ARMY MIL-PRF-39001 5 E-2009 CAPACITORS FIXED MICA DIELECTRIC ESTABLISHED RELIABILITY STYLES CMR03 CMR04 CMR05 CMR06 CMR07 AND CMR08《已设可靠指标的 CMR03 CMR04 CMR05 CMR06 CMR07 AND CMR08型.pdf

1、AMSC N/A FSC 5910 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. INCH-POUND MIL-PRF-39001/5E 18 February 2009 SUPERSEDING MIL-PRF-39001/5D 17 February 2000 PERFORMANCE SPECIFICATION SHEET CAPACITORS, FIXED, MICA DIELECTRIC, ESTABLISHED RELIABILITY, STYLES CMR03, CM

2、R04, CMR05, CMR06, CMR07, AND CMR08 This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification and MIL-PRF-39001. NOTES: 1. Dimensions are in inches (see table I)

3、 2. Millimeters are in parenthesis (see table I). 3. Metric equivalents (to the nearest .01 mm) are given for general information only. 4. The “R“ dimension may not be solderable as it may be covered by a clear epoxy or resinous coating. FIGURE 1. Styles CMR03, CMR04, CMR05, CMR06, CMR07, and CMR08

4、 capacitors. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39001/5E 2 TABLE 1. DimensionsSTYLE CMR03 . 300 V 100 V 50 V 300 V, 100 V, and 50 V Capacitance L W T L W T L

5、W T R MAX A spacing M DIA (pF) MAXIMUM MAXIMUM MAXIMUM .031 (.79) .002 (.05) 1 to 12 inclusive .270 (6.86) .190 (4.83) .110 (2.79) .078 (1.98) .120 (3.05) .016 (.41) 15 .270 (6.86) .190 (4.83) .120 (3.05) .270 (6.86) .190 (4.83) .110 (2.79) .078 (1.98) .120 (3.05) .016 (.41) 18 and 20 .270 (6.86) .2

6、00 (5.08) .120 (3.05) .270 (6.86) .190 (4.83) .110 (2.79) .078 (1.98) .120 (3.05) .016 (.41) 22 and 24 .270 (6.86) .200 (5.08) .120 (3.05) .270 (6.86) .190 (4.83) .120 (3.05) .270 (6.86) .190 (4.83) .110 (2.79) .078 (1.98) .120 (3.05) .016 (.41) 27 .270 (6.86) .200 (5.08) .130 (3.30) .270 (6.86) .19

7、0 (4.83) .120 (3.05) .270 (6.86) .190 (4.83) .110 (2.79) .078 (1.98) .120 (3.05) .016 (.41) 30 and 33 .270 (6.86) .200 (5.08) .130 (3.30) .270 (6.86) .200 (5.08) .120 (3.05) .270 (6.86) .190 (4.83) .110 (2.79) .078 (1.98) .120 (3.05) .016 (.41) 36 .270 (6.86) .210 (5.33) .130 (3.30) .270 (6.86) .200

8、 (5.08) .120 (3.05) .270 (6.86) .190 (4.83) .110 (2.79) .078 (1.98) .120 (3.05) .016 (.41) 39 .270 (6.86) .210 (5.33) .130 (3.30) .270 (6.86) .200 (5.08) .120 (3.05) .270 (6.86) .190 (4.83) .120 (3.05) .078 (1.98) .120 (3.05) .016 (.41) 43 .270 (6.86) .210 (5.33) .140 (3.56) .270 (6.86) .200 (5.08)

9、120 (3.05) .270 (6.86) .190 (4.83) .120 (3.05) .078 (1.98) .120 (3.05) .016 (.41) 47 and 51 .270 (6.86) .210 (5.33) .140 (3.56) .270 (6.86) .200 (5.08) .130 (3.30) .270 (6.86) .190 (4.83) .120 (3.05) .078 (1.98) .120 (3.05) .016 (.41) 56 .270 (6.86) .220 (5.59) .150 (3.81) .270 (6.86) .200 (5.08) .

