ARMY MIL-S-70682-1990 SIMULATOR FLASH ARTILLERY M21 PARTS FOR AND LOADING ASSEMBLING AND PACKING《M21型闪光模拟器零件的装载 组装和包装》.pdf

1、. MIL-S-70682 (AR) 30 March 1990 MILITARY SPECIFICATION SIMULATOR, FLASH, ARTILLERY , M21 PARTS FOR AND LOADING, ASSEMBLING AND PACKING This specification is approved for use within the US Army Armament, Munitions and Chemical Command, and is available for use by all Departments and Agencies of the

2、Department of Defense. c 1. SCOPE 1.1 Scope. This specification contains requirements not covered bye drawings and provides quality assrance provisions for the fabrication of parts for and loading, assembling and packing for one type of simulator designated as Simulator, Flash Artillery, M21. 2. APP

3、LICABLE DOCUMENTS 2.1 Government documents. 2.1.1 Specifications, standards and handbooks. The following specifications standards, and handbooks form a part of this document to the extent specified herein. unless otherwise specified, the issues of these documents are those listed in the issue of the

4、 Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (see 6.2). SPEC1 FICATI ONS MILITARY MIL-P-116 -Preservation - Packaging, Methods of MIL-A-48078 -Ammunition, Standard Quality Assurance Provisions, General Specification For Benef

5、icid cwiments (mxmmadatim, additicms, deletim) and my pertioent data which may be sf ue in hpvg this document sbauld be addriessed to: canmander, U.S. hy ARDEC, AT“ SMCAR-BAGS, Picatinny Arsed, New Jersey 78065 by using the d-addnsed Staddm tim Doniment fnprovnient Proposai (Di3 i?m 1426) appearing

6、at the end of this document orbylefter. FSc 1370 P.NT G Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-70682 13 7777906 0437779 2 I MIL-S-70682 (AR) STANDARDS MILITARY MIL-STD-105 -Sampli

7、ng Procedures and Tables for MIL-STD-331 . -Fuze and Fuze Components, Environmental MIL-STD-1234 -Pyrotechnics, Sampling, Inspection and MIL-STD-1235 -Single and Multi-Levei Continuous Inspection by Attributes and Performance Test For Testing Sampling Procedure (Unless otherwise indicated, copies of

8、 federal and military specifications, standards, and handbooks are available from the Military Specifications and Standards, Bldg. 4D, 700 Robbins Ave., Philadelphia, PA 19111-5094.) 2.1.2 Other Government documents, drawings and mblications. The followinq other Government documents, drawings, and p

9、ublications form a part of this document to the extent specified herein. Unless otherwise specified, the issues are those cited in the solicitation. DRAWINGS US ARMY ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER (ARDEC) PRODUCT AND PACKAGING DRAWINGS 9322059 -Simulator, Flash, Artillery, M21

10、 9342970 -Packing and Marking fior Box, Paperboard, 9342972 -Packing and Marking for Box, Packing, for for Simulator, Flash, Artillery, M21 Simulator, Flash, Artillery, M21 (Copies of drawings, and publications required by manufacturers in connection with specific acquisition functions should be obt

11、ained from the contracting activity or as directed by the contracting officer). the text of this document and the references cited herein the text of this document takes precedence. Nothing in this document however, supersedes .applicable laws and regulations unless a specific exemption has been obt

12、ained, 2.2 Order of precedence. Inthe event of a conflict between 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1 MIL-S-70682 13 m 77777Ob 0438000 3 I MIL-S-70682 (AR) 3. REQUIREMENTS 3.1 Materials. Materials and parts shall be in accordance with

13、 applicable drawings, specifications and standards. 3.2 Assembly. The Simulator Assembly shall comply with all. requirements specified on Drawing (dwg.) 9322059, and all associated drawings, and with all requirements specified in applicable specifications and standards. 3.3 Moisture content. 3.3.1 C

