ARMY MIL-T-46365-1962 TELESCOPES ELBOW M92D AND M92F《M92D和M92F型曲折望远镜》.pdf

1、MIL-T-LIb365 12 777770b 0333509 7 . 20 DECEMBER 1962 MILITARY SPECIFICATION TELESCOPES, ELBOW: M92D AND M92F 1. -. SCOPE 1.1 This specification. covers Elbow Tele- scopes M92D and M92F u None defined. . . . . cost and application of the product to .be inspected, the Government shall be expedi- tious

2、ly advised in order that necessary ap- propriate action can be taken. Requirement Q.A. paragraph paragraph Tmt method 3.8.1 4.8.2.1 Special Testing Equipment (STE) 3.8.2 4.8.2.2 STE 3.8.3 4.8.2.3 Standard Meas. Equipment (ME) 3.8.4 4.8.2.4 STEViSual 3.8.6 4.8.2.6 Visual 3.8.6 4.e.2.6 SME 3.9 4.8.3 v

3、ial 3.10 4.8.4 Visual 4.7 Acceptance inspection. ?fejor: AQL 4.0 percent defective 101. Storage temperatures., . 102. Vibration 103. Cleanliness 104. Sealing 4.7.1 Classijfmtm of defects. The classifi- cation of defects in tables I and II shall constitute the minimum inspection require- ments to be

4、performed prior to acceptance or rejection by lots. The AQL specified pertains to each individual characteristic. Samples selected for acceptance inspection listed under table II shall include .those samples used for acceptance inspection speci- fied in table I. Requtrement 8.A. paregraph paragraph

5、Test method 3.5.1 4.8.1.1 special Testing Equipment (STE) 3.6 4.8.1.3 Specification MIGO-13830 3.7 4.8.1.4 Standard Meas. Equipment (ShIE) 3.5.2 4.6.1.2 STE 4.7.1.1 Dkposthn of rejected lots. Re- jected lots shall be screened for all defective characteristics. After corrections have been made and th

6、e Governinent inspector in- formed of the corrective action taken, the lots shall be resubmitted for acceptance as outlined in Standard MILSTD-105. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-4.8 Test methods and procedures. 4.8.1 Envimnmental.

7、 - -. 4.8.1.1 StoTage temperatures. This one extremity of the horizontal reticle line shall be coincident to the target line. The angle subtended by the other extremity of the MILT46365 (MU) horizontal reticle line shall be parallel to the horizontal geometric axis within the limits specified in 3.8

8、.2 as measured on the target. l.4.8.2.3 Eyepiece fomEye and the fact that the Government may have formulated, furnished or in any way supplied the said drawings, specifications or other data is not to be regarded by implication or otherwise aa in any manner licensing the holder or any other person o

9、r corporation or conveying any rights or permission to manufacture, use, or sell any invention that may in any way be related thereto. Preparing activity: custodian: Army-MU Army-MU Project No. 124+A168Y * O.S. QOVERNMENT PRIHTINQ OFFICE: 1089-651048/1070 n Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-