10、130 (3.30) .270 (6.86) .190 (4.83) .120 (3.05) .078 (1.98) .120 (3.05) .016 (.41) 62 .270 (6.86) .220 (5.59) .150 (3.81) .270 (6.86) .210 (5.33) .130 (3.30) .270 (6.86) .200 (5.08) .120 (3.05) .078 (1.98) .120 (3.05) .016 (.41) 68 .270 (6.86) .220 (5.59) .150 (3.81) .270 (6.86) .210 (5.33) .140 (3.5

11、6) .270 (6.86) .200 (5.08) .120 (3.05) .078 (1.98) .120 (3.05) .016 (.41) 75 and 82 .270 (6.86) .230 (5.84) .160 (4.06) .270 (6.86) .210 (5.33) .140 (3.56) .270 (6.86) .200 (5.08) .120 (3.05) .078 (1.98) .120 (3.05) .016 (.41) 91 .270 (6.86) .230 (5.84) .170 (4.32) .270 (6.86) .210 (5.33) .140 (3.56

12、) .270 (6.86) .200 (5.08) .130 (3.30) .078 (1.98) .120 (3.05) .016 (.41) 100 and 110 .270 (6.86) .240 (6.10) .180 (4.57) .270 (6.86) .220 (5.59) .150 (3.81) .270 (6.86) .200 (5.08) .130 (3.30) .078 (1.98) .120 (3.05) .016 (.41) 120 .270 (6.86) .250 (6.35) .190 (4.83) .270 (6.86) .220 (5.59) .160 (4.

13、06) .270 (6.86) .200 (5.08) .130 (3.30) .078 (1.98) .120 (3.05) .016 (.41) 130 .270 (6.86) .230 (5.84) .160 (4.06) .270 (6.86) .210 (5.33) .130 (3.30) .078 (1.98) .120 (3.05) .016 (.41) 150 .270 (6.86) .230 (5.84) .170 (4.32) .270 (6.86) .210 (5.33) .140 (3.56) .078 (1.98) .120 (3.05) .016 (.41) 160

14、 .270 (6.86) .240 (6.10) .170 (4.32) .270 (6.86) .210 (5.33) .140 (3.56) .078 (1.98) .120 (3.05) .016 (.41) 170 and 180 .270 (6.86) .240 (6.10) .180 (4.57) .270 (6.86) .210 (5.33) .140 (3.56) .078 (1.98) .120 (3.05) .016 (.41) 200 .270 (6.86) .250 (6.35) .190 (4.83) .270 (6.86) .220 (5.59) .150 (3.8

15、1) .078 (1.98) .120 (3.05) .016 (.41) 220 .270 (6.86) .220 (5.59) .150 (3.81) .078 (1.98) .120 (3.05) .016 (.41) 240 .270 (6.86) .220 (5.59) .160 (4.06) .078 (1.98) .120 (3.05) .016 (.41) 270 .270 (6.86) .230 (5.84) .160 (4.06) .078 (1.98) .120 (3.05) .016 (.41) 300 .270 (6.86) .230 (5.84) .170 (4.3

16、2) .078 (1.98) .120 (3.05) .016 (.41) 330 and 360 .270 (6.86) .240 (6.10) .180 (4.57) .078 (1.98) .120 (3.05) .016 (.41) 390 and 400 .270 (6.86) .250 (6.35) .190 (4.83) .078 (1.98) .120 (3.05) .016 (.41) Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for Re

17、saleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39001/5E 3 TABLE I. DimensionsCapacitance - Continued. L T W, R, A spacing M Dia (pF) Min Max Min Max max max .031 (.79) .002 (.05) STYLE CMR04 1 to 24, inclusive .300 (7.62) .360 (9.14) .100 (2.54) .190 (4.83) .330 (8.

18、38) .125 (3.18) .150 (3.81) .016 (.41) 27 .300 (7.62) .370 (9.40) .100 (2.54) .190 (4.83) .330 (8.38) .125 (3.18) .150 (3.81) .016 (.41) 30 to 68, inclusive .300 (7.62) .370 (9.40) .100 (2.54) .190 (4.83) .340 (8.64) .125 (3.18) .150 (3.81) .016 (.41) 75 .300 (7.62) .370 (9.40) .110 (2.79) .200 (5.0

19、8) .340 (8.64) .125 (3.18) .150 (3.81) .016 (.41) 82 .300 (7.62) .370 (9.40) .110 (2.79) .200 (5.08) .350 (8.89) .125 (3.18) .150 (3.81) .016 (.41) 91 and 100 .300 (7.62) .370 (9.40) .110 (2.79) .200 (5.08) .350 (8.89) .125 (3.18) .150 (3.81) .016 (.41) 110 and 120 .300 (7.62) .380 (9.65) .110 (2.79

