ARMY UFGS-02 62 16-2010 COMMISSIONING AND DEMONSTRATION FOR SOIL VAPOR EXTRACTION (SVE) SYSTEMS《土壤蒸汽提取(SVE)系统试运和示范》.pdf

1、*USACE / NAVFAC / AFCESA / NASA UFGS-02 62 16 (February 2010)-Preparing Activity: USACE SupersedingUFGS-02 62 16 (October 2007)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated April 2010*SECTION TABLE OF CONTENTSDIVISION 02 - EXISTING CONDITIONSSECTION 02 62 16COMMI

2、SSIONING AND DEMONSTRATION FOR SOIL VAPOR EXTRACTION (SVE) SYSTEMS02/10PART 1 GENERAL1.1 MEASUREMENT AND PAYMENT1.1.1 Baseline Monitoring1.1.2 Commissioning1.1.3 Demonstration1.2 REFERENCES1.3 GENERAL REQUIREMENTS1.3.1 Chemical Testing1.3.2 Submittal Requirements1.3.3 Sequencing and Scheduling1.4 SU

3、BMITTALS1.5 REGULATORY REQUIREMENTS1.5.1 Permits and Licenses1.5.2 Air Emissions1.5.3 Noise ControlPART 2 PRODUCTS (NOT APPLICABLE)PART 3 EXECUTION3.1 BASELINE MONITORING3.1.1 Temperature and Precipitation3.1.2 Barometric Pressure and Vadose Zone Pressure3.1.3 Soil Gas Monitoring3.1.4 Groundwater Le

4、vels3.1.5 Soil Boring Sampling3.1.6 Baseline Monitoring Report3.2 COMMISSIONING3.2.1 Commissioning Team and Checklists3.2.2 Tests3.3 DEMONSTRATION OF FULL-SCALE SYSTEM3.3.1 Period of Demonstration3.3.2 Hours of Operation and Downtime3.3.3 Operational Airflow RatesSECTION 02 62 16 Page 1Provided by I

5、HSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3.3.4 Process Monitoring3.3.4.1 Meteorological Monitoring3.3.4.2 Vadose Zone Pressure Monitoring3.3.5 Groundwater Levels3.3.6 Process Air Stream and Equipment Monitoring3.3.6.1 Combustible Organic Vapor Monitoring3.

6、3.6.2 Airflow Rate Monitoring3.3.6.3 Air/Water Separator and Condensate3.3.6.4 Blower and Particulate Filter3.3.7 Vapor Stream Contaminant Level Monitoring3.3.7.1 Field Analysis of Vapor Stream Samples3.3.7.2 Laboratory Analysis of Vapor Stream Samples3.3.7.3 Full-Scale Demonstration Report- End of

7、Section Table of Contents -SECTION 02 62 16 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-02 62 16 (February 2010)-Preparing Activity: USACE SupersedingUFGS-02 62 16 (October 2007)UNIFIED FACILITIES GUIDE

8、SPECIFICATIONSReferences are in agreement with UMRL dated April 2010*SECTION 02 62 16COMMISSIONING AND DEMONSTRATION FOR SOIL VAPOR EXTRACTION (SVE) SYSTEMS02/10*NOTE: This guide specification covers the requirements for commissioning and demonstration for soil vapor extraction (SVE) systems.Edit th

9、is guide specification for project specific requirements by adding, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Comments and s

10、uggestions on this guide specification are welcome and should be directed to the technical proponent of the specification. A listing of technical proponents, including their organization designation and telephone number, is on the Internet.Recommended changes to a UFGS should be submitted as a Crite

11、ria Change Request (CCR).*PART 1 GENERAL*NOTE: Commissioning is performed after construction has been completed, and is an ordered process for testing and start-up of SVE system equipment. During commissioning, pre-commissioning checklists are completed, and functional performance tests are performe

12、d to test individual components of the system and subsystems. Demonstration serves as a prove-out period. The purpose of the demonstration is to show that the SVE system, as a whole, is ready to be put into service.This guide specification should be used in conjunction with Section 02 01 50 OPERATIO

