ARMY MIL-T-63264-1978 TEST SET ELECTRONIC SYSTEMS M92《M92电子系统测试装置》.pdf

1、MILITARY SPECIFICATION TEST SET, ELECTRONIC SYSTEMS: M92 This specification is approved for use by the U.S. Army Armament Research and Development Command, and is available for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 This specification covers the performance an

2、d accept- M92 associated with the M-130 Aircraft General ance inspection requirements for the Test Set, Electronic Systems: Purpose Dispenser. 2. APPLICABLE DOCUMENTS 2.1 The following documents of issue in effect on date of invitation for bids or request for proposal, form a part of this specificat

3、ion to the extent specified herein, SPECIFICATIONS MILITARY MIL-S-45743 - Soldering, Manual Type, High MIL-S-46844 MIL-A-48078 - Ammunition, Standard Quality Reliability, Electronic Equipment - Solder Bath Soldering of Printed Wiring Assemblies, Automatic Machine Type Assurance Provisions, General S

4、pecification For STANDARDS MILITARY MIL-STD-105 - Sampling Procedures and Tables for Inspection by Attributes MIL-STD-331 - Fuze and Fuze Components, Environ- mental and Performance Tests For FSC: 4925 Beneficial commenta (recommendations, additions, deletions) and any pertinent data which may.be of

5、 um in improving this document should be addressed to: Commander, US Army Armament Reaearch and Development Command, Attn. DRDARQA, Dover, New Jersey 07801 by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. Pro

6、vided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-63264 47 W 7979706 Oq44028 O W f -c L-T- 63264(AR) MIL-STD-810 - Environmental Test Fethods MIL-STD-1169 - Packaging, Packing and Marking for Shipment of Inert Ammunition Components DRAWINGS (see 6.5

7、) U.S. ARMY ARMAMENT RESEARCH AND DEVELOPMENT COMMAND PRODUCT AND PACKAGE DRAWINGS 9325901 - Test Set, Electronic Systems: M92 9327670 - Packing and Marking for Box Exterior for Test Set, Electronic Systems: M92 INSPECTION EQUIPMENT DRAWINGS 9272533 - Dispenser Control Panel Assembly 9311431 - Elect

8、ronics Module Assembly 9311434 - Dispenser Assembly (Copies of specifications, standards, drawings and publications required by suppliers in connection with specific procurement functions should be obtained from the rocuring activity or as directed by the Contracting Officer P . 2.2 Other publicatio

9、ns. - The following documents form a part of this specification to the extent specified herein, Unless otherwise indicated, the issue in effect on the date of invitation for bids or request for proposal shall apply, COPE OF FEDERAL REGULATIONS Title 49 - Transportation, Parts 100-199 (The Code of Fe

10、deral Regulations is available from the Super- intendent of Documents, U.S. Government Printing Officer, Washington, D.C. 20402. Orders should specify, “49 CFR 100-199 (latest revision)“). 3. REQUIREMENTS 3;1 Materials. - Materials shall be in accordance with 3.2 Components and assemblies, - The com

11、ponents and assem- the applicable drawings and specifications, blies shall comply with all requirements specified on drawing 9325900 and associated drawings and with all requirements specified in applicable specifications and standards, Provided by IHSNot for ResaleNo reproduction or networking perm

12、itted without license from IHS-,-,-3.3 Performance, - The M92 Test Set shall perform as specified herein. See Functional Test, L,L3.1. 3.4 Environmental requirements, - The test methods in the following subparagraphs are contained in MIL-STD-810, except for temperature humidity which is contained in

13、 EIL- STD- 331. 3.4.1 Transportation vibration, - The M92 Test Set shall perform all functions satistactoriry after being subjected to Method 514.2, Procedure X, 3.4.2 Temperature humidity. - The M92 Test Set shall perform all iunctions satisfactorily after being subjected to Test 105.1 of MIL-STD-3

14、31. (Two fourteen day cycles shBll be completed for a total test pgriod of 28 days except -65 F shall be used in lieu of -80 F for storage temperature.) cables, connectors, components and assemblies shall be per- formed in a thorough, workmanlike manner in accordance with MIL-STD-1400, except that p

15、ara. 4.1.3 does not apply. 3.6 First article inspection, - This specification contains technical provisions for first article inspection, Requirements for the submission of first article samples by the contractor shall be specified in the contract. 3.5 Wiring and soldering. - Soldering of electrical