20、) .200 (5.08) .350 (8.89) .125 (3.18) .150 (3.81) .016 (.41) 130 .300 (7.62) .380 (9.65) .110 (2.79) .200 (5.08) .360 (9.14) .125 (3.18) .150 (3.81) .016 (.41) 150 and 160 .300 (7.62) .380 (9.65) .120 (3.05) .210 (5.33) .360 (9.14) .125 (3.18) .150 (3.81) .016 (.41) 180 .300 (7.62) .390 (9.91) .120

21、3.05) .210 (5.33) .370 (9.40) .125 (3.18) .150 (3.81) .016 (.41) 220 to 390, inclusive .300 (7.62) .390 (9.91) .140 (3.56) .220 (5.59) .380 (9.65) .125 (3.18) .150 (3.81) .016 (.41) STYLE CMR05 1 to 62, inclusive .400 (10.16) .450 (11.43) .090 (2.29) .170 (4.32) .360 (9.14) .125 (3.18) .225 (5.72)

22、025 (.64) 68 to 82, inclusive .400 (10.16) .450 (11.43) .095 (2.41) .180 (4.57) .360 (9.14) .125 (3.18) .225 (5.72) .025 (.64) 91 and 100 .400 (10.16) .460 (11.68) .095 (2.41) .180 (4.57) .360 (9.14) .125 (3.18) .225 (5.72) .025 (.64) 110 to 130, inclusive .400 (10.16) .460 (11.68) .095 (2.41) .180

23、 (4.57) .370 (9.40) .125 (3.18) .225 (5.72) .025 (.64) 150 to 180, inclusive .400 (10.16) .460 (11.68) .110 (2.79) .190 (4.83) .370 (9.40) .125 (3.18) .225 (5.72) .025 (.64) 200 .400 (10.16) .460 (11.68) .110 (2.79) .190 (4.83) .380 (9.65) .125 (3.18) .225 (5.72) .025 (.64) 220 and 240 .400 (10.16)

24、460 (11.68) .110 (2.79) .200 (5.08) .380 (9.65) .125 (3.18) .225 (5.72) .025 (.64) 270 to 330, inclusive .400 (10.16) .470 (11.94) .110 (2.79) .210 (5.33) .390 (9.91) .125 (3.18) .225 (5.72) .025 (.64) 360 and 390 .400 (10.16) .470 (11.94) .120 (3.05) .220 (5.59) .400 (10.16) .125 (3.18) .225 (5.72

25、) .025 (.64) STYLE CMR06 430 and 470 .550 (13.97) .640 (16.26) .090 (2.29) .200 (5.08) .510 (12.95) .141 (3.58) .350 (8.89) .032 (.81) 510 to 620, inclusive .560 (14.22) .650 (16.51) .090 (2.29) .200 (5.08) .510 (12.95) .141 (3.58) .350 (8.89) .032 (.81) 680 to 910, inclusive .560 (14.22) .650 (16.5

26、1) .100 (2.54) .210 (5.33) .510 (12.95) .141 (3.58) .350 (8.89) .032 (.81) 1000 and 1100 .560 (14.22) .650 (16.51) .110 (2.79) .220 (5.59) .520 (13.21) .141 (3.58) .350 (8.89) .032 (.81) 1200 and 1300 .570 (14.48) .660 (16.76) .110 (2.79) .220 (5.59) .520 (13.21) .141 (3.58) .350 (8.89) .032 (.81) 1

27、500 .570 (14.48) .660 (16.76) .120 (3.05) .230 (5.84) .520 (13.21) .141 (3.58) .350 (8.89) .032 (.81) 1600 .570 (14.48) .660 (16.76) .120 (3.05) .230 (5.84) .530 (13.46) .141 (3.58) .350 (8.89) .032 (.81) 1800 and 2000 .580 (14.73) .670 (17.02) .130 (3.30) .240 (6.10) .530 (13.46) .141 (3.58) .350 (

28、8.89) .032 (.81) 2200 .580 (14.73) .670 (17.02) .140 (3.56) .250 (6.35) .530 (13.46) .141 (3.58) .350 (8.89) .032 (.81) 2400 .580 (14.73) .670 (17.02) .150 (3.81) .260 (6.60) .540 (13.72) .141 (3.58) .350 (8.89) .032 (.81) 2700 .590 (14.99) .680 (17.27) .160 (4.06) .270 (6.86) .540 (13.72) .141 (3.5

