ARMY UFGS-09 69 13-2010 RIGID GRID ACCESS FLOORING.pdf

1、*USACE / NAVFAC / AFCESA /NASA UFGS-09 69 13 (August2010)-Preparing Activity: USACE SupersedingUFGS-09 69 13 (April 2007)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated July 2010*SECTION TABLE OF CONTENTSDIVISION 09 - FINISHESSECTION 09 69 13RIGID GRID ACCESS FLOOR

2、ING08/10PART 1 GENERAL1.1 REFERENCES1.2 SYSTEM DESCRIPTION1.2.1 Allowable Tolerances1.2.2 Floor Panels1.2.3 Stringers1.2.4 Pedestals1.2.5 Bonding Strength of Pedestal Adhesive1.2.6 Bond Strength of Factory Installed Covering1.2.7 Seismic Calculations1.2.7.1 Navy Requirements1.2.7.2 Army Requirements

3、1.2.8 Air Leakage1.2.9 Grounding1.2.9.1 Metal Grilles1.2.9.2 Joint Resistance1.3 SUBMITTALS1.4 QUALITY ASSURANCE1.5 DELIVERY, STORAGE, AND HANDLING1.5.1 Delivery1.5.2 Storage1.5.3 Handling1.6 EXTRA MATERIALSPART 2 PRODUCTS2.1 FLOOR PANELS2.1.1 Floor System Drawings And Planer Quality2.1.2 Panel Cons

4、truction2.1.2.1 Aluminum2.1.2.2 Hollow Formed Steel2.1.2.3 Metal-Clad Cementitious Fill (Composite Panels)2.1.2.4 Metal-Clad Wood Core2.1.2.5 Lightweight Concrete PanelsSECTION 09 69 13 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.1.3 Floo

5、r Covering2.1.3.1 High Pressure Laminate2.1.3.2 Conductive Surfacing2.1.3.3 Conductive High Pressure Laminate2.1.3.4 Vinyl Composition Tile2.1.3.5 Carpet2.1.4 Edge Strip2.1.5 Accessories2.1.6 Resilient Base2.1.7 Lifting Device2.2 PANEL SUPPORT SYSTEM2.2.1 Pedestals2.2.2 Stringers2.3 FASCIA2.4 STEPS

6、AND RAMPS2.4.1 Steps2.4.2 Ramps2.5 RAILINGS2.6 FACTORY TESTS2.6.1 Load Tests2.6.2 Bond Strength of Covering2.7 COLOR2.8 REGISTERS AND GRILLES2.9 PERFORATED AIR SUPPLY PANELS2.10 CUT OUTS2.11 EDGE CLOSUREPART 3 EXECUTION3.1 INSTALLATION3.1.1 Preparation for Installation3.1.2 Pedestals3.1.3 Stringers3

7、.1.4 Auxiliary Framing3.1.5 Panels3.1.6 Resilient Base3.1.7 Fascia Plates3.1.8 Repair of Zinc Coating3.2 FIELD TESTS3.2.1 Acceptance Tests3.2.2 Electrical Resistance3.3 CLEANING AND PROTECTION3.3.1 Cleaning3.3.2 Protection3.3.3 Surplus Material Removal3.4 FIRE SAFETY3.5 SEISMIC SPECIAL INSPECTION AN

8、D TESTING3.6 OPERATION AND MAINTENANCE MANUALS- End of Section Table of Contents -SECTION 09 69 13 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA /NASA UFGS-09 69 13 (August2010)-Preparing Activity: USACE SupersedingUF

9、GS-09 69 13 (April 2007)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated July 2010*SECTION 09 69 13RIGID GRID ACCESS FLOORING08/10*NOTE: This Guide Specification covers the requirements for rigid grid access flooring.Edit this guide specification for each project sp

10、ecific requirements by adding, deleting, or revising text. Choose applicable bracketed items(s) or insert appropriate information.Remove information and/or requirements not related to the respective project, whether or not brackets are present.Comments and suggestions on this guide specification are

11、 welcome and should be directed to the technical proponent of the specification. A listing of technical proponents, including their organization designation and telephone number, is on the Internet.Recommended changes to a UFGS should be submitted as a Criteria Change Request (CCR).*PART 1 GENERAL*N

