ARMY UFGS-10 14 00 20-2012 INTERIOR SIGNAGE.pdf

1、USACE / NAVFAC / AFCESA / NASA UFGS-10 14 00.20 (November 2012)-Preparing Activity: USACE Superseding without RevisionUFGS-10 14 02 (February 2009)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated October 2012*SECTION TABLE OF CONTENTSDIVISION 10 - SPECIALTIESSECTIO

2、N 10 14 00.20INTERIOR SIGNAGE11/12PART 1 GENERAL1.1 REFERENCES1.2 SUSTAINABILITY REQUIREMENTS1.2.1 LEED Requirements1.2.2 EPA Comprehensive Procurement Guidelines1.3 SUBMITTALS1.4 EXTRA MATERIALS1.5 QUALITY ASSURANCE1.5.1 Samples1.5.2 Detail Drawings1.6 DELIVERY, STORAGE, AND HANDLING1.7 WARRANTYPAR

3、T 2 PRODUCTS2.1 STANDARD PRODUCTS2.2 ROOM IDENTIFICATION/DIRECTIONAL SIGNAGE SYSTEM2.2.1 Standard Room Signs2.2.2 Changeable Message Strip Signs2.2.3 Type of Mounting For Signs2.2.4 Graphics2.2.5 Character Proportions and Heights2.2.6 Tactile Letters, Symbols and Braille2.3 STAIR SIGNAGE2.4 BUILDING

4、 DIRECTORIES2.4.1 Header Panel2.4.2 Doors2.4.2.1 Door Glazing2.4.2.2 Door Construction2.4.2.3 Door Locks2.4.3 Fabrication2.4.4 Illuminated Units2.4.4.1 Construction2.4.4.2 Message Strips2.4.5 Non-Illuminated UnitSECTION 10 14 00.20 Page 1Provided by IHSNot for ResaleNo reproduction or networking per

5、mitted without license from IHS-,-,-2.4.5.1 Construction2.4.5.2 Message Strips2.4.6 Electronic Directory System2.5 METAL PLAQUES2.5.1 Cast Metal Plaques2.5.1.1 Fabrication2.5.1.2 Border2.5.1.3 Finish2.5.1.4 Mounting2.5.2 Chemically Etched Metal Plaques2.5.2.1 Fabrication2.5.2.2 Finish2.6 DIMENSIONAL

6、 BUILDING LETTERS2.6.1 Fabrication2.6.2 Size2.6.3 Finish2.6.4 Mounting2.7 PRESSURE SENSITIVE LETTERS2.7.1 Fabrication2.7.2 Size2.8 ALUMINUM ALLOY PRODUCTS2.9 ANODIC COATING2.10 ORGANIC COATING2.11 FABRICATION AND MANUFACTURE2.11.1 Factory Workmanship2.11.2 Dissimilar Materials2.12 COLOR, FINISH, AND

7、 CONTRAST2.13 TYPEFACEPART 3 EXECUTION3.1 INSTALLATION3.1.1 Anchorage3.1.2 Protection and Cleaning- End of Section Table of Contents -SECTION 10 14 00.20 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-10 14

8、 00.20 (November 2012)-Preparing Activity: USACE Superseding without RevisionUFGS-10 14 02 (February 2009)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated October 2012*SECTION 10 14 00.20INTERIOR SIGNAGE11/12*NOTE: This guide specification covers the requirements fo

9、r common types of signs, dimensional letters, and metal plaques used inside buildings.Adhere to UFC 1-300-02 Unified Facilities Guide Specifications (UFGS) Format Standard when editing this guide specification or preparing new project specification sections. Edit this guide specification for project

10、 specific requirements by adding, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Comments, suggestions and recommended changes fo

11、r this guide specification are welcome and should be submitted as a Criteria Change Request (CCR).*PART 1 GENERAL*NOTE: This section covers some of the more common interior sign types. When other sign types are to be used, such as elevator-related signs, occupancy load signs and structural load limi

12、t signs, specifications will be modified accordingly. Buildings will be accessible in accordance with 36 CFR, Part 1191, Americans with Disabilities Act (ADA) Accessibility Guidelines for Buildings and Facilities except for Army buildings excluded by TI 800-01 Design Criteria.Reference UFC 3-120-01