16、 wires , 3.7 Workmanshi - All parts and assemblies shall be fabri- cated and&; a thorough workmanlike manner, and all manufacturing, processing, and assembly operations shall be correctly perforned, They shall be clean and free of burrs, sharp edges, unblended radii, surface defects , chip;, dirt, g

17、rease and oil (except where specifically required products and other foreign matter. The cleaning method used shall not be injurious to any part or assembly nor shall they be contaminated by the cleaning agent. Exterior surface coatings shall be con.tinuous except for a few light scratches not expos

18、ing base material. neat and sharply defined, corrosion All required markings shall be Required packing shall be dry. . 4. QUALITY ASSURANCE PROVISIONS 4.1 Responsibility for inspection and standard quality assurance provisions, - Unless otherwise specified herein or in the contract, the provisions o

19、f MIL-A-48078 shall apply and are hereby made a part of this detail specification, 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-632b4 47 977970b 0444030 7 M MIL-T-63264(AR) 4.2 Classification of inspection, - The following types of inspect

20、ion shall be conducted on this item. a. First Article Inspection b, Quality Conformance Inspection 4.3 First article inspection 4.3.1 Submission, - The contractor shall submit a first article sample as designated by the Contracting Officer for evaluation in accordance with provisions of 4.3, 2 and 4

21、.3.3. The first article sample shall consist of the items in sample quantities as indicated in Table 1. 4.3.2 Inspections to be performed, - See MIL-A-48078 and paras 4.4.2.1 thru 4.4.2.14, testing per para. 4.4.3 and Table I specified herein. 4.3.3 Rejection. - See MIL-A-48078. 4 Provided by IHSNot

22、 for ResaleNo reproduction or networking permitted without license from IHS-,-,-F L O 7 E 5 Cu m E v c, v) h v U E O L c, u al w C al v) El .I- F .) 3 e e U al a L E O C E *I- m .I- 5 x w 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-63264

23、q7 W 9777706 0444032 2 W MIL-T-63264(A.R) 5 4.4 Quality conformance inspection 4.4.1 Inspection lot formation. - inspection lots shall comply with the lot formation provisions of MIL-A-43078. 4.4.2 Examination. - (See MIL-A-48078). Unless otherwise specified in the classification of defects and test

24、 tables. sampling plans for major and minor defects shall be in accrdance with MIL-STD-105, Inspection Level II. Equipment necessary for the performance of the inspections listed shall be in accordance with 4.4.4. il 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without lice

25、nse from IHS-,-,-.W 1 P MIL- T-63264 (AR) Test Set Tes ter For M92 Test Set VDC Pwr Supply J1 I -A i 1 f I El4 I 931 1431 m. . lp31p3 I Jll ilJi1434 , 1 Breech Plate FIGURE 1 26 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-VIL-T-632bY 47 m- 979990

26、b 0994053 T MIL- 63264 (AR) TEST # 2 Test Set Tester For M92 Test Set L I ri=P to +28 VDC I J2 I wup Power CA # 1 9 325989 Test CA # 1 9325991 133 M92 Test Set 9 32590 1 Test CA # 2 9325992 DCP I 9272533 I mp3L“ 931 1431 I: 1 931 1434 Breech Plate Base Plate I Disp, Test kdapter 932621 1 I J1 P2 t F

27、lare Simulator I -Ji( 93261 17 FIGURE 2 27 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-To t28 VDC Power Supply i Test Set Tester For M92 Test Set EM 931 1431 I I P3 Test CA # 1 9325991 U I33 M92 Test Set 54 9 32590 1 C1 ips MIL-T-63264 LI9 W 7779

28、906 0444054 L W 1-63264 (AR) TEST #! 3 Power CA # 2 9325990 I I Osci 11 oscope FIGURE: 3 28 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NIL-T-b3264 49 W 779990b OM4055 3 MIL- T-63264 (AR) TEST # 4 To 28 VDC Bp Test Set Tester For M92 Test Set ,jJ

29、 Black Allig. Clips Power CA # 2 “Sj 9325990 I I Disp 931 1434 Test CA # 1 9325991 . I P1 13 I reech Plate ase Plate Disp. Test Adapter 932621 1 P1 or P2 ? Test CA # 2 9325992 P1 or P2 FIGURE 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-T-63264 49 = 9979906 0444056 5 M MIL-T-63264 (AR) - Test CA ?! 1 4P9 1 9325991 TEST # 5 -I Ohmmeter Test Set Tester For 1492 Test Set Ohmme ter & FIGURE 5 30 Y Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-