12、OTE: This specification does not include the floor upon which the elevated floor is superimposed, except to define the nature and condition of the supporting floor.Access flooring systems include floor panels, pedestals and items such as stringers, steps, ramps, closures and trim. Access flooring sy

13、stems must be designed to accommodate static, rolling and impact loadings.None of the mechanical and electrical services essential to the operation of equipment are included. Coordinate with mechanical and electrical SECTION 09 69 13 Page 3Provided by IHSNot for ResaleNo reproduction or networking p

14、ermitted without license from IHS-,-,-to provide ventilation and cable openings which will be required.The designer is responsible for identifying and defining requirements for the floors. Drawings must indicate location and limits of the flooring systems, finish floor elevation, panel size, type, f

15、inish and anti-static provisions, colors, pedestal mounting and subfloor connection system details.STRINGERLESS ACCESS FLOORING is covered in SECTION 09 69 19.Stair and/or ramp information, such as tread width and riser height for stairs and width, slope and length of ramps, including railings, are

16、included in this section.Ancillary components such as floor diffusers and grills, fascias and floor opening trims are also included.Seismic loadings and any other information required to indicate the extent of work must be considered in designing access flooring systems.There are three fundamental c

17、onditions relative to the design of access flooring installations:Condition I Floors are completely surrounded by building walls. These are the most resistant to seismic loadings.Condition II Floors have part of the edge exposed and not restrained by other structural elements. Condition II floors ar

18、e less resistive to seismic loadings along the axis of the unconstrained side. Seismic loadings can be resisted by securing the perimeter panels of all floors to the supporting structural framing and fitting the panels tightly together, or by cross bracing the structural frame to resist overturning.

19、 The designer must select fascia type and finish for exposed edges.Condition III Floors are free standing without lateral contact with other structural elements. Type III floors are primarily strengthened with cross bracing to resist lateral loads.Buildings not excluded by UFC 3-310-02A or TI 800-01

20、 Design Criteria will be accessible in accordance with 36 CFR, Part 1191, Americans with Disabilities Act (ADA) Accessibility Guidelines for Buildings and Facilities.On the drawings, show:1. Extent and shape of access flooring area. Include details of panel-to-panel and panel-to-wall SECTION 09 69 1

21、3 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-intersections, edge treatment at openings, expansion joints, elevation(s) above structural floor, and other special features of the elevated floor system.2. Location and design of ramps, steps,

22、and doors to access floor area; railing heights and design.3. Location and sizes of registers, grilles, perforated panels, and cable openings through access floor panels.4. Design and type of plenum fire extinguishing systems, if space under access floor is to be used as air plenum.5. Layout of plen

23、um dividers.6. Pattern of access floor panels.7. Location of building electrode. Coordinate structural grounding connections with appropriate building and electrical systems.*1.1 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The public

24、ations are referred to in the text by basic designation only and listed in this paragraph by organization, designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference

25、 Article. Also use the Reference Wizards Check Reference feature to update the issue dates.References not used in the text will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish print process.*The publications listed below

26、form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC)AATCC TM 134 (1969; R 2006) Electrostatic Propensity of CarpetsAATCC TM 16 (1964; R 2004) Colorfast

27、ness to LightSECTION 09 69 13 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-APA - THE ENGINEERED WOOD ASSOCIATION (APA)APA EWCG (2005) Engineered Wood Construction Guide: Building Requirements and Related Panel SystemsAPA PS 1 (1995) Voluntar

28、y Product Standard for Construction and Industrial PlywoodASTM INTERNATIONAL (ASTM)ASTM A 780/A 780M (2009) Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized CoatingsASTM B 85/B 85M (2009) Standard Specification for Aluminum-Alloy Die CastingsASTM E 648 (2009a) Standar

29、d Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy SourceASTM E 84 (2010) Standard Test Method for Surface Burning Characteristics of Building MaterialsASTM F 1066 (2004) Standard Specification for Vinyl Composition Floor TileCEILINGS Errata First Printing)

30、 International Building CodeNATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)ANSI/NEMA LD 3 (2005) Standard for High-Pressure Decorative LaminatesSECTION 09 69 13 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NATIONAL FIRE PROTECTION ASSOC

