ARMY MIL-T-62079 E-1989 TRUCK PANEL POLICE PATROL CONVERSION 8 000 POUNDS GVW 4X2 COMMERCIAL《GVW为8000磅 规格为4X2 警察巡逻用商用递送车》.pdf

1、- i+ MIL-T-62077E 23 7777906 0200LI53 L Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: US Army Tank-Automotive Command, ATTN: AMSTA-UED, Warren, MI 48397-5000, by using the self-addressed Stand

2、ardization ;Document Improvement Proposal (DD Form 1426) appearing at the end of . i 1 NOT MEASUREMENT SENSITIVE 1 MIL-T-62079E 15 Auwst 1989 SUPERSEDING MIL-T-620 7 9D 14 July 1983 Pf IL ITARY SPEC IF ICATION TRUCK, PANEL : POLICE PATROL CONVERSION, 8,000 POUNDS GVW, 4x2, COMMERCIAL This specificat

3、ion is approved for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This specification covers a gasoline engine driven, four-wheel, two-rear wheel drive, forward control type, commercial panel or window van truck converted to a police patrol wagon with a rear co

4、mpartment for confined occupants. (GVW) of 8,000 pounds. Vehicles procured under this specification are commercial items which are warranted by the manufacturer as specified in acquisition documents. The vehicles have a minimum gross vehicle weight 2. APPLICABLE DOCUMENTS * 2.1 Government documents.

5、 * 2.1.1 Specifications. standards. an d handbooks. The following specifications and standards form a part of this specification to the extent specif ied herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specificatio

6、ns and Standards (DODISS), and supplement thereto, cited in the solicitation (see 6.2). SPECIFICATIONS FEDERAL W-B-13 1 * ZZ-T-381 - Battery, Storage: Vehicular, Ignition, - Tires, Pneumatic, Vehicular (Highway) Lighting, and Starting. DISTRIBUTION STATEMENT.A. Approved for public release; distribut

7、ion is Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-62077E 23 m 7777906 0200454 3 m c MIL-T-620 79E * ZZ-T-381 - Tires, Pneumatic, Vehicular (Highway) . MIL I TARY MIL-B-46176 - Brake Fluid, Silicone, Automotive All - Weather, Operational an

8、d Preservative. STANDARDS FEDERAL * FED-STD-297 - Rustproof ing of Commercial (Nontactical) Vehicles. MILITARY MIL-STD-1223 - Nontactical Wheeled Vehicles Treatment, Painting, Identification Marking and Data Plate Standards. - Light, Warning, Vehicular, Rotating, D.C. MS513 17 DRAWINGS ARMY 7261674

9、7722352 - Cover, with Chain, Radio Receptacle, - Radio Receptacle Assembly. As s emb 1 y e * (Unless otherwise indicated, copies of federal and military specifications, standards, and handbooks are available from the Naval Publications and Forms Center, (ATTN: NPODS), 5801 Tabor Avenue, Philadelphia

10、, PA 19120-5099). 2.1.2 Other Government documents. drawinpc a nd publicat ions. The following other Government documents, drawings and publications form a part of this document to the extent specified herein. the issues are those cited in the solicitation. Unless otherwise specified, DODISS - Depar

11、tment of Defense Index of Specifications and Standards. (Copies of the DODISS are available on a yearly subscription basis either from the Government Printing Office for hard copy, or microfiche copies are available from the Director, Navy Publication and Printing Service Office, 700 Robbins Avenue,

12、 Philadelphia, PA 19111-5093). DEPARTMENT OF TRANSPORTATION (DOT) Federal Motor Carrier Safety Regulations. Federal Motor Vehicle Safety Standards. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-i MIL-T-62077E 23 = 7777906 0200455 5 MIL-T-62079E *

13、 Federal Regulations, 49 CFR, and the Federal Register and should be addressed to the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402.) (Application for copies of DOT publications should reference the Code of ENVIRONMENTAL PROTECTION AGENCY (EPA) Control of Air P

14、ollution from New Motor Vehicles and New Motor Vehicle Engines. (Application for copies of EPA publications should reference the Code of Federal Regulations 40 CFR and the Federal Register and should be addressed to the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 2

15、0402.) (Copies of specifications, standards and other Government documents required by contractors in connection with specific acquisition functions should be obtained from the contracting activity or as directed by the contracting officer. ) * 2.2 Non-Government Dublications. The following document

16、s form a part of this document to the extent specified herein. Unless otherwise specified, the issues of the documents which are DOD adopted are those listed in the issue of the DODISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the DODISS are the iss

