ARMY MIL-STD-40051-6 B CHANGE 2-2006 TECHNICAL MANUALS SUPPORTING INFORMATION《辅助信息的技术手册》.pdf

1、 MIL-STD-40051-6B(TM) w/CHANGE 212 MAY 2006 SUPERSEDING MIL-STD-40051-6B(TM) w/CHANGE 130 NOVEMBER 2003 DEPARTMENT OF DEFENSE STANDARD PRACTICE TECHNICAL MANUALS SUPPORTING INFORMATION AMCS A7329 AREA TMSS DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREM

2、ENT SENSTIVE Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-40051-6B(TM) ii CONTENTS PARAGRAPH PAGE 1. SCOPE 1 1.1 Scope1 2. APPLICABLE DOCUMENTS.1 3. DEFINITIONS .1 4. GENERAL REQUIREMENTS1 4.1 General.1 4.2 Maintenance level applicability

3、.1 4.3 Preparation of digital data for electronic delivery .1 4.4 Use of the DTDs / XSLs 1 4.4.1 Page-based TMs.1 4.4.2 Frame-based TMs 2 4.5 Content structure and format .2 4.6 Style and format.2 4.7 Work package development.2 4.8 Selective application and tailoring.2 5. DETAILED REQUIREMENTS.2 5.1

4、 Preparation of supporting information.2 5.2 References work package 2 5.2.1 Scope .2 5.2.2 Publication list .2 5.3 Maintenance allocation chart (MAC) work package (Field level only)3 5.3.1 DELETED3 5.3.2 DELETED3 5.3.2A Introduction for two-level maintenance format MAC work package .3 5.3.2B Introd

5、uction for two-level aviation maintenance format MAC work package .7 5.3.3 MAC work package 13 5.3.3.1 MAC entries.13 5.3.3.2 MAC format.14 5.3.3.3 Tools and test equipment requirements .14 5.3.4 Remarks 15 5.4 RPSTL work package (field and above only) 15 5.5 Components of end item(COEI) and basic i

6、ssue items (BII) lists work package (operator only) 15 5.5.1 Introduction for COEI and BII lists work package .15 5.5.2 COEI list 16 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-40051-6B(TM) iii PARAGRAPH PAGE 5.5.2.1 List 16 5.5.3 BII lis

7、t .16 5.6 AAL work package (operator only) 16 5.6.1 Introduction .17 5.6.2 AAL list .17 5.7 Expendable and durable items list work package .17 5.7.1 Introduction for expendable and durable items list work package .18 5.7.2 Expendable and durable items list .18 5.8 Tool identification list work packa

8、ge (field/AMC level or above only) .18 5.8.1 Introduction for tool identification list work package 19 5.8.2 Tool identification list 19 5.9 Mandatory replacement parts work package (field/AMC level or above only) .19 5.10 Critical safety items (CSI) and flight safety critical aircraft parts (FSCAP)

9、 work package .20 5.10.1 Critical safety items (CSI) .20 5.10.2 Flight safety critical aircraft parts (FSCAP) (aviation only) .20 5.11 Support items work package .30 5.12 Additional work packages .30 6. NOTES30 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from

10、 IHS-,-,-MIL-STD-40051-6B(TM) iv FIGURE PAGE FIGURE 1. Example of an introduction work package 21 FIGURE 2. DELETED22 FIGURE 3. DELETED23 FIGURE 3A. Example of two-level MAC introduction 24 FIGURE 3B. Example of two-level aviation MAC introduction 25 FIGURE 4. DELETED26 FIGURE 5. DELETED27 FIGURE 5A

11、. Example of two-level MAC.28 FIGURE 5B. Example of two-level aviation MAC.29 FIGURE 6. Example of a standard MAC tools and test equipment and remarks tables 30 FIGURE 7. Example of aviation MAC tools and test equipment and remarks tables 31 FIGURE 8. Example of components of end item and basic issu

12、e items lists .32 FIGURE 9. Example of an additional authorization list .35 FIGURE 10. Example of a expendable and durable items list36 FIGURE 11. Example of a tool identification list.37 FIGURE 12. Example of a mandatory replacement parts list.38 FIGURE 13. Example of a flight safety critical aircr

13、aft parts table39 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-40051-6B(TM)11. SCOPE.1.1 Scope. This standard establishes the technical content requirements for the preparation ofsupporting information (previously known as appendixes) for

14、major weapon systems, and theirrelated systems, subsystems, equipment, weapons replacement assemblies (WRAs), and shopreplacement assemblies (SRAs). The requirements are applicable for all maintenance levelsthrough overhaul (depot) including Depot Maintenance Work Requirements (DMWRs) andNational Ma

15、intenance Work Requirements (NMWRs). The requirements can be used to developTMs in a variety of output forms including interactive screen presentations (frame-basedmanuals) and paper (paged-based) manuals.2. APPLICABLE DOCUMENTS.The applicable documents in section 2 of MIL-STD-40051 apply to this Pa