14、harge composition. The moisture content of the charge composition at the loading station at the time of loading shall not exceed 0.10 percent. paper and paper products componeni of the simulator assembly at the loading station at the time of loading shall not exceed 6.0 percent . _- 3.3.2 Paper and

15、paper products. The moisture content of the 3.4 Functioninq (Ambient temperature, 21 + 3OC, 70 + SF, - Hot 51.5 + 3OC, 125 + 5OFf Cold -32 + 3OCf -25+ 5OF). The assembly shall function and comply with the-following requirements after conditioning at specified temperature. the simulator shall be a mi

16、nimum of 124 decibels (db) min. to 147 decibels (db) max. when measured at a distance of 96 + .5 meters from the item under test. 3.4.1 Sound characteristics. The sound level intensity of - 3.4.2 Functioning time. The time from application of twenty-four (24) plus or minus (2) two (2) Volts Direct C

17、urrent (VDC), with minimum ignition current of 3.0 milliwatt seconds/ohm, to initiation of the assembly shall not be greater than 0.50 seconds. 3.4.3 Flash characteyistics. The flash intensity of the simulator shall be 4 x 10” candlepower minimum (min.). Residual smoke shall be white in appearance.

18、3.4.4 Heat soak at-1600F. (Flrst Article Test Only) The packaged .simulators (in barrTer bag) shall meet the functionina requirements of 3.4.1, 3.4.2, and 3.4.3 after being subjected fo a temperature of 71.1 + 3OC, 160 + 5OF for a minimum period of four (4) weeks. Prior to functioning, the simulator

19、 assembly resistance shall not exceed 2.0 ohms maximum. 3.4.5 Temperature - humidix. (First Article Test Only) The packaged simulators (in barrier bag) shall meet the functioning requirements of 3.4.1, 3.4.2, and 3.4.3 after exposure to temperature - humidity as specified in 4.5.3.5. Prior to functi

20、oning, the simulator assembly resistance shall not exceed 2.0 ohms maximum. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-70682 13 6 777770b OLI3OOL 5 W MIL-S-70682 (AR) 3.4.6 Functional timing sequencinq of the electric iqniter. (First Art

21、icle Test Only) The continuity of the electric igniter shall be 10 milliseconds (ms) minimum at 12 VDC (nominal) at 0.5 amperes (amp). It shall produce an open circuit (if only for an instant) within 25 ms of receiving 12 VDC at 1 ampere when tested as specified in 4.5.3.6. 3.5 Jumble. The simulator

22、 shall comply with the following requirements. a. The simulator shall not function during test. b. There shall be-no powder leakage. c. The simulatorcomponents shall not separate during test. 3.6 Water immersion test. The simulator shall be capable of withstanding exposure to water immersion as spec

23、ified in 4.-5.6 and shall meet the functioning requirements of 3.4.1, 3.4.2, and 3.4.3. 3.7 First article inspection. This specification contains technical provisions for first article inspection. Requirements for the submission of first article samples by the contractor shall be as specified in the

24、 contract. 3.8 Workmanship. All parts and assemblies shall be fabricated and finished in a thorough, workmanlike manner. They shall be free of burrs, chips, sharp edges, cracks, crazes, porosity, warpage, burn marks, blisters, excess flash, scratches, dirt, grease and other defects and foreign matte

25、r which would affect appearance or serviceability. The cleaning method used shall not be injurious to any part nor shall the parts be contaminated by the cleaning agent. be neat, legible and sharply defined. All packing components shall be dry. All required markings shall 4. QUALTIY ASSURANCE PROVIS

26、IONS 4.1 Responsibility for inspection. Unless otherwise specified inthe contract-or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use h,is own

27、or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplie

28、s and services conform to prescribed requirements. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-70b2 13 777970b 0438002 7 I MIL-S-70682 (AR) 4.1.1 Responsibility for compliance, All items must meet all requirements of sections 3 and 5. thi