17、ues of the documents cited in the solicitation (see 6.2). SAE, INC. SAE Standards and Recommended Practices 553 7 - Storage Batteries. 5551 - Performance Levels and Methods of Measurement of Electromagnetic Radiation from Vehicles and Devices (30-1000 MHz). - Engine Power Test Code - Spark Ignition

18、and Diesel. 51349 (Application for copies of SAE publications should be addressed to SAE, Inc. , 400 Commonwealth Drive, Warrendale, PA 15096.) THE TIRE AND RIM ASSOCIATION, INC. Year Book. (Application for copies of Tire and Rim Association publications should be addressed to the Tire and Rim Assoc

19、iation, Inc., 3200 W. Market Street, Akron, OH 44313.) (Non-Government standards and other publications are normally available from the organizations that prepare or distribute the documents. These documents also may be available in or through libraries or other informational services) -. 3 Provided

20、 by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-b2077E 23 W 779770b 0200456 7 W c MIL-T-6207 9E * 2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited herein, the text of this document takes pre

21、cedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS * 3.1 Standard vehicle and accessories. Except as specified in 3.1.1 through 3.1.1.4, the vehicle, components, assemblies and accessories to be delive

22、red under the contract shall be standard or optional items, which meet or exceed the requirements of this specification. All chassis items shall be as represented in the chassis manufacturers technical data book. Special bodies or mounted equipment shall be as represented in the body and equipment m

23、anufacturers technical data. Technical data shall be limited to specifications and technical-material identical to that furnished to the authorized company representatives for selection of vehicle models and components, and shall be available to the engineering offices of the procuring activity prio

24、r to delivery of the items. The chassis model furnished shall be not older than the chassis manufacturers current model on the date of invitation for bids. 3.1.1 Special requirements. In addition to the standard vehicle and components specified in 3 .l, the vehicle shall be furnished with special eq

25、uipment as specified herein. * 3.1.1.1 Painting and marking. Treatment, painting, marking and data plates shall be in accordance with MIL-STD-1223. The exterior color and the identification markings shall be in accordance with MIL-STD-1223 for the military service identified by the procuring activit

26、y (see 6.2). specified (see 6.21, concealed markings shall be furnished. When * 3.1.1.2 Rustproofing. When specified (see 6.21, the vehicle shall be rustproofed in accordance with FED-STD-297. When specified (see 6.21, tropical rustproofing in accordance with FED-STD-297 shall be provided. 3.1.1.3 S

27、ilicone brake fluid. When specified (see 6.21, and if available as the manufacturers standard or optional brake fluid, silicone brake fluid conforming to MIL-B-46176 shall be provided in the hydraulic brake system. A tag shall be placed near the master cylinder stating “CAUTION: USE SILICONE BRAKE F

28、LUID ONLY, MIL-B-46176.“ 3.1.1.4 Brake liehts. At least one pair of brake lights shall override the four-way emergency flasher. Modifications to the manufacturers standard product to accommodate this requirement shall not compromise conformance to any Federal Motor Carrier Safety Regulation referenc

29、ed herein or to any Federal Motor Vehicle Safety Standard. If additional lights are added to the vehicle, the lights shall be selected from the chassis manufacuters standard matching hardware. 4 - a a I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,

30、-MIL-T-62079E 23 = 9999906 0200Lt57 9 W MIL-T-62079E 3.2 General desia. 3.2.1 Federal Motor Vehicle Safetv Standards. The vehicle and furnished accessories shall comply with all Federal Motor Vehicle Safety Standards in effect on the date of manufacture. 3.2.2 Air Dollution control. The vehicle shal

31、l comply with EPA Regulations governing Control of Air Pollution from New Motor Vehicles and New Motor Vehicle Engines in effect on the date of manufacture. In addition, vehicles destined for California shall comply with State of California regulations governing air pollution control in effect on th

32、e date of manufacture. 3.2.3 Sound level. The interior sound level shall conform to Federal Motor Carrier Safety Regulation 393.94. 3.2.4 Curb weight. The curb weight shall include the weight of the chassis and cab, with all attachments, accessories and equipment; body and full complement of fuel, l

33、ubricants and coolant. * 3.2.5 Gross vehicle weieht. The gross vehicle weight (GVW) shall consist of curb weight, driver and assistant driver weight (computed at 175 pounds each), and a payload of not less than 2,000 pounds distributed evenly over the vehicle load area to provide not less than 8,000

