ARMY UFGS-09 30 13-2013 CERAMIC TILING.pdf

1、*USACE / NAVFAC / AFCESA / NASA UFGS-09 30 13 (November 2013)-Preparing Activity: USACE SupersedingUFGS-09 30 00 (August 2010)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated October 2013*SECTION TABLE OF CONTENTSDIVISION 09 - FINISHESSECTION 09 30 13CERAMIC TILING1

2、1/13PART 1 GENERAL1.1 REFERENCES1.2 SUSTAINABILITY REQUIREMENTS1.3 SUBMITTALS1.4 OTHER SUBMITTAL REQUIREMENTS1.4.1 Local/Regional Materials1.4.2 Environmental Data1.5 QUALITY ASSURANCE1.6 DELIVERY, STORAGE, AND HANDLING1.7 ENVIRONMENTAL REQUIREMENTS1.8 WARRANTY1.9 EXTRA MATERIALSPART 2 PRODUCTS2.1 T

3、ILE2.1.1 Porcelain Tile2.1.2 Mosaic Tile2.1.3 Quarry Tile2.1.4 Glass Tile2.1.5 Glazed Wall Tile2.1.6 Accessories2.2 SETTING-BED2.2.1 Aggregate for Concrete Fill2.2.2 Portland Cement2.2.3 Sand2.2.4 Hydrated Lime2.2.5 Metal Lath2.2.6 Reinforcing Wire Fabric2.3 WATER2.4 MORTAR, GROUT, AND ADHESIVE2.4.1

4、 Dry-Set Portland Cement Mortar2.4.2 Latex-Portland Cement Mortar2.4.3 Ceramic Tile Grout2.4.4 Organic AdhesiveSECTION 09 30 13 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.4.5 Epoxy Resin Grout2.4.6 Furan Resin Grout2.4.7 Sealants2.4.8 Ce

5、mentitious Backer Board2.4.9 Glass Mat Gypsum Backer Panel2.5 TRANSITION STRIPS2.6 MEMBRANE MATERIALS2.7 COLOR, TEXTURE, AND PATTERNPART 3 EXECUTION3.1 PREPARATORY WORK AND WORKMANSHIP3.2 GENERAL INSTALLATION REQUIREMENTS3.3 INSTALLATION OF WALL TILE3.3.1 Workable or Cured Mortar Bed3.3.2 Dry-Set Mo

6、rtar and Latex-Portland Cement Mortar3.3.3 Organic Adhesive3.3.4 Furan Mortar and Grout3.3.5 Ceramic Tile Grout3.4 INSTALLATION OF FLOOR TILE3.4.1 Workable or Cured Mortar Bed3.4.2 Dry-Set and Latex-Portland Cement3.4.3 Resinous Grout3.4.4 Ceramic Tile Grout3.4.5 Waterproofing3.4.6 Concrete Fill3.5

7、INSTALLATION OF TRANSITION STRIPS3.6 EXPANSION JOINTS3.6.1 Walls3.6.2 Floors3.7 CLEANING AND PROTECTING- End of Section Table of Contents -SECTION 09 30 13 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-09

8、30 13 (November 2013)-Preparing Activity: USACE SupersedingUFGS-09 30 00 (August 2010)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated October 2013*SECTION 09 30 13CERAMIC TILING11/13*NOTE: This guide specification covers the requirements for a variety of types of c

9、eramic tile for walls and floors.Adhere to UFC 1-300-02 Unified Facilities Guide Specifications (UFGS) Format Standard when editing this guide specification or preparing new project specification sections. Edit this guide specification for project specific requirements by adding, deleting, or revisi

10、ng text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Comments, suggestions and recommended changes for this guide specification are welcome and should be

11、submitted as a Criteria Change Request (CCR).*PART 1 GENERAL*NOTE: Tile grouted with epoxy or furan resin is included in this specification, but quarry tile subject to severe chemical exposures is specified in Section 09 35 16 CHEMICAL-RESISTANT QUARRY TILE.For Army facilities, buildings not exclude

