ARMY MIL-T-11154 A-1952 TOOL-SET (COMPLETE WITH TOOLS) CARPENTERS' NO 2 (FOR ARMY FIELD OPERATIONS)《木工2号(用于军队野外操作)工具箱(包括工具)》.pdf

1、-:, MIL-T-11154A 27 AUGUST 1952 SUPERSEDING MILT-l1154(QMC) 15 MAY 1951 MILITARY SPECIFICATION TOOL-SET (COMPLETE WITH TOOLS), CARPENTERS NO. 2 (FOR ARMY FIELD OPERATIONS) Thh specification has been approved by the Depart ments of the Ariny, the Naw ad the Air Fwce. 1. SCOPE 1.1 This specification c

2、overs onetype and size and the assembly of a partial set of car- penters tools, to be used where there is a limited requirement for carpenter work for Army field operations. d. APPLICABLE SPECIFICATIONS, STANDARDS, DRAWINGS, AND PUBLI- C ATIONS 2.1 The following specifications and stand- ards, of th

3、e issue in effect on date of invita- tion for bids, form a part of this specifica- tion: SPJCCIFIC ATONS mm Dry-cleaning. NN-B-591 - Boxes, Fiberboard, Wd-Cleated (for Domestic Ship- ment). NN-B-601 - Boxes, Wood-Cleated- Plywood, for Domestic Shipment, NN-B-621 -Boxes, Wood, Nailed and Lock-Corner.

4、 NN-B-631 -Boxea, Wood, Wire- bound, for Domestic Shipment, NN-H-106 -Handles; Wood, MiScel- . laneous (for) Toois. I * 202387-52-4306# . I. QQ-S-781 atrapping, Flat, Steel. GGG-B-461 -Blades ; Hacksaw GGG-(3-311 -Chisels, Gouges, and GGGC-313 -Chisels, Hand Cold (for GGGF-671 Frames ; Hack Saw. GGG

5、H46 -Hammers, Mauls, and GGGH-131 -Hatchets. GGGP-471 -Pliers and Nippers. GGGR-791 Rules. GGGS-61 -Saws. GGGS-121 -Screw Drivera. GGGS-291 -Shears ; Tinners, Bench, GGGS-656 - Squares ; Carpenters, LLL-B-631 - Boxes, Fiber, Corni- LLL-B-636 -Boxes, Fiber, Solid (for (Hand). Slicks ; Woodworkers. Me

6、tal). =-, Sledges. and Hand (Snips). Ne-Makers, and Machinists. gated (for Domestic Shipment) Domestic Shipment). MILITARY JAN-P-105 -Packaging and Packing for Overseas Shipment-Boxes, Wood, Cleated Plywood. , JAN-P-106 -Packaging and Packing for Overseas Shipment-Boxes, Wood, Nailed. -. -. 1- m Pro

7、vided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-LLL54A 51 I 7779706 03bb3 O W MIL=T-lll!%A =B-107 - Boxes, Wood, Wire- Bound (Overseas Type). JAN-P-108 -Packaging and Packing for Overseas ShipmendBoxes, Fiber- board (V-Board and W-Board) Exte- rio

8、r and Interior. MIGP-116 - Preservation, Methods of. JAN-P-120 -Packaging and Packing . for Overseas Shipment - Cartons, Folding, Paperboard. JAN-B-121 - B ar r i e r - Materials, Greaseproof. JAN-P-125 -Packaging and Packing for Overseas Shipment, Barrier-Mate- -. JAN-P-127 -Packaging and Packing f

9、or Overseas Shipment-Tape Adhe- sive, Pressure-Sensitive, Water Resist- ant. . . JAN-P-133 -Packaging and Packing for Overseas ShipmenbBoxes, Set- .Up, Paperboard. any set found not complete, not properly packed and marked, or containing any incorrect and de- fective item shall be rejected. If the n

10、umber of defective tool sets in any sample exceeds the acceptance number of the appropriate. sampling plan of Standard MIGSTD-105, the lot represented by the sample shall be rejected. Rejected lots may be resubmitted provided the contractor has repaired or re- moved all nonconforming tool-sets. 5. P

11、REPARATION FOR DELIVERY 5.1 Preservation. 5.1.1 Domestic and oversea.-All ferrous metal surfaces shall be cleaned with dry- cleaning solvent conforming to Specification P-S-661, thoroughly dried, and immediately coated with preservative specified in Specifi- cation MILP-116, as follows: Chisels, scr

12、ew drivers, squares, ham- ?mers, and similar items (metal parts only) shall be coated with type P-1 preservative. Pliers, nippers, wrenches, saw blades, and similar items shall be coated with type P-6 preservative ; and wrapped separately, or like items together, with greaseproof barrier- . material

