t d w X ln N

27、N N N N y N Ne F1 N N y c.1 iD . . m mmmmmmmmmmmmm . b. 0000000000000 4 V al e .rl u al w h U k O O a ici O al U a k .rl 81;: N c Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I I ! h P E al v) l4 2 8 k al u a e w k al u m a Cn Cu gal 1 bo v)M v) C

28、u .d (d .r( 0 30 3 o O0 4 a al .r( I+ a a rd h Il k al a O al k k O O O P a al El al z E . h -I g d 2 d E d O d al v) 3 i a c - Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-M-b350B 33 7797706 0353334 T M - MIL -M-6 3 50 8 ( AR) 4.4.3 Testing.

29、Testing is described in the First Article and Quality Conformance Inspection tables. 4.4.4 Inspection equipment. The inspection equipment (gage) required to perform the inspections and tests prescribed in this specification is identified in the Paragraph Reference/Inspection Method column in the tab

30、les starting with paragraph 4.4.2.1, and the test method paragraph (see 4.5). The contractor shall submit for approval, inspection equipment designs in accordance with the terms of the contract. See Section 6 of MIL-A-48078, and 6.3 here in. 4.5 Test methods and procedures 4.5.1 Salt spray test. The

31、 applicable parts shall be tested in accordance with ASTM-B-117 using a 5% salt solution and with the requirements specified on the applicable drawings and specifications, The rejection criteria shall be as specified in the applicable specifications. Assemblies subjected to this test shall not be re

32、turned to the lot. 4.5.2 Hardness test. A sample of five (5) push-on fasteners shall be selected from each lot or heat treat batch and tested for hardness in accordance with ASTM-E-18. The lo or heat treat batch shall be reject.ed if any sample fails to meet the hardness requirement specified on the

33、 drawing. 5. PACKAGING 5.1 Preservation-packaging. Packaging shall be Level B in accordance with M IL-STD- 11 88. 5.2 Packing. Packing shall be Level B in accordance with MIL-STD-1188. 5.3 Marking. Marking shall be Level B in accordance with MIL-STD-1188. 6. NOTES 6.1 Intended use. The metal parts c

34、overed by this specification are intended for assembly of the BLU-Bl/B Anti-tank, and BLU-92/B Antipersonnel Mines. 6.2 Ordering data. Procurement documents shall specifiy the following: a. Title, number, and date of this specification. b. Provisions of MIL-A-48078. c. Provisions for submission of f

35、irst article samples. 6.3 Submission of inspection equipment designs for approval. (See MIL-A-48078). Submit equipment designs as required, to Commander, U.S. Army Armament Research and Development Command, ATTN: DRDAR-QAT-I, Dover, New Jersey 07801. 17 Provided by IHSNot for ResaleNo reproduction o

36、r networking permitted without license from IHS-,-,-P MIL-1-63508 13 9977906 0353335 L W _ - MIL-M-63508(AR) 6.4 Distribution of ammunition data cards. Distribution of data cards shall include the following: Commander, U.S. Army Armament Research and Development Cowand, ATTN: DRDAR-QAT-M, Dover, New

37、 Jersey 07801. 6.5 Drawings. Drawings listed in Section 2 of this specification under the heading U.S. Army Armament Research and Development Command (ARADCOM) may also include drawings prepared by, and idendified as, Edgewood Arsenal, Frankf ord Arsenal, Rock Island Arsenal, or Picatinny Arsenal dr

38、awings. Techincal data originally prepared by these activities is now under the cognizance of ARRADCOM. Custodian : Army -AR Preparing Act i vit y Ar my -AR Project Number: 1345-Al70 :r U.C. GOVERNMENT PRINTING OFFICE 1982 O - 505-02211790 18 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-