ARMY MIL-PRF-53007 B-1996 ROLLER KIT ROLLER MINE CLEARING TRACK-WIDTH TANK-MOUNTED《罐装轨道宽度压路机扫雷滚包》.pdf

1、 flIL-PRF-53007B 9999906 20Lit250 %9 9 pmzq MIL-PRF-53007B (AT) 2 Januarv 1996 SUPERSEDING 20 May 1986 MIL-R-!53007A(ME) PERFORMANCE SPECIFICATION ROLLER KIT, ROLLER, MINE CLEARING: TRACK-WIDTH, TANK-MOUNTED This specification is approved for use within U.S. Army Tank-automotive and Armaments Comman

2、d, Department of the Army, and is available for use by all Departments and Agencies of “the Department of Defense. 1. SCOPE 1.1 Scope. This specification defines the requirements for a roller kit, used in the mine clearing roller system kit (M60 series tank). 2. APPLICABLE DOCUMENTS 2.1 Gend. The do

3、cuments listed in this section are specified in sections 3 and 4 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this

4、list, document users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this specification, whether or not they are listed. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this docume

5、nt should be addressed to: U.S. Army Tank-automotive and Armaments Command, ATTN: AMSTA-TR-EBLUE, Warren, MI 48397-5000, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this I document, or by letter. I AMSC NIA FSC 1095 DISTRIBUTION STATEMENT A Appro

6、ved for public release; distribution is unlimited. Licensed by Information Handling ServicesProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NIL-PRF-53007B R 999990b 2014251 025 MIL-PRF-53007B (AT) 2.2 Govemnt docm menailure. 4.6.1 Materials. Conforma

7、nce to 3.2 and 3.4 thru 3.4.4 shall be determined by inspection of contractor records providing proof or certification that materials conform to requirements. Applicable records shall include drawings, specifications, design data, receiving inspection records, processing and quality control standard

8、s, vendor catalogs and certifications, industry standards, test reports, and rating data. 5. PACKAGING 5.1 Packacing For acquisition purposes, the packaging requirements shall be as specified in the contract or order (see 6.2). When actual packaging of materiel is to be performed by DoD personnel, t

9、hese personnel need to contact the responsible packaging activity to ascertain requisite packaging requirements. Packaging requirements are maintained by the Inventory Control Points packaging activity within the Military Department or Defense Agency, or within the Military Departments System Comman

10、d. Packaging data retrieval is available from the managing Military Departments or Defense Agencys automated packaging files, CD-ROM products, or by contacting the responsible packaging activity. 9 Licensed by Information Handling ServicesProvided by IHSNot for ResaleNo reproduction or networking pe

11、rmitted without license from IHS-,-,- - MIL-PRF-53007B m 999990b 2014259 3Lb MIL-PRF-53 007B(AT) 6. NOTES (This section contains information of a general or explanatory nature which may be helpful, but is not mandatory.) 6.1 Intended use. The kit contains a left and right assembly to be attached to

12、the front of a modified M60 series tank which will neutralize single pulse pressure mines in fi-ont of the tanks track and tilt rod mines in the tank belly area. 6.2 Acauisition requirements. Acquisition documents must speci the following: a. Title, number, and date of this specification. b. Issue o

13、f DoDISS to be cited solution and ifrequired, the specific issue of individual documents referenced (see 2.2 and 2.3). c. If first article is required (see 3.3). d. Color required when other than specified (see 3.7 and 6.6). e. Lubricant requirements (see 3.12). f Additional test requirements (see 4

14、.3.3.1). g. Packaging requirements (see 5.1). 6.3 First article. When a first article inspection is required, the items should be a first production model. The first article should consist of one or more kits. The contracting officer should include specific instructions in acquisition documents rega

15、rding arrangements for examinations, tests, and approval of the first article test results and disposition of the first article. 6.4 Subiect term kev word) listing. Belly area LeR assembly Modified M60 series Neutralize Right assembly Single pulse pressure Tilt rod 6.5 Definitions. 6.5.1 Recovered m

16、aterials. “Recovered materials“ means materials that have been collected or recovered from solid waste (see 6.5.2). 6.5.2 Solid waste. “Solid waste“ (a) any garbage, refse, or sludge from a waste treatment plant, water supply treatment plant, or air pollution control facility; and ) other discarded

17、10 Licensed by Information Handling ServicesProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-flIL-PRF-53007B W 9999906 2034260 038 MIL-PRF-5 3 007B (AT) material, including solid, liquid, semisolid, or contained gaseous material resulting from industr

18、ial, commercial, mining, and agricultural operations, and fi-om community activities. It does not include solid or dissolved materiais in domestic sewage, or solid or dissoIved material in irrigation return flows or industrial discharges which are point sources subject to permits under sections 402

19、of the Clean Water Act, (33 U.S.C. 1342 et seq.), or source, special nuclear, or byproduct material as defined by the Atomic Energy Act of 1954 042 U.S.C.201 1 et seq.) (Source: Federal Acquisition Regulations, section 23.402). 6.6 Government-furnished property The contracting officer should mange t

20、o furnish the following property as required: Item No. Description Identification Ouantity 1 Pattern drawings Camouflage As patterns required 6.7 Welders qualification. Subject to approval by the Government, the contractors standard welder qualification may be substituted, provided that the contractors procedure is equivalent to the AWS and ASME codes (see 3.9.2.1). Custodian: Army - AT Preparing activiy: Army - AT (Project 1095-0292) 11 Licensed by Information Handling ServicesProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-