ARMY MIL-T-44047 E-1991 TROUSERS CAMOUFLAGE PATTERN COMBAT《战斗伪装型裤》.pdf

1、MIL-T-44047E 26 June 1991- SUPERSEDINiG MIL-T-44047D 14 August 1990 MILITARY SPECIFICATION TRWSERS, PAT“, (XIMBAT This specification is approved for use by all Departmnts and Agencies of the Department of Defensei 1. SCOPE 1.1 Scope. This specification covers camouflage pattern carruat trousers. * 1

2、.2 Classification. sizes as specified (see 6.2): The trousers shall be of the following types and Type I - Woodland camouflage pattern, cotton/nylon twill cloth Typ II - Deleted (see 6.8) Type III - Woodland camouflage pattern, cotton poplin cloth Type IV - Desert camouflage pattern (3 color) cotton

3、/nylon twill cloth Type V - Desert camouflage pattern (3 color) cotton poplin cloth Schedule of sizes x-small small Medium - - X-Short X-Short X-Short Short Short Short Short Short Long X-Long Regular Regular Regular Regular Regular Long - Long X-Long mng Long - X-Long Beneficial cmnents (recmnendat

4、ions, additions, deletions) and any pertinent data whichmay be used in improving this document should be addressed to: Center, Natick, MA 01760-5019 by using the Standaxh zation Documnt Improverent Proposal (DD Form 1426) appearing at the end of this doczrment or by letter. U.S. Army Natick Research

5、, Developnent, and Engineering AMSC N/A Fsc 8415 DISTRI3UTION STATEMENT A. pJ.proved for public release; distribution is unlimited. - Licensed by Information Handling ServicesProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-44047E 84 9999906 048

6、4970 Y MILJT-44047E 2. APPLICABLE r3xumms 2.1 Government documents. 2.1.1 mec ifications, standards and handbmks. The following specifica- tions, standards and haridbooks form a part of this doCunient to the extent specified herein. are those listed in the issue of the Department of Defense Inex of

7、Specifications and Standards (DODISS) and supplement thereto, cited in the Unless otherwise specified, the issues of these documents Slicitation (see 6.2) . SPECIFICATIONS A-A-50083 A-A-50198 A-A-50199 V-B-871 V-T-285 DDD-L-20 PPP-B-636 MILITARY MIL-B-543 MIL-T-5038 MIL-L-35078 MIL-C-4 34 6 8 MIL-T-

8、4 356 6 MIL-C-4403 1 MIL-C-44034 MIL-C-44296 3CANDArn FEDERAL FED-STD-595 FED-STD-751 Bag, Plastic, Folded Garment Thread, Gimp, Cotton, Wlttonhole Thread, Polyester Core, Cotton- or . Button, Sewing Hole, and Button, Staple, (Plastic) Thread, Polyester Label: Boxes, Shipping, Fiberboard Polyester-C

9、overed For Clothing, Fquipage, and Tentage (General Use) Wickles, Tongueless and Web Strap Tape, Textile and Webbing, Textile, Reinforcing, Nylon -cis, Unit: Preparation of Semiperishable Subsistence Items; Clothing, Personal Equiwnt and Equipage; General Specification For - -Cloth, Camouflage Patte

10、rn, Wind Resistant Poplin, Cotton - Tape, Textile, Cotton or Polyester, General Purpose, Natural or in Colors - Cloth, Camouflage Pattern: Woodland, Cotton and Nylon - Cloth, mill, Camouflage Pattern, Cotton and Nylon or Desert Uniform - Cloth, Fusibles - Colors Usa in Government Pr0C;urement - Stit

11、ches, Seams, and Stitchings 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-44047E 84 9979906 0484973 b M MIL-T-4 4 04 7E MILITARY MIL-SrID-105 - -ling Procedures and Tables for Inspection by Attributes MIL-SIP129 - Marking for Shipnent and S

12、torage MIL-sm)-147 - Palletized Unit Imds MIL-STD-731 - Quality of Wood Members for Containers and Pallets MIL-SID-1488 - Provisions for Evaluating Quality of Trousers (Unless otherwise indicated, copies of federal and military spec=ifications, standards and handbooks are available fmm the Sm zation

13、 Documnix order Desk, wiilding 4D, 700 Robbins Avenue, Philadelphia, PA 1911-5094.) 2.2 Non-Goverriment publications. The following documents form a part of Unless otherwise specified, this document to the extent specified herein. Unless otherwise specified, the issues of the documents which are DOD

14、 adopted are those listed in the issue of the DODISS cited in the solicitation. the issues of documents not listed in the DODISS are the issues of the dcx;uments cited in the solicitation (see 6.2). AMERICAN s0CIE;Ty FOR TESTING AND MATERu.LLs (ASIM) D 3951 - Standard Practice for Comriercial Packag

15、ing (Application for copies should be addressed to the American Society for (Non-Goverrrment standards and other publications are normally available Testing and Materials, 1916 Race Street, Philadelphia, PA 19103-1187.) fmm organizations that prepare or distribute the documents. also my be available