13、available at http:/www.wbdg.org/ccb/DOD/UFC/ufc 3 120 01.pdfhttp:/www.wbdg.org/ccb/DOD/UFC/ufc 3 120 01.pdf Unified Federal Criteria Sign Standard for SECTION 10 14 00.20 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-design, construction and

14、placement of signs. Defer to the most current version of ADA for Chapter 3 and throughout the UFC because the UFC has not been updated to include the most recent ADA revisions.In combination with this specification, drawings and attachments will include location, dimensions, elevations, schedules, c

15、ontent, details and such other information as required to indicate the extent of the work. The same terminology and designations used in the specification will be used on the drawings, schedules and attachments.Product selections shall be based on quality, aesthetic values, appearance, and cost as r

16、elated to project needs.Use of personal names on interior signage is discouraged. If personal names are required, changeable message strips will be used. Consider coordination of interior signage within this specification with signage required on individual workstations which is specified in Section

17、 12 50 00 FURNITURE SYSTEMS.Interior stairwell signage will be provided in accordance with Life Safety Code NFPA 101, Chapter 5, and applicable occupancy chapters. Clearly define interstitial spaces or other doorways within stairwell that do not lead to a horizontal exitway with signage that states

18、Not an Exit“.Permanent information on room identification signs includes the room number on all room identification signs, symbol and message on toilet rooms, message on janitor closets, mechanical/electrical and communications rooms, and message on stairs.Where appropriate for MEDICAL FACILITIES,

19、include the following requirements for signage:1. Room numbering for spaces within the medical facility will be determined jointly by the using facility and the design team. User room number will be different than architectural room number (see MIL-HDBK 1191, 4.15.3). Room numbering will be consiste

20、nt throughout the facility. For inpatient medical facilities, rooms with audiovisual nurse call shall have a unique user room number, since audiovisual nurse call is tied into a digital paging system. For outpatient clinics, rooms with tonevisual nurse call, do not need a unique user room number, si

21、nce tonevisual nurse call is hardwired to a panel located at a nursing station. Room numbering should address the following issues:a. Wayfinding within clinics and other departments (user room #).SECTION 10 14 00.20 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without l

22、icense from IHS-,-,-b. Facility Maintenance (architectural room #).c. Audiovisual Nurse Call (inpatient) (unique user room #).d. Tonevisual Nurse Call (outpatient) (user room #).2. The use of symbols/graphics on interior signage will be limited. International symbols and graphics will be used where

23、needed. Recommended symbols include men/women symbol for toilet rooms and showers, men/women symbol with key for locker rooms, telephone symbol for public telephone areas, information (?), radiation symbol, biohazard symbol, and handicap symbol.3. Arrow placement order on interior signage will compl

24、y with MIL-HDBK 1191, 4.15.2.2. Left pointing arrows at top of sign, followed by up pointing arrows, then right pointing arrows at bottom of sign. Example follows:Admissions4. Signage schedule should be provided in electronic spreadsheet format. Schedule will include architectural room number, user

25、room number, type of sign, message, symbol (if needed), color, and mounting location.5. Building directories and accompanying orientation maps for the medical facility will be determined jointly by the using facility and the design team. Orientation maps, if required, will be included as part of the

26、 interior signage package, and should be of the same manufacturer. Include international symbols for information (?), parking areas (upper case P within circle), public toilet rooms, public telephones, and graphic north arrow on orientation maps. Orientation map is to be positioned so that building

27、left is viewers left.6. Large, easy to read signs over reception counters, check-in counters, information desks, or departments will be provided. Signs should be either ceiling mounted or affixed to soffit directly above counters.7. Room identification signs should be 20.32 cm x 20.32 cm (8 x 8 inch

28、) or 22.86 cm x 22.22.86 cm (9 x 9 inch). Justification of room number and message will be flush left.8. Fire evacuation signs will be provided in accordance with the local Fire Marshal, if required.SECTION 10 14 00.20 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted withou