12、d by UFC 3-301-01 or TI 800-01 Design Criteria will be accessible in accordance with 36 CFR, Part 1191, Americans with Disabilities Act (ADA) Accessibility Guidelines for Buildings and Facilities; Architectural Barriers Act (ABA) Accessibility Guidelines.Drawings will indicate location, dimensions,

13、elevations, schedules, content, details and such SECTION 09 30 13 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-other information as required to indicate the extent of the work.Product selections must be based on esthetic values, function, ty

14、pe of facility, and cost as related to project needs.*1.1 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications are referred to in the text by basic designation only and listed in this paragraph by organization, designation, d

15、ate, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.References not used in the tex

16、t will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish print process.*The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic

17、 designation only.AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)ANSI A137.1 (2012) American National Standards Specifications for Ceramic TileANSI A137.2 (2012) American National Standards Specifications for Glass TileASTM INTERNATIONAL (ASTM)ASTM A185/A185M (2007) Standard Specification for Steel Wel

18、ded Wire Reinforcement, Plain, for ConcreteASTM C1026 (2013) Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw CyclingASTM C1027 (2009) Standard Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic TileASTM C1178/C1178M (2011) Standard Specificatio

19、n for Glass Mat Water-Resistant Gypsum Backing PanelSECTION 09 30 13 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ASTM C144 (2011) Standard Specification for Aggregate for Masonry MortarASTM C150/C150M (2012) Standard Specification for Portl

20、and CementASTM C206 (2003; R 2009) Standard Specification for Finishing Hydrated LimeASTM C207 (2006; R 2011) Standard Specification for Hydrated Lime for Masonry PurposesASTM C241/C241M (2013) Standard Specification for Abrasion Resistance of Stone Subjected to Foot TrafficASTM C33/C33M (2013) Stan

21、dard Specification for Concrete AggregatesASTM C373 (1988; R 2006) Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware ProductsASTM C648 (2004; R 2009) Breaking Strength of Ceramic TileASTM C847 (2012) Standard Specification for Metal LathASTM D2103 (2

22、010) Standard Specification for Polyethylene Film and SheetingASTM D226/D226M (2009) Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and WaterproofingASTM D4068 (2009) Chlorinated Polyethylene Sheeting for Concealed Water-Containment MembraneASTM E2129 (2010) Standard Pract

23、ice for Data Collection for Sustainability Assessment of Building ProductsASTM F446 (1985; R 2009) Grab Bars and Accessories Installed in the Bathing AreaBAY AREA AIR QUALITY MANAGEMENT DISTRICT (Bay Area AQMD)Bay Area AQMD Rule 8-51 (1992; R 2001) Adhesive and Sealant ProductsGREEN SEAL (GS)GS-36 (

24、2011) Commercial AdhesivesSECTION 09 30 13 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MARBLE INSTITUTE OF AMERICA (MIA)MIA Design Manual (2003) Dimension Stone Design ManualSOUTH COAST AIR QUALITY MANAGEMENT DISTRICT (SCAQMD)SCAQMD Rule 11

25、68 (1989; R 2005) Adhesive and Sealant ApplicationsTILE COUNCIL OF NORTH AMERICA (TCNA)TCNA Hdbk (2013) Handbook for Ceramic, Glass, and Stone Tile InstallationU.S. GREEN BUILDING COUNCIL (USGBC)LEED GBDC (2009) LEED Reference Guide for Green Building Design and ConstructionLEED NC (2009) Leadership

26、 in Energy and Environmental Design(tm) New Construction Rating SystemU.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)36 CFR 1191 Americans with Disabilities Act (ADA) Accessibility Guidelines for Buildings and Facilities; Architectural Barriers Act (ABA) Accessibility Guidelines1.2 SUSTAINA

27、BILITY REQUIREMENTS*NOTE: The bracketed items are representative of LEED material documentation and requirements that may apply to this project. These items should be edited to reflect the project requirements.*Materials in this technical specification may contribute towards contract compliance with

28、 sustainability requirements. See Section 01 33 29 LEED DOCUMENTATION for project LEED NC local/regional materials, low-emitting materials, recycled content, _ and rapidly renewable materials requirements.1.3 SUBMITTALS*NOTE: Review submittal description (SD) definitions in Section 01 33 00 SUBMITTA