29、8) .350 (8.89) .032 (.81) 3000 .590 (14.99) .680 (17.27) .170 (4.32) .280 (7.11) .550 (13.97) .141 (3.58) .350 (8.89) .032 (.81) 3300 .590 (14.99) .680 (17.27) .180 (4.57) .290 (7.37) .550 (13.97) .141 (3.58) .350 (8.89) .032 (.81) 3600 .590 (14.99) .680 (17.27) .190 (4.83) .300 (7.62) .560 (14.22)

30、141 (3.58) .350 (8.89) .032 (.81) 3900 .600 (15.24) .690 (17.53) .200 (5.08) .310 (7.87) .560 (14.22) .141 (3.58) .350 (8.89) .032 (.81) 4300 .600 (15.24) .690 (17.53) .220 (5.59) .330 (8.38) .570 (14.48) .141 (3.58) .350 (8.89) .032 (.81) 4700 .610 (15.49) .700 (17.78) .220 (5.59) .350 (8.89) .580

31、 (14.73) .141 (3.58) .350 (8.89) .032 (.81) STYLE CMR07 5100 .680 (17.27) .780 (19.81) .150 (3.81) .280 (7.11) .860 (21.84) .141 (3.58) .425 (10.80) .040 (1.02) 5600 and 6200 .680 (17.27) .780 (19.81) .150 (3.81) .290 (7.37) .870 (22.10) .141 (3.58) .425 (10.80) .040 (1.02) 6800 .680 (17.27) .780 (1

32、9.81) .150 (3.81) .300 (7.62) .870 (22.10) .141 (3.58) .425 (10.80) .040 (1.02) 7500 .690 (17.53) .790 (20.07) .150 (3.81) .310 (7.87) .880 (22.35) .141 (3.58) .425 (10.80) .040 (1.02) 8200 .690 (17.53) .790 (20.07) .150 (3.81) .320 (8.13) .880 (22.35) .141 (3.58) .425 (10.80) .040 (1.02) 9100 .690

33、17.53) .790 (20.07) .150 (3.81) .330 (8.38) .880 (22.35) .141 (3.58) .425 (10.80) .040 (1.02) 10,000 .700 (17.78) .800 (20.32) .200 (5.08) .340 (8.64) .890 (22.61) .141 (3.58) .425 (10.80) .040 (1.02) 11,000 .700 (17.78) .800 (20.32) .200 (5.08) .350 (8.89) .890 (22.61) .141 (3.58) .425 (10.80) .04

34、0 (1.02) 12,000 .700 (17.78) .800 (20.32) .200 (5.08) .360 (9.14) .890 (22.61) .141 (3.58) .425 (10.80) .040 (1.02) 13,000 .710 (18.03 ) .810 (20.57) .250 (6.35) .370 (9.40) .890 (22.61) .141 (3.58) .425 (10.80) .040 (1.02) 15,000 .710 (18.03 ) .810 (20.57) .250 (6.35) .390 (9.91) .900 (22.86) .141

35、3.58) .425 (10.80) .040 (1.02) 16,000 .720 (18.29) .820 (20.83) .250 (6.35) .410 (10.41) .900 (22.86) .141 (3.58) .425 (10.80) .040 (1.02) 18,000 .720 (18.29) .820 (20.83) .250 (6.35) .430 (10.92) .910 (23.11) .141 (3.58) .425 (10.80) .040 (1.02) 20,000 .730 (18.54) .830 (21.08) .250 (6.35) .450 (1

36、1.43) .920 (23.37) .141 (3.58) .425 (10.80) .040 (1.02) Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39001/5E 4 TABLE I. DimensionsCapacitance - Continued. L T W, R, A

37、spacing M Dia (pF) Min Max Min Max max max .031 (.79) .002 (.05) STYLE CMR08 22,000 1.300 (33.02) 1.420 (36.07) .180 (4.57) .310 (7.87) .880 (22.35) .141 (3.58) 1.050 (26.67) .040 (1.02) 24,000 1.310 (33.27) 1.430 (36.32) .180 (4.57) .320 (8.13) .880 (22.35) .141 (3.58) 1.050 (26.67) .040 (1.02) 27,