16、 in or through libraries or other infomtional services. ) this doCunient and the references cited herein, the text of this docuwnt takes precedence. laws and regulations unless a specific exemption has been obtained. These documents 2.3 order of precedence. In the event of a conflict between the tex

17、t of Nothing in this document, hawever, supersedes applicable 3. REQuIlENmrs 3.1 First article, When specified (see 6.2), a sample shall be subjected to first article inspection (see 6.3) in accordance with 4.3. information to the contractor (see 6.4). may appear in the sample, in which case this sp

18、ecification shall govern. 3.2 Guide sample. Samples, when furnished, are solely for guidance and Variation fmm this specification 3.3 Materials. It is encouraged that recycled material be used when practical as long as it meets the requirements of this specification. 3 Provided by IHSNot for ResaleN

19、o reproduction or networking permitted without license from IHS-,-,-MIL-T-44047E 84 m 9999906 0484972 8 m MIL-T-44047E 3.3.1 Basic material. 3.3.1.1 “we I trousers. The basic material shall be cotton/nylon twill cloth printed in a woodland camouflage pattern conforming to class 1 of MIL-C-44031. 3.3

20、.1.2 JAW? III trousers. The basic material shall be cotton poplin printed in a woodland camouflage pattern conforming to type III of MIL-C-43468 * 3.3.1.3 Tvpe IV trousers. The basic material shall be cotton/nylon twill cloth printed in a desert eamouflage pattern (3 color) conforming to.class 3 * 3

21、.3.1.4 Tvpe V trousers. printed.in a desert camouflage pattern (3 color) conforming to type V of MIL-C-43468. * 3.3.2 Cloth, side and hip hanqinq 1xx: kets, waistband lininq, riqht flv lininq, left flv, carqo pocket facinq and protective flap (tvpe III) only. The cloth for side and hip hanging pocke

22、ts, waistband lining, right fly lining, left fly (buttonhole fly and lining), cargo pocket facings and protective flap (type III only) shall be basic material, ground shade cloth, or printed seconds cloth. class 1 of MIL-C-44031 for type I trousers, type III of MIL-C-43468 for type III trousers, cla

23、ss 3 of MIL-C-44034 for type IV trousers and type V of MIL-C-43468 for type V trousers prior to overprinting of the respective camouflage patterns. finished fabrics physical, mechanical, and dimensional requirements. Printed seconds shall be cloth which has been rejected only for defects pertaining

24、to color, infrared reflectance, or camouflage printed patterns, as specified in MIL-C-44031 for type I trousers, MIL-C-43468 for types III and type V trousers and MIL*-44034 for type IV trousers. interlining the pocket flaps of the type I, III and V trousers shall conform to bonding strength and typ

25、e V, class 3, adhesive dot application style B of MIL-C-44296. of MIL-C-44034. The basic material shall be cotton poplin The ground shade cloth shall be dyed conforming to The ground shade cloth shall- mt the respective 3.3.3 Cloth, fusible, interlininq 1xx: ket flaw. The material for 3,3.3.1 Fusinq

26、 press omratinu prxedure and conditions. Fuse a single layer of fusible interlining to a single layer of basic material on a dry electrically heated fusing press which has the capacity of controlling and retaining pressure, dwell time, and temperature for a minimum of 8 hours. Pair or sandwich fusin

27、g which can create differential shrinkage, and uneven bonding shall not be permitted. A steam sourced fusing press shall not be allawed for any initial fusing operations. material manufacturers recomnendations for fusing dwell tim?, pressure, and temperature, based upn the fusing equipnt used and ba

28、sic material being fused, shall be utilized. The temperature used in fusing shall not exceed For optimum results, the fusible 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-4447E 84 m 9999906 0484973 T m MIL-44047E 340% and shall not cause a

29、n objectionable color change or staining of the basic fabric. including a fusing press information chart, shall be required to ensure proper fusing press performance relative to temperature control, evenness in pressure head or roller contact, dwell tim, cleanliness, and bonding strength, plies of m

30、aterial show no sign of bubbling or delamination initially or after 3 launderings when tested as specified in 4.4.3.4. Results of the production maintenance procedures shall be recorded on figure 2. Basic preproduction and production maintenance procedures, The fusing process will be controlled to a

31、ssure that the fused 3.3.4 Tape, textile, cotton. The taps for the adjustmnt straps shall be 5/8 inch wide, Camouflage Green 483 for type I and III trousers and dyed Tan 380 for types IV and V trousers, conforming to type I, class 3 of MIL-T-43566, except that the colorfastness to crocking and accel

32、erated weathering shall not apply. 3.3.5 Tape, textile, nylon. The tapes for the leg bottanr; shall be 3/8 inch wide, dyed Camouflage Green 483 for type I and III trousers and Tan 380 for types IV and V trousers conforming to type III of MIL-5038, except that the physical requirements for lateral cu

33、rvature shall not apply. 3.3.6 Buttons. The buttons shall confonnto type II, class D, style 26, 30-line of V-B-871. be shade Olive Green EP Cable 62016 for type I and III trousers and Tan AJ Cable 62028 for types IV and V trousers. The buttons shall have a dull finish and the color shall 3.3.7 Threa