29、s specification shall become a part of the contractors overall inspection system or quality program. inspection requirements in the specification shall not relieve the contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with al

30、l requirements of the contract. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, nor does it commit the Government to acceptance of defective material. The inspection set forth in The absence of any 4.2 Classification of inspectio

31、ns. The following types of inspection shall be conducted on this item: a. First Article Inspection. b. Quality Conformance Inspection. 4.3 First article inspection 4.3.1 Submission. The contractor shall submit a first article sample as designated by the Contracting Officer or evaluation in accordanc

32、e with provisions of 4.3.2 and 4.3.3. The first article sample shall consist of the following items in sample quantities as indicated: Part Description Cap, Protecting Container, Flash Charge Body Tube Assembly Tube Igniter, Electrical Assy (less quickmatch) Cover, Flash Charge Quickmatch Cable, Ele

33、ctrical Plug, Electrical Assembly Insert, Threaded Pin, Electrical Cap, Short Circuit Assembly Match, Electrical Match and Cable Assembly Packing and Marking Packing and Marking for Box Drawings 9342132 9342142 9342143 9342144 9342145 9342148 9342149 9342150 9342153 9342154 9342155 9342156 9342157 9

34、354514 9354515 9342970 9342972 4.3.2 Inspections to be performed. I specified herein. Quantity 5/cavi ty 5/cavity 5/cavity 10 25 15 5/oavi ty 25 10 5/cavi ty 25 25 5/oavi ty 15 15 18 1 box/162 items See MIL-A-48078 and Table 4.3.3 Rejection. See MIL-A-48078. Provided by IHSNot for ResaleNo reproduct

35、ion or networking permitted without license from IHS-,-,-MIL-S-70682 13 a 977770b 0438003 9 c O .rl u u al fa (o (1: *ri al d u .rl 4J Li Id U .rl k vi Li H e w d m 4 H h 3 W N 03 19 O r- I m I c r r r 8 o 0 v) d Y Y P Z 5 J .u mol m ruru (v 9m 9 ww 9 .e . * hl * e ru Nm ru hl ru Cu m m mm m rr) . .

36、 I I II I I Q Il (o mo Liu ma, ccw U VI c, o a, * (o ai rl QI E (d (o U 02 a, c, E O Li w c ai rr Id u ai Q d d m c (o iJ u) ai +J IB -rl c o Li O iI-I ai ri pi E Id a n Id u Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-c O u u a, II) C -4 a, rl u

37、 .r( u LI Id u II) :j cy .Pl Crmu u i .Pl ai aik 33m OCIX U“ II) u u a, w ai a w u u 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-70682 13 W 7777706 0438005 2 I m b M E a (v rl Cu rti -Y * rti rl Cu rti rti . . W rl Cu di di . . rti Cu Cu

38、rti -=Y . . Cu cv m M . W . NCu* Cu Cu MMM M m . . I I III I 3.i 3.i Ua, mu ar: 21 IBL( al 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-c O .4 U u a, a u) c H a, ri u -4 c, u 4 c, u) Li .rl Cri . H w d 4 B m h 4 Y cv CO ID O I- l cn I d E IL W n

39、 8 MIL-S-70682 13 O6 0438006 4 I 3r u a, rl rl -4 c, !4 -U cc u) ac do Cria a .o Liu O U5 (de ria 5 Ed -4 cv cnc ri a, U 0- rlcvm rlcvm l-+ rl ri4 cv* Ncv cvmIDmmmm mmmm * *mmmmmm mmmm * w*e* *w . . . cvcv mm rlcvm ricvm cv*ID*sy* *e* mmmmmmm mmmm . . sy . I IIIIIII IlII CVCOCO WOOID ridrlrn ID m 9