38、000 1.320 (33.53) 1.430 (36.32) .180 (4.57) .330 (8.38) .880 (22.35) .141 (3.58) 1.050 (26.67) .040 (1.02) 30,000 1.330 (33.78) 1.440 (36.58) .180 (4.57) .350 (8.89) .890 (22.61) .141 (3.58) 1.050 (26.67) .040 (1.02) 33,000 1.330 (33.78) 1.440 (36.58) .180 (4.57) .360 (9.14) .890 (22.61) .141 (3.58)

39、 1.050 (26.67) .040 (1.02) 36,000 1.340 (34.04) 1.450 (36.83) .180 (4.57) .380 (9.65) .900 (22.86) .141 (3.58) 1.050 (26.67) .040 (1.02) 39,000 1.340 (34.04) 1.450 (36.83) .220 (5.59) .400 (10.16) .900 (22.86) .141 (3.58) 1.050 (26.67) .040 (1.02) 43,000 1.350 (34.29) 1.460 (37.08) .225 (5.72) .420

40、10.67) .910 (23.11) .141 (3.58) 1.050 (26.67) .040 (1.02) 47,000 1.360 (34.54) 1.470 (37.34) .250 (6.35) .450 (11.43) .910 (23.11) .141 (3.58) 1.050 (26.67) .040 (1.02) 51,000 1.370 (34.80) 1.480 (37.59) .250 (6.35) .470 (11.94) .920 (23.37) .141 (3.58) 1.050 (26.67) .040 (1.02) 56,000 1.350 (34.29

41、) 1.460 (37.08) .225 (5.72) .420 (10.67) .910 (23.11) .141 (3.58) 1.050 (26.67) .040 (1.02) 62,000 1.360 (34.54) 1.470 (37.34) .250 (6.35) .450 (11.43) .920 (23.37) .141 (3.58) 1.050 (26.67) .040 (1.02) 68,000 1.370 (34.80) 1.480 (37.59) .260 (6.60) .470 (11.94) .920 (23.37) .141 (3.58) 1.050 (26.67

42、) .040 (1.02) 75,000 1.370 (34.54) 1.470 (37.34) .240 (6.10) .440 (11.18) .910 (23.11) .141 (3.58) 1.050 (26.67) .040 (1.02) 82,000 1.370 (34.80) 1.480 (37.59) .310 (7.87) .460 (11.68) .920 (23.37) .141 (3.58) 1.050 (26.67) .040 (1.02) 91,000 1.390 (35.31) 1.500 (38.10) .340 (8.64) .500 (12.70) .940

43、 (23.88) .141 (3.58) 1.050 (26.67) .040 (1.02) Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39001/5E 5 REQUIREMENTS: Dimension: See figure 1 and table I. Case: Resin (d

44、ipped). Capacitance value: See table II. Capacitance tolerance: See table II. DC rated voltage: 50 V (Y); 100 V (A); 300 V (C); or 500 V(D), as shown in table II. Operating temperature range: See table II. Characteristic: See table II. Product level: See table II. Barometric pressure: Method 105 of

45、MIL-STD-202, condition D (100,000 ft). Test potential - 100 percent of rated dc voltage for style CMR04, 500 volts; 150 percent for lesser voltages and all other styles. Insulation resistance (IR): Method 302 of MIL-STD-202, test condition A: (Minimum requirements): At 25C: 0 to 10,000 pF 100,000 me

46、gohms 10,000 pF and greater 1,000 megohm-microfarads At 125C: 0 to 3,300 pF 10,000 megohms 3,300 pF and greater 33 megohm-microfarads At 150C 0 to 1,500 pF 5,000 megohms 1,500 pF and greater 7.5 megohm-microfarads Dissipation factor (DF): See MIL-PRF-39001. High voltage stabilization: 200 percent of

47、 rated dc voltage for 48 hours at a minimum temperature of 125C or 150C, as applicable. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39001/5E 6 Thermal shock: In accord

48、ance with MIL-PRF-39001 except high temperature shall be as follows: Symbol O - +125C. Symbol P - +150C. Immersion: In accordance with MIL-PRF-39001 except Cap.- shall not exceed 1 percent or 1pF,whichever is greater, of reference measurement. Terminal strength: Pull test - For style CMR03 and CMR04

49、 pull shall be applied in the direction of the leads. Moisture resistance: In accordance with MIL-PRF-39001 except Cap. shall not exceed 1 percent or 1 pF, whichever is greater, of reference measurement. Life: Forty eight hours, minimum, at -55C +0C, -2C immediately followed by qualification or quality conformance test, as applicable. Qualification test: 2,000 hours at applicable high test temperature wi