34、d and simp. 3.3.7.1 Thread. The thread for seaming and stitching the trousers shall . be polyester- or cotton-covered polyester core thread, ticket Nos. 30, 2 or 3 ply; 50, 2 ply; or 70, 2 ply conforming to A-A-50199. Camouflage Green 483 approximating Color Chip 34094 of FED-STD-595 for type I anci

35、 III trousers and Khaki P-1 C.A. 66019 for types IV and V trousers. Ac an alternate, polyester thread conforming to type IV or V of V-T-285, size 40 may be substituted for sizes 50 and 70 of A-A-50199 thread and size 60 may be substituted for size 30 of A-A-50199. The color shall be 3.3.7.2 Gimp. Th

36、e cotton gimp for reinforcing buttonholes shall conform The color of the gimp shall to type I or II, ticket nuniber 8 of A-A-50198. be Camouflage Green 483 approximating Color Chip 34094 of FED-STD-595 for types I and III and Khaki P-1, Cable No. 66019 for types IV and V. laundering equal to or bett

37、er than the standard sample. sample is available, the dyed thread and gimp shall show llgood“ fastness to laundering. 3.3.7.3 Colorfastness. The dyed thread and gimp shall show fastness to When no standard 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IH

38、S-,-,-MIL-T-44047E 84 9 9999906 0484974 II W MIL-T-44 04 7E * 3.3.8 Labels. Each trouser shall have-a size label, and an identification label and ah instru COMBAT; type III trousers shall be titled: TRCXJSERS, HOT WEATHER, WOODLAND GNXFLEE PA!I“; COMBAT; type IV trousers shall be titled: TRWSERS, DE

39、SEIIT PATTERN (3 COLDR), c(=brlBAT; and type V trousers shall be titled: TRSERS, i-KYI WEATHEX, DESERT YMWLNX PATIERN (3 COLLIR), COMBAT. label. for all four types of trousers shall conform to class 3, containing the following information: The instruction label for type I trousers The 1. Adjust wais

40、t size by straps on waistband. 2. Blouse trouser outside of boots. 3. Machine washing. Use Permanent Press Cycle. Wash in warm water with mild detergent. 4. Hand washinq. Wash in warm water using mild detergent. D N(Tr WRING OR ?wIST. Rinse in clean warm water. 5. Do N(Tr USE EEEACH OR STARCH. 6. rm

41、n temperature for 10 minutes. Remove imnediately fram dryer. To drip dry, remove from water and place on rust-proof hanger. Dry at law heat (do not exceed 1309). After drying, tumble at 3.3.8.4 Combination identification and instruction label. The identifica- tion label (class 1) and the instruction

42、 label (class 3) may be combined into one label. The combination shall conform to the requirements of the class 15 label. 3.3.9 Wickles. The buckles for waist adjustment straps shall be tongue- less, 2-bar conforming to type II, class 3, style 3, 5/8 inch of MIL-B-543. * 3.4 Desicm. pockets with fla

43、ps, side hanging pockets, right and left leg cargo pockets with flaps, seat patches (types I, III and V), knee patches with front hee action pleats (types I, III and V), and leg hem drawtapes. 3.5 Figures, Figures 1, 2 and 3 are furnished for information only. If there are inconsistencies between th

44、e written doc=ument and the figures, the written document shall control. The trousers shall have a buttonhole fly, right and left hip 3.6 Patterns. Standard patterns, which provide a seam allowance of 1/2 inch for outseam, seat seams, crotch seams and inseams, 1/4 inch allowance for hip pocket flaps

45、 and tabs and 3/8 inch allowance for all other seams, 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-44047E 84 m 9999906 0484977 7 m E(IIL-T-44047E except where otherwise specified, will be fdshed by the Govenrment. Standard patterns shall n

46、ot be altered in anyway and are to be used only as a guide for cutting the contractors working patterns. The working patterns shall be identical to the standard patterns. Minor niodifications are permitted where necessarywhen using autcanatic equipnent. modifications shall not alter the dimensionalr

47、 serviceability, or appearance requirements cited in the specification. * 3.6.1 List of patteni parts The component parts of the trousers shall be cut franmterials specified in accordance with the pattern parts indicated in table I. These TABIiE I. List of pattern parts cut parts 2 2 2 2 3 2 2 2 2 2

48、 2 2 2 2 2 Material Nomenclature Cotton/nylon cloth or Front i/ cotton poplin Back i/ Side hanging pocket bearer i/ Side hanging pocket facing J/ ieft fly (buttonhole fly and lining) i/ Hip pocket facing Hip pocket bearer Hip pocket flap Hip pocket flap tab Hip pocket flap and tab (one-piece) 21 Sea

49、t patches (types I, III and V) Cargo pocket flap Cargo pocket flap tab Cargo pocket flap and tab (one-piece) 2/ Knee patch (types I, III and V) Cargo pocket 2 Cotton/nylon cloth or cotton poplin (ground shade or printing second, see 3.3.2) Fusible interlining trousers only) (types I, III andv 2 1 2 1 2 2 2 Side hanging pocket L/ Right fly lining i/ Cargo pocket facing 3/ Protective flap (type III only) Hip pocket flap