29、t license from IHS-,-,-9. Overhead directional signs should not block fire exit signs.10. Signage will clearly define all staff, public, or patient toilet rooms.*1.1 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications are re

30、ferred to in the text by basic designation only and listed in this paragraph by organization, designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference Article. Als

31、o use the Reference Wizards Check Reference feature to update the issue dates.References not used in the text will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish print process.*The publications listed below form a part o

32、f this specification to the extent referenced. The publications are referred to in the text by basic designation only.ALUMINUM ASSOCIATION (AA)AA DAF45 (2003; Reaffirmed 2009) Designation System for Aluminum FinishesAA PK-1 (2009) Pink Sheets: Designations and Chemical Composition Limits for Aluminu

33、m Alloys in the Form of Castings Errata 2010) Safety Glazing Materials Used in Buildings - Safety Performance Specifications and Methods of TestSECTION 10 14 00.20 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AMERICAN WELDING SOCIETY (AWS)AW

34、S D1.2/D1.2M (2008) Structural Welding Code - AluminumASTM INTERNATIONAL (ASTM)ASTM B209 (2010) Standard Specification for Aluminum and Aluminum-Alloy Sheet and PlateASTM B209M (2010) Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)ASTM B221 (2012) Standard Specificati

35、on for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and TubesASTM B221M (2012) Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)ASTM C1036 (2010e1) Standard Specification for Flat GlassASTM D635 (2010) Standard Test Met

36、hod for Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal PositionINTERNATIONAL CODE COUNCIL (ICC)ICC/ANSI A117.1 (2009) Accessible and Usable Buildings and FacilitiesNATIONAL FIRE PROTECTION ASSOCIATION (NFPA)NFPA 101 (2012; Amendment 1 2012) Life Safety

37、CodeNFPA 70 (2011; Errata 2 2012) National Electrical CodeU.S. GREEN BUILDING COUNCIL (USGBC)LEED NC (2009) Leadership in Energy and Environmental Design(tm) New Construction Rating SystemU.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)36 CFR 1191 Americans with Disabilities Act (ADA) Access

38、ibility Guidelines for Buildings and Facilities; Architectural Barriers Act (ABA) Accessibility Guidelines1.2 SUSTAINABILITY REQUIREMENTSMaterials in this technical specification may contribute towards contract compliance with sustainability requirements.SECTION 10 14 00.20 Page 7Provided by IHSNot

39、for ResaleNo reproduction or networking permitted without license from IHS-,-,-1.2.1 LEED Requirements*NOTE: The following bracketed items are representative of LEED material documentation and requirements that may apply to this project. These items should be edited to reflect the project requiremen

40、ts.*See Section 01 33 29 LEED DOCUMENTATION for project LEED NC local/regional materials, recycled content, low emitting materials, optimize energy performance, , and rapidly renewable materials requirements.1.2.2 EPA Comprehensive Procurement GuidelinesSee Section 01 62 35 RECYCLED/RECOVERED/BIOBAS

41、ED MATERIALS for requirements associated with EPA designated products.1.3 SUBMITTALS*NOTE: Review submittal description (SD) definitions in Section 01 33 00 SUBMITTAL PROCEDURES and edit the following list to reflect only the submittals required for the project.The Guide Specification technical edit

42、ors have designated those items that require Government approval, due to their complexity or criticality, with a “G.“ Generally, other submittal items can be reviewed by the Contractors Quality Control System. Only add a “G” to an item, if the submittal is sufficiently important or complex in contex

43、t of the project.For submittals requiring Government approval on Army projects, a code of up to three characters within the submittal tags may be used following the “G“ designation to indicate the approving authority. Codes for Army projects using the Resident Management System (RMS) are: “AE“ for A

44、rchitect-Engineer; “DO“ for District Office (Engineering Division or other organization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes following the “G“ typically are not used for Navy, Air Force, and NASA projects.Choose the first bracket

45、ed item for Navy, Air Force and NASA projects, or choose the second bracketed item for Army projects.*Government approval is required for submittals with a “G“ designation; submittals not having a “G“ designation are for Contractor Quality Control approval. information only. When used, a designation following the “G“ designation identifies the office that will review the submittal for the