ARMY MIL-W-63451-1981 WARHEAD GUIDED MISSILE HE M207E2 LINER FOR《M207E2型烈性炸药导弹弹头衬垫》.pdf

1、NIL-W-b3q53 33 - 77777Ub 0350803 2 = y- s-37 - “7 - -. MIL-W-6345 1 (AR) 17 JUNE 1981 MILITARY SPECIFICATION WARHEAD, GUIDED MISSILE, HE, M207E2 . LINER FOR This specification is approved for use by the U.S. Army Armament Research and Development Comand, and is available for use by all Departments a

2、nd Agencies of the Department of Defense. 1. SCOPE 1.1 This specification covers the quality assurance provisions and special requirements not covered by the drawings for the fabrication and packing of liner for M207E2 Warhead. 2. APPLICABLE DOCUMENTS 2.1 Issues of documents. The following documents

3、 of the issue in effect on date of invitation for bids or request for proposals form a part of this specification to the extent specified herein. SPECIFICATIONS MILITARY MIL-A-48078 - Ammunition Standaid Quality Assurance Provisions, General Specification for STANDARDS MILITARY MIL-STD-1169 - Packag

4、ing, Packing and Marking- for Shipment of Inert Ammunition Components. DRAWINGS US ARMY ARMAMENT RESEARCH AND DEVELOPMENT COMMAND 9340752 Liner FSC: 1336 pK THIS DOCUMENT CONTAINS PAGES. , Licensed by Information Handling ServicesMIL-W-63451 (AR) - (Copies of specifications, standards, drawings, and

5、 publications required by suppliers in connection with specific procurement functions should be obtained from the .procuring activity or as directed by the contracting officer. ) 3. REQUIREMENTS 3.1 Materials. Materials shall be in accordance with applicable drawings and specifications. 3.2 Parts. T

6、he parts shall comply with all requirements specified on Drawing 9340752, all associated drawings and with requirements of applicable standards and specifications. 3.3 Data requirements. The contractor shall generate data in accordance with requirements of data item description cited in 6.4. 3.4 Fir

7、st article inspection. This specification contains technical provisions for first article inspection. Requirements for the submission of first article samples by the contractor shall be as specified in the con t rac t, 3.5 Workmans.hip. All parts shall be fabricated in a thorough, workmanlike manner

8、. The parts shall be free of burrs, chips, sharp edges, cracks, unblended radii, dents, tool marks, chipped edges, warpage, gouges, surface defects, dirt, grease, corrosion products, burn marks, and other foreign matter. The cleaning method used shall not be injurious to any of the parts, nor shall

9、the parts be contaminated by the cleaning agents. 4. QUALITY ASSURANCE PROVISIONS 4.1 Responsibility for inspection and standard quality assurance provisions. Unless otherwise specified herein or in the contract, the provisions of MIL-A-48078 shall apply and are hereby made a part of this detailed s

10、pec if i ca t ion. 4.2 Classification of inspections. The following types of inspections shall be conducted. a. First article inspection b. Quality conformance inspection 4.3 . First article inspection 2 Licensed by Information Handling ServicesMIL-W-63451 (AR) 4.3.1 Submission. The contractor shall

11、 submit a first article sample as designated by the Contracting Officer for evaluation in accordance with provisions of 4.3.2. consist of the following item in sample quantities as indicated. The first article sample shall Part Description Liner Drawing Quant i ty 9340 75 2 20 4.3.2 Inspections to b

12、e performed. See MIL-A-48078 and Table I spec if i ed here in. 4.3.3 Rejection. See MIL-A-48078. 3 Licensed by Information Handling Servicesn n O I w w I a $ cn 7 .rl TI X al sod, U m .rl *rl rluu F9 rcI -4 F4 El U m a O U e, a d al X al a m !n O U -4 u. a. UwH rd can s68? a al U ual !3cn mbo ual a

13、al d .rl W al a al z c, 6 Licensed by Information Handling Servicesd f - MIL-W-63451 13 7797906 O350807 3 alal MM (da oc3 . O0 n 4 a, U O z al al v) v - a ac X XaJ ala a a(d FI m ac 2“ 7 Licensed by Information Handling ServicesMIL-W-b3LI5L 13 W 9977906 0350808 5 MIL-W-63451 (AR) 4.4.3 Testing. Test

14、ing is described in First Article and Quality Conformance Inspec tion tables. 4.4.4 Inspection- equipment. The inspection equipment required to perform the examination and tests prescribed herein is described in the II Paragraph Reference/Inspection Method“ column in the tables starting with paragra

15、ph 4.4.2.1. The contractor shall submit for approval inspection equipment designs in accordance with the terms of the contract. See Section 6 of MIL-A-48078 and 6.3 herein. 4.5 Methods of inspection 4.5.1 Materials, components and processes. Compliance with all requirements of Section 3 of this spec

16、ification shall be ascertained by current and continuing examination of inspection and test data to determine that all components (parts and materials) have been inspected and tested and found to comply with their respective drawing and specification requirements, and that all specified manufacturin

17、g processes have been followed. 4.5.1.1 Visual and mechanical inspection. The visual, manual and mechanical inspections and tests shall verify compliance with the requirements of Section 3 and 5 of this specification in accordance with 4.4.2 herein and Table 1. 5, PACKAGING 5.1 Packaging and packing

18、. The parts shall be packaged and packed in accordance with the requirements of MIL-STD-1169. 5.2 Marking. Marking shall be in accordance with the requirements of MIL-STD-1169. 6. NOTES 6.1 Intended use. The liner covered by this specification is a component of the Improved TOW Warhead Section, Guid

19、ed Missile, HE, M207E2. 6.2 Ordering data. See MIL-A-48078. 6.3 Submission of inspection equipment designs for approval. See MIL-AL48078. Submit equipment designs as required to Commander, US Army Armament Research and Development Command, ATTN: DRDAR-QAR-I, Dover, NJ 07801. ,8 1 Licensed by Informa

20、tion Handling Servicesi Custodian: Army-AR MIL-U-63451 13 7777906 O350807 7 - MIL-W-6345 1 (AR) 6.4 Data requirements. Deliverable data required by the specification cited as follows: Data Requirement Applicable Data Item Ammunition Data DI -L- 14 1 O Preparing Act i vit y : Army-AR *U.S. GOVERNMENT PRINTING OFFICE: 1981-703-02315240 Project Number: 1336-A400 9 Licensed by Information Handling Services