34、 pounds GVW. 3.2.6 Ratines. Vehicle and component ratings shall be the manufacturers published ratings. Vehicular and component ratings shall not be raised to meet the requirements of this specification. When published ratings are not available, verification of ratings shall be available to the engi

35、neering off ice of the procuring activity. 3.2.7 Wheelbase. The wheelbase shall be not less than 123 inches. * 3.2.8 Accessibility. The design of the vehicle and optional equipment shall permit access for routine servicing and shall permit access for replacement and adjustment of component parts and

36、 accessories with minimal disturbance of other components and systems. * 3.2.9 Asbestos. Asbestos materials shall not be used in any form in any part of the vehicle. 3.3 Performance. 3.3.1 Sveeds and vradeabilitv. The vehicle shall maintain a high speed of not less than 58 miles per hour (mph) on sm

37、ooth, approximately level, hard surfaced roads. The vehicle shall be capable of ascending grades of at least 20 percent in low speed range. Speed and gradeabili-ty requirements shall be * met with the vehicle loaded to specified GVW. 5 Provided by IHSNot for ResaleNo reproduction or networking permi

38、tted without license from IHS-,-,-MIL-T-62077E 23 m 9997906 0200458 O W MIL-T-62079E 3.3-2 Service brakee. The service brakes shall control and hold the vehicle, when loaded to its specified GVW, on a 30 percent grade. service brakes shall stop the vehicle, loaded to the specified GVW, within the st

39、opping distance requirements of Federal Motor Carrier Safety Regulation 393.52. The 3.3.3 Parkin? brakes. A hand or foot actuated parking brake shall be furnished in addition to the service brakes. When a foot actuated parking brake is furnished, a hand lever shall be furnished to release the parkin

40、g brake. loaded to the specified GVW on a 30 percent grade. The vehicle parking brake shall be capable of holding the vehicle 3.4 Chassis componente. * 3.4.1 Enpine. The engine shall be a liquid cooled, internal combustion, four-stroke cycle, gasoline type, with not less than six cylinders. The engi

41、ne shall develop not less than 110 net brake horsepower at the manufacturers recommended governed speed. shall be in accordance with SAE 51349. specified horsepower when operated on unleaded fuel with a research octane rating of 91. fuel. overseas use shall be capable of accepting and operating on l

42、eaded gasoline. The engine net horsepower rating The engine shall develop the The engine shall be capable of warranted operation on unleaded Unless otherwise specified or required by foreign laws, vehicles for * 3.4.1.1 Oil filter. A full flow oil filter shall be furnished. * 3.4.1.2 Cooling svstem.

43、 The cooling system shall maintain engine coolant at a temperature below the boiling point with the vehicle loaded to rated GVW and operated at an altitude of 10,000 feet above sea level or in an ambient air temperature of not less than 125 degrees Fahrenheit (OF). A coolant level indicator consisti

44、ng of an unbreakable translucent reservoir shall be provided in a position readily visible for checking the coolant level. system. The translucent reservoir shall be part of the coolant recovery * 3.4.1.3 Coolant temDerature control. Thermostatic control of engine coolant temperature shall be provid

45、ed, * 3,4.1.4 Fan clutch. A fan clutch shall be provided. The fan clutch shall reduce the fan speed automatically when the fan is not required for engine cooling. The fan clutch shall be asbestos free. 3.4.1.5 Power Dlant heaters. When specified (see 6.21, coolant and battery heaters shall be provid

46、ed. The heaters shall operate on 110-volts alternating current (ac), and shall be wired through a junction block, including a fuse or a circuit breaker, to a single three pronged (male), weatherproof, slave receptacle for receiving external power and grounding the vehicle. A three wire connecting ca

47、ble, 25 feet long and of adequate line 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I MIL-T-62077E 23 m 7997906 O200459 2 W MIL-T-62079E capacity to supply power for the heater units simultaneously, shall be furnished. the vehicle end and a stan

48、dard, three pronged (two power plus one ground) male connector at the other end. All electrical apparatus shall conform to Federal Motor Carrier Safety Regulation 393.77()(7). Electrical insulation of connecting cable shall withstand normal operating stresses in low ambient air temperatures (down to

49、 minus 60F) without cracking or loss of dielectric capacity. All heater lead wires shall be installed without interfering with vehicle component operation and without loose excess wire. A carrier for the connecting cable shall be mounted within the cab or engine compartment and shall provide positive cable retention during vehicle operation. Heaters shall be furnished as follows: The connecting cable shall include a matching female connector at (a) A coolan