ARMY MIL-P-48648-1986 PROJECTILE 155MM TEST NON-HAZARDOUS M718A1 M741A1 TYPES LOADING ASSEMBLING AND PACKING《M718A1 M741A1型155 mm无害试验弹的装药 组装和包装》.pdf

1、1 MIL-P-qBb48 33 777770b 0322835 5 M 5-37- 05 Beneficial comments (recommendations, additions, deletions) and any pertinent chtm which may be of use in improving this document should be addressed to: Commander, US Army Armament Research and Development Center, Attn: AMSMC-QA, Dover, New Jersey 01801

2、5001 by using the self-addressed Standardization Document Improvement MIL-P-4 8 64 8 (AR) 31 July 1986 5 Y MILITARY SPECIFICATION PROJECTILE, 155MM, TEST, NON-HAZARDOUS,M718Al/M741Al TYPES LOADING, ASSEMBLING AND PACKING OF This Specification is approved for use by the U.S. Army Armament, Munitions

3、 and Chemical Command, and is available for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the fabrication of parts, assembly, and packin

4、g for the Projectile, 155MM, Test, Non-Haz, M718Al/M741Al. 2. APPLICABLE DOCUMENTS 2.1 Government documents. 2.1.1 Specifications and standards. Unless otherwise specified (see 6.2), the following specifications and standards of the issue listed in that issue of the Department of Defense Index of Sp

5、ecifications and Standards (DoDISS) specified in the solicitation, form a part of this specification to the extent specified herein. SPECIFICATIONS MILITARY MIE-S-45743 Soldering, Manual Type, High Reliability Electrical and Electronic Equipment. MIL-A-48078 Ammunition, Standard Quality Assurance Pr

6、ovisions, General Specifications for FSC 1320 Approved for public release; distribution is unlimited. AMSMC NIA DISTRIBUTION STATENENT A. 1 of 36 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I MIL-P-LI8bq 33 W 7779706 0322836 7 W MIL-P-48648 (AR)

7、STANDARDS MIL I TARY MIL-STD-105 Sampling Procedures and Tables for MIL-STD-453 Inspection, Radiographic 1 nspec t ion by Attributes. MIL-STD-1235 Single and Multi-Level Continous Sampling Procedures and Tables for Inspection by Attributes 2.1.2 Other Government documents, drawinqs, and ublications.

8、 The following other Government documents, drawings, gnd publications form a part of this specification to the extent specified herein. DRAWINGS U.S. ARMY ARMAMENT RESEARCH AND DEVELOPMENT CENTER PRODUCT AND PACKAGING DRAWINGS 8837839 Pallet, Projectile, 155MM, HE and GB, Hollow Base type 9317605 Mi

9、ne, Test, Non-Haz (M718) 93 176 08 Mine, Test, Non-Haz (M741) 11786215 Projectile, 155MM, AT, M718A1 11786216 Projectile, 155MM, Test, Non-Haz, M718A1 11786240 Projectile, 155MM, AT, M741A1 11786241 Projectile, 155MM Test, Non-Haz, M741A1 Type Type (Copies of specifications, standards, handbooks, dr

10、awings, and publications required by manufactures in connection with specific acquisition functions should be obtained from the contracting activity or as directed by the contracting officer.) 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-P-4

11、8b48 33 m 777770b 0322837 7 m MIL-P-48648 (AR) AMERICAN SOCIETY FOR TESTING AND MATERIALS ASTM D 792- Specific Gravity and Density of Plastics by Displacement , Method A-1 . CODE OF FEDERAL REGULATIONS Code of Federal Regulations, Title 49- Transportation Parts 100-199. (Applications for copies shou

12、ld be addressed to: American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA. 19102.) c (The Code of Federal Regulations is available from the Superintendent of Documents, US Government Printing Office, Washington, DC 20402. Orders should specify “49 CFR 100-199 (latest revisio

13、n) “. American Society for Testing and Material (ASTM) Standards for test methods are generally available in reference libraries. They are also distributed among technical groups and certain federal agencies. 3. REQUIREMENTS 3.1 Material. Materials shall be in accordance with the 3.2 Projectile. The

14、 projectile assembly, mines, and applic able d raw ing s and spec i fica t ions. components shall comply with all requirements specified on drawings 11786216 and 11786241, all associated drawings, and with all requirements of the applicable specifications. 3.3 S i.e. no cracks in the lead sheathing,

15、 or neck down (reduction in diameter) below 75% of the original diameter, anywhere along the Length of the MDF. 3.4 Soldering of the flexprint to the electronic assembly terminals. Soldering of the terminals shall comply with MIL-S-45743. 3.5 M-S plate to electronic assembly interface. The M-S plate

16、 shall mate with the cover flange of the electronic assembly around the entire circumference. Gaps shall not exceed .O10 inch under hand pressure. 3.6 Non-hazardous mine S- 8 ci si rl Li a, a O Li E .d ar (II rd E! h rrl 1- Ja, le 0.4 .d G (II c 24 3 LI i! 8 i W O a, u c a, W -4 3 w ici )u ia, b-n a

17、 r# I I I. IH ,H % a, c -4 tu a, u a, c d a, 3 m O 4 u I I3 m n 5 E 23 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-P-LIbLI 13 m 799990b 0322838 b m h 2 Y 03 w W 03 * I pi I c 8 r P I- dPdpdp dpdp dpdp O00 dp dPdp o o O0 e. o 00 rld O00 rl li

18、d o o O0 W“, o O0 w -3 m a a aJ ci a, c rl .d P a a rlrl cv m u .FI Li U .FI Li nimw rn wr- a2 O00 o O0 o -q: ddrl rl rlrl rl u x Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-HI Cn d4J E *c j 1 4J u) a, E MIL-P-qb9B 13 777770b 0322837 8 m I rl rlrl (d (da 3 35 u) am -A .?i .ri 3 33 U a, ul S a, 9 w O c 2 E u C 3 c - I- n m M tn 3 d 7 n O KI F ul a, U a a, i .;i 0 3 EU -rl C 4 01 30 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-