ARMY MIL-P-52910 B-1988 PALLET CARGO FOR RIBBON BRIDGE TRANSPORTER《货盘桥式运输车》.pdf

1、- fiIL-P-5293OB 54 M 7797706 0223280 2 W 3-05 /z MIGP-52910B (ME) 11 Mav 1988 CxPERSDm Ml“Gp-52910A (ME) 8 Madl 1979 mis specification is approved for use within the Um Belvoir -, Developent and Engineering center, Department of the Anny, and is available for use by all Departmentc and Agenciec of t

2、he Department of Defence. 1. i same. mis specification covers cargo paiiets capable of functioning with the ribbon bridge transporter. 2.1 Governmentdocnmients. 2.1.1 cpec ifications, standardc, and handbwb. me following specifications, standardc, an handbooks fonn a part of this specification to be

3、 extent specified herein. unless atherwise specified, the issues of these documents shall be those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation. E7Emmms MILJTARY MILrSIW105 MIG-129 MIIrSIW209 MIL-SCD

4、-889 - DissMlar Metals. - Sampling Pmceures and Tables for Inspection by - Markirig for -pent and storage. - Slinging and Tiedm Provisions for Lift- and Tying uwn Military Equipnent. Attriixitec. Beneficial CCamnents (recupmnendations, additions, deletions) and any pertinent data wid.ument or by let

5、ter, STREE-TSE, N/A FSC 5420 DISTRIEWTW f3TXmmR A. Approved for public release, distribution is unlimited. THIS DOCUMENT CONTAINS / PAGES. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-P-5273OB 54 m 7777706 0223283 i.I m MIGP-5291OB (ME) 2.1.2

6、ther Government dccmmts, drawb, and niblications. Ihe foilawing other Government doc=uments, drawings, and publications form a part of this specification to the extent specified herein. unless otherwise specified, the issues shall be those in effect on the chte of the solicitation. Wil3 22 U658 6 13

7、22637234 - pallet: - camouflage Pattern and Inspection. Cargo, For Fikhn Bridge, !mnsprte.r. (copies of specifications, ctandardc, handbooks, drawings, publications, and other Government documente requrred by contractors in mnmction with specific acquisition functions should be abtained fman the con

8、tractingactivity or as dhected by the contracting officer.) specification to the extent specified herein. Unless otherwise specified, the issues of the documente which are DOD adopted shall be those listed in the issue of the DoDSS specified in the solicitation. issues of doc=uments not listed in th

9、e DoDISS shall be the issue of the non- Wernment docnmientc whil Welders. Before assim any welder or welding aperator to a welding aperation cavered by this specification, the corrtiractor shall fail- shuwing a statistical pattern, even when repairable, shall constitute failure of the test. During t

10、he Miiity test only, 4.6 Inme-ecewation anci pa ckins (see 6.91. 5.1.1 Mlets. carpact bunile. securing devices. 5.2 Mar- (see. 6.91. accadan with MIGsn-129. Ihree to seven pallets shall be bundled togeUier to fom a aie bunile simil be secured by utilizing the im=orporated Markhg for shipnmt and stor

11、age shall be in 6.1 intended use. 6.2 orderhm data. Aagxisition documents should specify the follmhq: nie cargo pallet is desigre Drovisions (OAPI . The contracting officer should require the wntractor to maintain records of all QAP inspections. A suggested pragraph is as follcrwc: 9 Provided by IHS

12、Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-P-529LOB 5q = 977990b 0223289 9 U c MIliF52910B (ME) Illhe contractor chal1 maintain cosrgplete records of all examinations and tests prformed to verify the requirements of classified QAP characteristics. Ihe reco

13、rds shall include, as a minimum, lot size, -le size, drawing requirement, actual measurement, nunber and types of deficiencies faund, quantity appmve, quantity rejected, corrective action taken when agplicable.“ 6.8 Definitions. 6.8.1 QU& itv ascuram=e pmvisions (OAp) . AQAPchawnonthedrawh.sisa that

14、 cupplts section 4 of the specification. QKRS contractua requirement indicate the minimm requirements dch must be hqected on the end product and assure intemhangeability of repair parts. 6.9 FYesemation and mckinq . Degrees of preservation and packing have not been included since the precewation spe

15、cified is the minimm acceptable for any degree of protection and no packing is required. precewation/packing level marking, the pailets shall be mke A/A. For purposec of mlet pallet cargo Pallet cargo, ribbon bridge transporter 6.11 Qlans es from mevious issue. Asteriskc (or vertical ih) are not use

16、 in this revision to identify changes with respect to the pmiauc issue due to the extensivenecc of the changes. custodian: preparing activity: -ME Project 5420-A365 10 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-P-52910B 54 9999906 0221290 5 2 J a a I a I O I + 2 I O N 5 -F? d 1 o I3 :-! Io 0 o o U Il &US. GOVERNMENT FIIINllNC OFFICE: IWII - SO!W33/92268 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-