29、L PROCEDURES and edit the following list to reflect only the submittals required for the project.The Guide Specification technical editors have designated those items that require Government approval, due to their complexity or criticality, with a “G.“ Generally, other submittal items can be reviewe

30、d by the Contractors Quality Control System. Only add a “G” to an item, if the submittal SECTION 09 30 13 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-is sufficiently important or complex in context of the project.For submittals requiring Go

31、vernment approval on Army projects, a code of up to three characters within the submittal tags may be used following the “G“ designation to indicate the approving authority. Codes for Army projects using the Resident Management System (RMS) are: “AE“ for Architect-Engineer; “DO“ for District Office

32、(Engineering Division or other organization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes following the “G“ typically are not used for Navy, Air Force, and NASA projects.Choose the first bracketed item for Navy, Air Force and NASA project

33、s, or choose the second bracketed item for Army projects.*Government approval is required for submittals with a “G“ designation; submittals not having a “G“ designation are for Contractor Quality Control approval. information only. When used, a designation following the “G“ designation identifies th

34、e office that will review the submittal for the Government. Submit the following in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:SD-02 Shop DrawingsDetail Drawings; G; G, _SD-03 Product Data Local/Regional Materials; (LEED NC)Environmental DataTile; G; G, _Setting-Bed; G; G, _Mortar, Grout,

35、 and Adhesive; (LEED); G; G, _Tile; (LEED NC)Reinforcing Wire Fabric; (LEED NC)SD-04 SamplesTile; G; G, _Accessories; G; G, _Transition Strips; G; G, _Grout; G; G, _SD-07 CertificatesTileMortar, Grout, and AdhesiveSD-08 Manufacturers InstructionsMaintenance InstructionsSD-10 Operation and Maintenanc

36、e DataSECTION 09 30 13 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Installation; G; G, _SD-11 Closeout SubmittalsLocal/Regional Materials; (LEED)LEED DocumentationTile; (LEED)Adhesives; (LEED)1.4 OTHER SUBMITTAL REQUIREMENTS1.4.1 Local/Regi

37、onal MaterialsSubmit documentation indicating distance between manufacturing facility and the project site and also the distance of raw material origin from the project site. For Tile and Reinforcing Wire Fabric indicate percentage of post-industrial and post-consumer recycled content per unit of pr

38、oduct. Indicate relative dollar value of recycled content products to total dollar value of products included in project.1.4.2 Environmental Data*NOTE: ASTM E2129 provides for detailed documentation of the sustainability aspects of products used in the project. This level of detail may be useful to

39、the Contractor, Government, building occupants, or the public in assessing the sustainability of these products.*Submit Table 1 of ASTM E2129 for the following products: _.1.5 QUALITY ASSURANCEInstallers to be from a company specializing in performing this type of work and have a minimum of two year

40、s experience. Each type and color of tile to be provided from a single source. Each type and color of mortar, adhesive, and grout to be provided from the same source.1.6 DELIVERY, STORAGE, AND HANDLINGShip tiles in sealed packages and clearly marked with the grade, type of tile, producer identificat

41、ion, and country of origin. Deliver materials to the project site in manufacturers original unopened containers with seals unbroken and labels and hallmarks intact. Protect materials from weather, and store them under cover in accordance with manufacturers printed instructions.1.7 ENVIRONMENTAL REQU

42、IREMENTSDo not perform ceramic tile work unless the substrate and ambient temperature is at least 10 degrees C 50 degrees F and rising. Maintain temperature above 10 degrees C 50 degrees F while the work is being performed and for at least 7 days after completion of the work. When temporary heaters

43、are used, ventilate the area to the outside to avoid carbon dioxide damage to new tilework.SECTION 09 30 13 Page 8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1.8 WARRANTYProvide manufacturers standard performance guarantees or warranties that extend beyond a 1-year period.1.9 EXTRA MATERIALSSupply an extra 2_ percent of each type tile used in clean and marked cartons.PART 2 PRODUCTS*NOTE: The surface datum will be established for the top of the tile floors to indicate to other trades the required elevation for the top of subfloor.*