16、rt.3. DEFINITIONS.The definitions in section 3 of MIL-STD-40051 apply to this Part.4. GENERAL REQUIREMENTS.4.1 General. Supporting information shall be prepared for weapon systems, major equipment,components and applicable support and interface equipment. Supporting informationrequirements are inclu

17、ded for the preparation of technical data that supplements the specificoperation and maintenance information contained in the TM. This supplemental informationincludes reference data, general maintenance and parts information and associated illustrations.4.2 Maintenance level applicability. Requirem

18、ents contained in this standard are applicable toall maintenance levels unless specifically noted in bold and in parentheses (i.e., Field).The labeled requirements shall be applicable to all TMs containing that maintenance level. Anexplanation of all applicable Department of Army maintenance levels

19、is provided inMIL-STD-40051, Appendix A.4.3 Preparation of digital data for electronic delivery. Technical manual data prepared anddelivered digitally in accordance with this standard shall be Extensible Markup Language (XML)tagged using the Document Type Definition (DTD) for Supporting Information

20、and the XMLStylesheet Language (XSL) or style sheets in accordance with MIL-STD-2361. Refer toMIL-STD-40051 for information on obtaining or accessing this DTD. XML tags used in themodular DTD are noted throughout the text of this standard in bracketed, bold characters (i.e.,) as a convenience for th

21、e TM author and to ensure that the tags are used correctlywhen developing a document instance.4.4 Use of the DTDs / XSLs.4.4.1 Page-based TMs. The DTDs referenced in this standard interpret the technical content andstructure for the functional requirements contained in this standard and are mandator

22、y for use.The XSLs referenced herein interpret the style and format. As specified by the contractingactivity, XSLs, or style sheets may be used to produce final reproducible paper copy for all TMsprepared in accordance with this standard. For additional information on DTDs and specificXSLs, and styl

23、e sheets, refer to MIL-STD-2361.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-40051-6B(TM)24.4.2Frame-basedTMs.TheDTDreferencedinthisstandardinterpretsthetechnicalcontentandstructureforthefunctionalrequirementscontainedinthisstandardandisma

24、ndatoryforuse.Developmentofframe-basedTMsisaccomplishedthroughtheuseoftheDTDcombinedwiththerequirementscontainedinMIL-PRF-87268.TherequirementscontainedinMIL-PRF-87268applyunlesstheyconflictwiththerequirementsinthisstandard.TherequirementsinthisstandardtakeprecedenceovertherequirementscontainedinMIL

25、-PRF-87268.Astylesheetisusedtointerpretthestyleandformatforframe-basedscreendisplay.ForadditionalinformationonDTDsandspecificXSLsorstylesheets,refertoMIL-STD-2361.4.5Contentstructureandformat.TheexamplesprovidedhereinandinMIL-STD-40051areanaccuraterepresentationofthecontentstructureandformatrequirem

26、entscontainedinthisPartandshallbefollowedtopermittheeffectiveuseoftheDTDforSupportingInformation.4.6Styleandformat.MIL-STD-40051providesstyleandformatrequirementsforthepreparationofbothpage-basedandframe-basedTMs.Theserequirementsareconsideredmandatoryandareintendedforcompliance.4.7Workpackagedevelo

27、pment.Technicalmanualdatadevelopedinaccordancewiththisstandardshallbedividedintoindividual,standaloneunitsofinformationcalledworkpackages.Aworkpackageshallconsistofdescriptive,operational,maintenance,troubleshooting,support,orpartsinformationfortheweaponsystemorequipment.4.8Selectiveapplicationandta

28、iloring.MIL-STD-40051containssomerequirementsthatmaynotbeapplicabletothepreparationofalltechnicalmanuals.SelectiveapplicationandtailoringofrequirementscontainedinMIL-STD-40051aretheresponsibilityoftheacquiringactivityandshallbeaccomplishedusingAppendixA,TechnicalManualContentSelectionMatrixes,ofMIL-

29、STD-40051.Theapplicabilityofsomerequirementsisalsodesignatedbyoneofthefollowingstatements:unlessspecifiedotherwisebytheacquiringactivity;as/whenspecifiedbytheacquiringactivity;orwhenspecifiedbytheacquiringactivity.5.DETAILEDREQUIREMENTS.5.1Prepara tionofsupportinginformation .Supportinginformationsh

30、allbedevelopedasworkpackages.Supportinginformationworkpackagesaredescribedin5.2through5.12.WPsshallincludeWPidentificationinformation.Supportinginformationworkpackagesshallbeplacedinasinglechaptercalled“SupportingInformation”.Forpage-basedTMs,theseworkpackagesshallbeplacedintheTMintheorderinwhichthe