40、u) u) a, ri Y U u) a, 21 JJ ari Lis umc u *OriU aLn4aa emu u E am a-424 CLiO ri ,I h a, !4 5 U a, U 5 U a u a, pi E a, U 5 c a C O .I4 u) u a, E E .rl LI a, U a 5 u a, U w a 5 a, a u O w Li a, a a, a O U m c -4 U. mm ac U -4 c eo o -4 -4 c, u -rl u5 cc 50 criu - Provided by IHSNot for ResaleNo repro

41、duction or networking permitted without license from IHS-,-,-rn b rn 6 1E 5 c m rl (u E si Li 0, rl rl -4 U Li 4 G u) m rl F h(o Liu oc UQ) (oc 40 5Ql 4 v N 03 W O I vi I LI c MIL-S-70682 13 7979706 0438018 O alalalalal alalal5 mmmmm mmmo NNtvNN NNN03 mmmmm mmmm . dpdpdPdPdP dP*#dP 00000 VIVIVIO *-Y

42、* wloloo 00000 0004 . 21 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-70682 13 9991906 04380L9 2 rl 8 t r! s a a, .o # a, LI JI E-i ci $4 a, IB E: H 4 dPdPdPB dPdP O000 VIO -P*=J- wo O000 Od b. 5 a, tn # 5 z LI O tn -c, c u (du u0 O0 EPI 22

43、Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-70682 13 H 797770b 0438020 7 m 2 O H H U w pi CI 2 H w u 2 p1 O F z O u 3.4 H cl a 2 H 3 h Ri Y u Co W O r- I ul I 4 H c dPdPdPdPdP dPa, 00000 In0 *-Y wo 00000 04 . , 0 a, c -4 w a, a a, c O 2 Li

44、O U -!-I Ual Lia -A c a -4 -a ac e5 50 OLi am u0 ELi oc, c EU u) mc WE m O E c u)s a, ma Li u4 cd o c -a, 5 OW& u) os Li a,wc, o Li O PI pi rll . (I, aJ 4 4J *rl 3 m U 5 rl O El W O rl O Li -lJ c O U c O .rl c! u 5 a O Li pi (I c Id c O -rl U m u -4 4-1 .rl rl m 5 a Li O I% rl In w . I” - 23 Provide

45、d by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-S-70b82 33 W 9499906 0438023 O W d 8 d E a r M n IL Y a .I+ IZ CVN(V(V Co mmmm m . *bpbpdP bp O000 O * O O000 d . a 4 c (Il c 2 LI O 3 z LI O O pi 24 Provided by IHSNot for ResaleNo reproduction or networ

46、king permitted without license from IHS-,-,-n 2 Y nl 00 w O I- l m I E H MIL-S-70b2 13 W 7799906 0438022 2 rl Id a al e .Pl w aJ a al E R c E .d h E .I4 e di al c a -4 O a ua tn-4 a w Ed Id 0.d o o Q d O ul aJ .d U .FI 3 (D u a rl s! w O rl O Li c, c O u c O .FI U o 5 a O L-i Pi a E (D c O .d c, rd

47、o .d w .FI rl (D 5 a CI Fri rl VI d, aJ aJ m .K e r i 7 5 c) c3 Q W I 25 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-z O H Ei u w PI v) 2 H w u z p: O F z O u w E-i c H 2 a MIL-S-70b82 13 = 7799706 0438023 4 W rl 3.1 rl 11 E a, (o (o 4 rl (d u .r

48、l Li U u a, rl w - Li a, U -4 c tn H Ln rl ni e di . . - rl (d 5 C U rl* d W UN ni- nia mm mm mm . dPdP dP dP O0 o mdP *di did wo . . 1 O0 O0 Orl O m u a, c -4 w a, W a, c O z a a, rllo U Li x (da a c -(o cc Um tnE CY Li 40 3 rl (du U0 O0 BPI d dl 26 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-S-70b82 13 E 77777Ob 0438024 b m rl id u -4 u Ci u al Fi w c u Ci !4 rl “(VOO mmmm o. OOOd a al E .ri u-! al a al E fi w .ri oc 27 Provided by IHSNot for ResaleNo reproduct