ARMY MIL-PRF-49137 5 C-2009 CAPACITORS FIXED ELECTROLYTIC (SOLID ELECTROLYTE) TANTALUM POLAR MOLDED NONHERMETICALLY SEALED STYLE CX05《CX05型非气密性密封模塑钽(固体电解质)电解固定极性电容器》.pdf

1、INCH-POUND MIL-PRF-49137/5C SUPERSEDING 19 February 2009 MIL-PRF-49137/5B 22 April 2004 PERFORMANCE SPECIFICATION SHEET CAPACITORS, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM, POLAR, MOLDED, NONHERMETICALLY SEALED, STYLE CX05 This specification is approved for use by all Departments and Agenc

2、ies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification and MIL-PRF-49137. CIRCUIT DIAGRAMNOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Metric equivalents are in parenthes

3、es. FIGURE 1. Dimensions and configuration. AMSC N/A FSC 5910 Dimensions Case size Diameter D .015 (0.38) Length L .020 (0.51) A .085 (2.16) .250 (6.35) B .100 (2.54) .280 (7.11) C .170 (4.32) .335 (8.51) D .170 (4.32) .410 (10.41) Copyright Communications - Electronics Command Provided by IHS under

4、 license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-49137/5C 2TABLE I. Style CX05 characteristics. Type designation 1/ DC rated voltage (85C) Capacitance (nominal) DC leakage (max) +25C Dissipation factor Case size CX05D475- CX05D156- CX05D336

5、- CX05D476- Volts 6 6 6 6 F 4.7 15 33 47 A 1.0 1.0 1.5 3.0 % 6 8 8 8 A B C D CX05F335- CX05F106- CX05F226- CX05F276- CX05F336- CX05F396- CX05F476- 10 10 10 10 10 10 10 3.3 10 22 27 33 39 47 1.0 1.0 1.5 2.0 3.0 5.0 5.0 6 8 8 8 8 8 8 A B C D D D D CX05H225- CX05H685- CX05H156- CX05H226- CX05H336- 15 1

6、5 15 15 15 2.2 6.8 15 22 33 1.0 1.0 1.5 3.0 5.0 6 6 8 8 8 A B C D D CX05J155- CX05J475- CX05J126- CX05J156- 20 20 20 20 1.5 4.7 12 15 1.0 1.0 1.0 3.0 6 6 8 8 A B D D CX05K105- CX05K225- CX05K335- CX05K685- CX05K106- 25 25 25 25 25 1.0 2.2 3.3 6.8 10 1.0 1.0 1.0 1.5 1.5 4 6 6 6 8 A B B C C CX05M334-

7、CX05M474- CX05M155- CX05M335- CX05M395- CX05M475- CX05M685- CX05M106- 35 35 35 35 35 35 35 35 0.33 0.47 1.5 3.3 3.9 4.7 6.8 10 1.0 1.0 1.0 1.5 1.5 1.5 3.0 5.0 4 4 6 6 6 6 6 8 A A B C C C D D CX05N104- CX05N154- CX05N224- CX05N334- CX05N474- CX05N684- CX05N105- CX05N155- CX05N225- CX05N335- CX05N475-

8、 50 50 50 50 50 50 50 50 50 50 50 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.5 1.5 2.0 3.0 4 4 4 4 4 4 4 6 6 6 6 A A A B B B B C C D D 1/ Complete type designation will include an additional symbol indicating capacitance tolerance. Copyright Communications - Elec

9、tronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-49137/5C 3REQUIREMENTS: Dimensions and configuration: See figure 1. Case material: Molded, epoxy or plastic. Leads: Solder-coated metal. DC rated voltage:

10、 See table I. Operating temperature: -55C to +85C. DC leakage (DCL): See table I. Capacitance (cap.): See table I. Cap. tolerance: 10% (K), or 20% (M). Dissipation factor (DF): See table I. Stability at low and high temperature: In accordance with MIL-PRF-49137. Step 1 (+25C): DCL - See table I. Cap

11、. - Within tolerance specified in table I. DF - See table I. Step 2 (-55C): Cap. - Within -15 percent of step 1 measured value. DF - 200 percent of table I. Step 3 (+25C): DCL - See table I. Cap. - Within 10 percent of step 1 measured value. DF - See table I. Step 4 (+85C): DCL - 10 times 25C limit

12、(see table I). Cap. - Within +15 percent of step 1 measured value. DF - 150 percent of table I. Step 5 (+25C): DCL - See table I. Cap. - Within 10 percent of step 1 measured value. DF - See table I. Surge voltage: In accordance with MIL-PRF-49137. DCL - See table I. Cap. - Within 10 percent of initi

13、al value. DF - See table I. Life: Method 108 of MIL-STD-202. 1,000 hours: At 25C: DCL - 200 percent of table I. Cap. - Within 10 percent of initial measured value. DF - See table I. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or

14、 networking permitted without license from IHS-,-,-MIL-PRF-49137/5C 4These capacitors are intended to be used only where supplemental moisture protection is provided or for noncritical applications where hermetic moisture protection is not required. NOTES: Reference documents. In addition to MIL-PRF

15、-49137, this specification sheet references the following documents. MIL-STD-202 (Copies of these documents are available online at http:/assist.daps.dla.mil/quicksearch or http:/assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19

16、111-5094). Changes from previous issues. The margins of this specification are marked with asterisks to indicate where changes from previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and co

17、ntractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Custodians: Preparing activity: Army - CR Army - CR Navy - EC Air Force - 85 DLA - CC Agent: Review activities: DLA -

18、CC Navy - AS, MC, OS, SH Air Force - 19 (Project 5910-2009-017) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil . Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-