31、yarepresentedherein,asapplicable.SeeMIL-HDBK-1222forexamplesofheaderinformationforsupportinginformationworkpackages.5.2Referencesworkpackage.ThisworkpackageshallbepreparedandlistallpublicationsreferencedintheTMandrequiredbytheusertooperateand/ormaintaintheequipment.Itshallconsistofascopeandpublicati

32、onlist.Initialsetupinformationisnotrequiredforthisworkpackage.5.2.1Scope.Informationconcerningtheuseandcontentofthereferencesworkpackageshallbeprepared.(RefertoFigure1.)5.2.2Publicationlist.Individualparagraphsshallbepreparedforeachpublicationtype.Allrelated/referencedpublications,withtheexceptionof

33、thosepublicationsthatarecurrentlyunpublished,shallbelistedinnumericalorderwithineachpublicationtype.ThislistProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-40051-6B(TM) 3 shall identify the publications by number and title . (Refer to Figure

34、1.) If the publication is non-government, the source shall be given. If a List of Applicable Publications (LOAP) exists, it may be referenced. 5.3 Maintenance allocation chart (MAC) work package (Field level only). The MAC shall be prepared and include an introduction work package and MAC work packa

35、ge. 5.3.1 DELETED. 5.3.2 DELETED. 5.3.2A Introduction for standard two-level maintenance format MAC work package . The following text shall be prepared and included verbatim (refer to Figure 3A). This initial setup information is not required for this work package. “MAINTENANCE ALLOCATION CHART (MAC

36、) INTRODUCTION The Army Maintenance System MAC This introduction provides a general explanation of all maintenance and repair functions authorized at the two maintenance levels under the Two-Level Maintenance System concept. The MAC (immediately following the introduction) designates overall authori

37、ty and responsibility for the performance of maintenance functions on the identified end item or component. The application of the maintenance functions to the end item or component shall be consistent with the capacities and capabilities of the designated maintenance levels, which are shown on the

38、MAC in column (4) as: Field includes three subcolumns, Crew (C), Service (O), and Field (F) maintenance. Sustainment includes two subcolumns, Below Depot Sustainment (H) and Depot (D) The tools and test equipment requirements (immediately following the MAC) list the tools and test equipment (both sp

39、ecial tools and common tool sets) required for each maintenance function as referenced from the MAC. The remarks (immediately following the tools and test equipment requirements) contain supplemental instructions and explanatory notes for a particular maintenance function. Maintenance Functions Main

40、tenance functions are limited to and defined as follows: 1. Inspect. To determine the serviceability of an item by comparing its physical, mechanical, and/or electrical characteristics with established standards through examination (e.g., by sight, sound, or feel). This includes scheduled inspection

41、 and gagings and evaluation of cannon tubes. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-40051-6B(TM) 4 2. Test. To verify serviceability by measuring the mechanical, pneumatic, hydraulic, or electrical characteristics of an item and comp

42、aring those characteristics with prescribed standards on a scheduled basis, i.e., load testing of lift devices and hydrostatic testing of pressure hoses. 3. Service. Operations required periodically to keep an item in proper operating condition; e.g., to clean (includes decontaminate, when required)

43、, to preserve, to drain, to paint, or to replenish fuel, lubricants, chemical fluids, or gases. This includes scheduled exercising and purging of recoil mechanisms. The following are examples of service functions: a. Unpack. To remove from packing box for service or when required for the performance

44、 of maintenance operations. b. Repack. To return item to packing box after service and other maintenance operations. c. Clean. To rid the item of contamination. d. Touch up. To spot paint scratched or blistered surfaces. e. Mark. To restore obliterated identification. 4. Adjust. To maintain or regul

45、ate, within prescribed limits, by bringing into proper position, or by setting the operating characteristics to specified parameters. 5. Align. To adjust specified variable elements of an item to bring about optimum or desired performance. 6. Calibrate. To determine and cause corrections to be made

46、or to be adjusted on instruments of test, measuring, and diagnostic equipment used in precision measurement. Consists of comparisons of two instruments, one of which is a certified standard of known accuracy, to detect and adjust any discrepancy in the accuracy of the instrument being compared. 7. R

47、emove/Install. To remove and install the same item when required to perform service or other maintenance functions. Install may be the act of emplacing, seating, or fixing into position a spare, repair part, or module (component or assembly) in a manner to allow the proper functioning of an equipmen

48、t or system. 8. Paint. To prepare and spray color coats of paint so that the ammunition can be identified and protected. The color indicating primary use is applied, preferably, to the entire exterior surface as the background color of the item. Other markings are to be repainted as original so as t

49、o retain proper ammunition identification. 9. Replace. To remove an unserviceable item and install a serviceable counterpart in its place “Replace” is authorized by the MAC and assigned maintenance level is shown as the third position code of the Source, Maintenance and Recoverability (SMR) code. 10. Repair. The application of maintenance services, incl