13、N, MAINTENANCE, AND PROCESS MONITORING FOR SOIL VAPOR SECTION 02 62 16 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EXTRACTION SYSTEMS. For small-scale SVE projects, editing and combining this section with Section 02 01 50 should be consider

14、ed. Additional guidance on start-up of SVE systems can be found in EM 1110-1-4001 SOIL VAPOR EXTRACTION AND BIOVENTING, dated Nov 1995.This guide specification should be coordinated with other sections that may also include commissioning requirements for SVE system components, to avoid unnecessary d

15、uplication of requirements.*1.1 MEASUREMENT AND PAYMENT*NOTE: If there is a separate Measurement and Payment Section, edited versions of these paragraphs should be inserted in that section. Coordinate these paragraphs with the bidding schedule.Separate, lump sum prices are generally recommended for

16、Baseline Monitoring, Commissioning, and Demonstration. However it is also recommended that bidders be required to provide unit cost amounts for laboratory testing for chemical data. Unit costs will provide a basis for negotiating for additional tests, if determined that more testing than was origina

17、lly anticipated is required. Under the pricing structure shown below, costs for laboratory analysis are covered under Section 01 35 45.00 10 CHEMICAL DATA QUALITY CONTROL.It is recommended that the bid sheet be structured so that a portion of the payment (i.e., at least 30 percent) for construction

18、of the SVE system be withheld at least until the full-scale demonstration has been completed. If acceptance of the SVE system is granted before the bugs are worked out, there may not be sufficient incentive for the Contractor to finish fixing problems with the SVE system.*Measurement shall be based

19、on completion of contract requirements. Payment will be at the respective contract prices in the bidding schedule.1.1.1 Baseline MonitoringCompensation shall be a lump sum price for Baseline Monitoring. Physical and chemical testing performed in the field, and sampling shall be included in this pric

20、e. Cost for laboratory analysis of samples is covered in Section 01 35 45.00 10 CHEMICAL DATA QUALITY CONTROL and is not included in this price.1.1.2 Commissioning*NOTE: Laboratory analysis of samples is usually not required during Commissioning. Vapor stream SECTION 02 62 16 Page 4Provided by IHSNo

21、t for ResaleNo reproduction or networking permitted without license from IHS-,-,-monitoring during commissioning typically involves using a field instrument, such as a flame ionization detector (FID).*Compensation shall be a lump sum price for completion of Commissioning. Physical and chemical testi

22、ng performed in the field, and sampling shall be included in this price. Laboratory analysis of samples will be not be _ required during Commissioning.1.1.3 Demonstration*NOTE: Vapor stream monitoring during the full-scale demonstration typically involves using a field instrument, such as an FID, in

23、 conjunction with laboratory analysis of a limited number of samples.*Compensation shall be a lump sum price for completion of Demonstration. Physical and chemical testing performed in the field, and sampling shall be included in this price. Costs for laboratory analysis of samples are covered in Se

24、ction 01 35 45.00 10 CHEMICAL DATA QUALITY CONTROL and are not included in this price.1.2 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications are referred to in the text by basic designation only and listed in this paragraph

25、 by organization, designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue date

26、s.References not used in the text will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish print process.*The publications listed below form a part of this specification to the extent referenced. The publications are referred

27、 to within the text by the basic designation only.ASTM INTERNATIONAL (ASTM)ASTM D 4750 (1987; R 2001) Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well)SECTION 02 62 16 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license fr

28、om IHS-,-,-1.3 GENERAL REQUIREMENTS*NOTE: Commissioning and demonstration of the full-scale SVE system should be preceded by a pilot-scale demonstration. The pilot-scale demonstration (or field demonstration) is usually the last step of the design investigation. Data gained during the pilot-scale de

29、monstration are critical to proper sizing of the blower and other process equipment, and to proper lateral and vertical placement of SVE wells. This section only addresses commissioning and demonstration for full-scale SVE systems.The specifications for the treatment system, or for components of the

