ARMY MIL-P-60812 (2)-1969 PROJECTILE 4 2 INCH WP SMOKE M328A1 METAL PARTS ASSEMBLY《M328A1式4 2英寸白磷发烟弹(WP)用金属件组件》.pdf

1、3c . . MILITARY SPECIFICA!IXON PROJECTILE, 4.2 INCH, WP, SMOKE, 3281 METAL PARTS ASSEKPJLY .a This amendment forms a part of Military Specification MI-P=6081s(h!U) dated 5 February 1968. . Paragraph 4 . 3.2.3 For MINOR characteris-t;ic 201. add “(if applicable)“ Paragraph 4.3.2.7 For MINOR character

2、istic 215. change “Depty“ to “Depth“ . ., . ._ . ! i .- Paragraph 4.3.2.8 For CRITICAL characteristic 4. add “NOTEfo To be inspected only after all manufacturing and gaging operations have bee cnmpleted“ For MINOR characteristic 209. to *VCI crystais missing“. change !Va paper missing“ Add new parag

3、raph 4.4.1.1.1.1 “4.4.1.1.1.1 One piece body.-In addition to the specimens removed and tested in accordance with 4.4.1.1.1 above, when the one piece body:is used one tension test specimen conforming to the largest obtainable staridard “R“ type specimen as prescribed by Federal Test Method Standard N

4、o. l5l-shaU. be taken in a %ramverse direction one inch from the centerline of the base of . . each sangle. The specimens shall be tested in accordance w&th the criteria for determining yield strength and elongation as prescribed by Federal Stanflard No. 151. Yield strength shall be determined by th

5、e offset method. The lbdting set shall be 0.1 percent (0.001) inch per inch of gage length.“. i. - * Themargins of this amendment are marked with an asterisk to indicate where changes (additions, modifications, corrections, deletions) from the previous issue were made. no liability wkiatsoever for a

6、ny inaccuracies -in these notations. Bidders and contractors are cautioned to evaluate t3e requirements of this document based, on the entire content irrespective of the marginal notaticns and relationship to the last previous issue. This was done as a convenience only and the Government assumes Custodian Aw-MU Preparing activity Project No. i315 -A710 ArmY-m . FSC 1315 ,- A Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-