31、IATION (NFPA)NFPA 75 (2009) Standard for the Protection of Information Technology EquipmentNFPA 99 (2005; TIA 05-1; TIA 05-2; TIA 05-3) Standard for Health Care FacilitiesU.S. DEPARTMENT OF DEFENSE (DOD)UFC 3-310-04 (2007; Change 1) Seismic Design for BuildingsU.S. GENERAL SERVICES ADMINISTRATION (G

32、SA)FS TT-C-490 (1990; Am 2) Cleaning Methods for Ferrous Surfaces and Pretreatments for Organic CoatingsUNDERWRITERS LABORATORIES (UL)UL 779 (1995; R thru 2005) Standard for Electrically Conductive Floorings1.2 SYSTEM DESCRIPTION*NOTE: Access flooring support systems are available as either a string

33、er or stringerless system. Refer to Section 09 69 19 STRINGERLESS ACCESS FLOORING for stringerless applications.A stringer is a horizontal framing member that connects the pedestal head, supports the panel edges and adds lateral stability to the floor system. Stringers should be used on all systems

34、with a height that exceeds 300 mm (12 inches).For Army facilities, specify the stringer system when the total area is over 371 square meters (4000 square feet) unless the system provides bolted connection between the panel and pedestal.For Army facilities requiring stringer type systems, aluminum, h

35、older formed steel, metal-clad cementitious fill, metal-clad wood core and concrete panels may be used.For Air Force facilities, use stringer Type floor systems for data processing facilities.For Air Force facilities requiring stringer type floor systems, aluminum, hollow formed steel and metal-clad

36、 wood core are permitted options.Consideration should be given to loads which will be imposed during operation. Some equipment, such as high speed printers require large quantities of paper to be delivered by carts. When in motion, SECTION 09 69 13 Page 7Provided by IHSNot for ResaleNo reproduction

37、or networking permitted without license from IHS-,-,-these heavy loads may exceed capacity of floor system. Check with user activity and floor system manufacturer when heavy rolling loads are expected.Zinc whiskers can occur on the underside of raised floor systems which are treated with a zinc elec

38、troplated anti-corrosion coating. Zinc whiskers are small enough (2 microns in diameter up to several millimeters in length) to render normal dust filters on computer equipment ineffective. The result is possible electrical shorts and damage to circuitry and equipment.*Install access flooring at the

39、 location and elevation and in the arrangement shown on the drawings. The floor system shall be of the rigid grid stringer type, complete with all supplemental items, and be the standard product of a manufacturer specializing in the manufacture of access flooring systems.a. Provide for self-alignmen

40、t of floor panels, adjustable pedestals and readily removable floor panels covered as specified.b. Lateral stability of floor support system shall be independent of panels. Provide a finished assembly that is rigid and free of vibration, noises, and rocking panels. Provide bolted stringer system wit

41、h equipotential plane grounding.c. Submit Certificates for the complete Access Flooring System including, but not limited to the following:1) Compliance with ICC-ES AC300. Submit design data substantiating compliance with International Building Code Acceptance Criteria for Access Floors.2) Load-bear

42、ing capabilities of pedestals, floor panels, and pedestal adhesive resisting force.3) Supporting independent laboratory test reports. For panel loads, test results include concentrated loads at center of panel, panel edge midpoint, ultimate loads and uniform loads.4) Floor electrical characteristics

43、.5) Material requirements6) An elevated floor system free of defects in materials, fabrication, finish, and installation, that will remain so for a period of not less than _ years after completion.d. Warrant that, upon notification by the Government, defective work will be immediately replaced with

44、new work at no additional cost to the Government.e. Submit manufacturers descriptive data, catalog cuts, and installation instructions. Include in the data information about any design and production techniques, total system including all accessories and finish coatings of under-floor components, pr

45、ocedures and policies used to conserve energy, reduce material, improve waste SECTION 09 69 13 Page 8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-management or incorporate green building/recycled products into the manufacturer of their components or products. Incliude cleaning and maintenance instructions. Systems which contain zinc electroplated anti-corrosion coatings are prohibited.1.2.1 Allowable Tolerancesa. Floor Panel Flatness: Plus or minus 0.5 mm 0.02 in