30、 treatment system, should include requirements for testing, adjusting and balancing. Blowers, motors and air handling components of the SVE system should be tested in accordance with Section 23 05 93 TESTING, ADJUSTING, AND BALANCING OF HVAC SYSTEMS prior to commissioning. Although Section 23 05 93

31、is oriented primarily toward HVAC systems, the same testing, adjusting, and balancing requirements should be applied to components of the SVE system.*1.3.1 Chemical TestingChemical sampling and analysis required in this section shall be conducted in accordance with SECTION 01 35 45.00 10 CHEMICAL DA

32、TA QUALITY CONTROL.1.3.2 Submittal RequirementsSubmittals shall be provided in both hard copy, and electronic files on disc. Electronic files shall be compatible with the following software: _. If a part of a submittal is not available in electronic format, include a note describing which items were

33、 not provided in electronic format and explaining why the items could not be provided in electronic format. Submit the following:a. A plan for Baseline Monitoring at least 60 _ calendar days before initiating Baseline Monitoring. A period of not less than 30 _ calendar days shall be allowed in the s

34、chedule for Government review. The plan shall include physical and chemical monitoring requirements, including test parameters, frequency of sampling, number of samples, and sampling locations; and laboratory turn-around-time. Test methods, and other sampling and analysis requirements shall be cover

35、ed by submittals specified in Section 01 35 45.00 10 CHEMICAL DATA QUALITY CONTROL. The plan shall also include the forms that will be used to record data in the field, and an outline of the Baseline Monitoring Report. A schedule for baseline monitoring, at least 14 _ calendar days prior to the star

36、t of baseline monitoring. Baseline Monitoring Report not more than 35 _ calendar days after completing baseline monitoring.b. List of team members who will represent the Contractor in the pre-commissioning checks and functional performance tests, at least SECTION 02 62 16 Page 6Provided by IHSNot fo

37、r ResaleNo reproduction or networking permitted without license from IHS-,-,-14 _ calendar days prior to the start of pre-commissioning checks.c. A plan for Commissioning at least 60 _ calendar days before initiating Commissioning. A period of not less than 30 _ calendar days shall be allowed in the

38、 schedule for Government review. The Commissioning Plan shall include a list of Pre-Commissioning and Functional Performance Tests. The plan shall also include the forms that will be used to record data in the field. Include detailed procedures for pre-commissioning checks and functional performance

39、 tests, at least 35 _ calendar days prior to the start of pre-commissioning checks. A period of not less than 21 _ calendar days shall be allowed in the schedule for Government review. A schedule for pre-commissioning checks and functional performance tests, at least 14 _ calendar days prior to the

40、start of pre-commissioning checks. The Commissioning Report not more than 14 _ calendar days after completing commissioning. A period of not less than 14 _ calendar days shall be allowed in the schedule for Government review. Completed pre-commissioning checklists and functional performance tests ch

41、ecklists (organized by system and by subsystems) shall be submitted as one package. The results of failed tests shall be included along with a description of the corrective action taken.d. A plan for Full-Scale Demonstration at least 60 _ calendar days before initiating the Full-Scale Demonstration.

42、 A period of not less than 30 _ calendar days shall be allowed in the schedule for Government review. The plan shall include physical and chemical monitoring requirements, including test parameters, frequency of sampling, number of samples, and sampling locations; and laboratory turn-around-time. Te

43、st methods, and other sampling and analysis requirements shall be covered by submittals specified in Section 01 35 45.00 10 CHEMICAL DATA QUALITY CONTROL. The plan shall also include the forms that will be used to record data in the field, and an outline of the Full-Scale Demonstration Report. A Ful

44、l-Scale Demonstration Report not more than 7 _ calendar days after completion of the Demonstration. Operations log sheets attached to the Full-Scale Demonstration Report. The log shall be kept in notebooks organized in chronological order, and shall be submitted with the Full-Scale Demonstration Report not more than 14 _