13、, grade A, type I, conforming to Specification JAN-B-181. 5.2 Packaging. 5.2.1 Domestic and oversea.-All tools, in- cluding those requiring no preservation, shall be individually packaged in a standard com- mercial folding or Set-up paperboard carton conforming to Specification JAN-P-120 or JAN-P-13

14、3 or wrapped in single-face corru- gated fiberboard, properly identified, and placed in the tool box, Any void space within the tool box shall be filled wjth shredded wax paper. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-5.3 Packing. 5.3.1 For d

15、omestic shipment ar,d storage. -The tool box shall be closed and locked, and the keys wired to the handle of one end with not less than 15-gage annealed wire. The keys shall be further protected by tape, type II, grade C, conforming to Specification JAK- P-127, not less -than 1 inch wide, spirally w

16、ound in such manner as to entirely cover the keys and the wire. The taped keys shall be placed against the handle to provide ade- quate protection. Each tool box shall be strapped with two flat steel straps, mini- mum y8 inch by 0.020 inch, type I, class A, conforming to Specification QQ-S-781, .wit

17、h metal edge protectors placed around the top, sides, and bottom of each tool box. The flat straps shall be placed approximately 5 inches from each end of the tool box. Each tool box shall be individually packed in a wood-cleated- fiberboard, wood-cleated-plywood, nailed wood, wirebound wood, corrug

18、ated fiber or solid fiber box conforming to Specification 631, LLL-B-631 or LLGB-636, respectively. The gross weight of wood boxes shall not exceed approximately 200 pounds. The gross weight of fiberboard boxes shall be subject to the limitation of the box specification. NN-B-591, NN-B-601, NN-B-621

19、, NN-B- 5.3.2 For oversea shipment.-Unless other- wise specified in the contract or order, the subject commodity prepared as described in 5.3.1, except that each tool box shall be in- dividually packed in a cleated-plywood, nailed wood, wirebound, fiberboard, or fiber- Iined wood box conforming to S

20、pecification P-108 or JAN-P-138, respectively. The gross weight of wood boxes shall not exceed ap- proximately 150 pounds ; of fiberboard boxes approximately 70 pounds, JAN-P-105, JAN-P-10 6, MIGB-107, JAN- MIL-T-1 1 154A 5.3.2.1 Contents shall be inclosed within a sealed waterproof bag, or its equi

21、valent, made from material conforming to Specification JA4N-P-125, for caseliner material. Seams and closures shall be sealed with adhesive conforming to Specification MILA-140. 5.4 Marking.-Shipping containers shall be marked in accordance with Standard MIL- STD-129. 6. NOTES 6.1 Ordering data. - P

22、rocurement docu- (a) Title, number, and date of this speci- (b) Sampling and inspection procedures. (c) Whether domestic or oversea pack- (d) Marking for Marine Corps ship- (e) Stock number (see 6.2). ments should specify the following: fiation. ing is required (see 5.2). ments. - 6.2 The Approved Q

23、uartermaster Corps nomenclature and stock number for the com- plete tool-set is as follows : TOOL-SET (COMPLETE WITH TOOLS), CARPENTERS No. 2 Nomenclature and stock numbers for the in- dividual components are listed in 3.1. (Stock NO. 41-T-3527). 6.3 This specification with its complete coverage of

24、the components making up the tool-set, together with the illustrative photo- graphs, is to be used as a guide in procure- ment for the Army and also for assembly of the set in lieu of the information contained in the War Department Supply Catalog QM-6, issue of April 1947. Provided by IHSNot for Res

25、aleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-LLL54A 51 9797906 03bb5 B MIL-T-l1154A Notice.-When Gowrnment drawings, specifications, or other data are used for any purpose other than in connection with a definitely related Goverment pro- curement operation, the Unite

26、d States Government thereby incurs no responsibility nor any obl-igation whatsoever; and the fact that the Government may have formulated, furnished, or in any way supplied the said drawings, specifications, or other data is not to be regarded by implication or otherwise as in any manner licensing t

27、he holder or any other person or corporation, or conveying any rights or permission to manufacture, use, or sell any patented invention that may in any way be related thereto. CusGiians: Army-Quartermaster Corps Navy-Bureau of Ships Other interest: Army-CSigT Navy-S. . Provided by IHSNot for ResaleN

28、o reproduction or networking permitted without license from IHS-,-,-WGum %.-Tool set (wzplete with took) caypentem No. 2. o Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-M 1 L - T - L L I5 4 A B c . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-