ARMY UFGS-26 32 14 00 10-2010 DIESEL-GENERATOR SET STATIONARY 15-300 KW STANDBY APPLICATIONS《15-300千瓦备用固定柴油发电机组》.pdf

1、USACE / NAVFAC / AFCESA / NASA UFGS-26 32 14.00 10 (February 2010)-Preparing Activity: USACE SupersedingUFGS-26 32 14.00 10 (October 2007)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated April 2010*SECTION TABLE OF CONTENTSDIVISION 26 - ELECTRICALSECTION 26 32 14.0

2、0 10DIESEL-GENERATOR SET, STATIONARY 15-300 KW, STANDBY APPLICATIONS02/10PART 1 GENERAL1.1 REFERENCES1.2 SYSTEM DESCRIPTION1.2.1 Engine-Generator Parameter Schedule1.2.2 Output Capacity1.2.3 Power Rating1.2.4 Engine Generator Set Enclosure1.2.5 Vibration Isolation1.2.5.1 Vibration Limitations1.2.5.2

3、 Torsional Analysis1.2.5.3 Performance Data1.2.6 Reliability and Durability1.3 SUBMITTALS1.4 QUALITY ASSURANCE1.4.1 Conformance to Codes and Standards1.4.2 Site Welding1.4.3 Experience1.4.4 Field Engineer1.4.5 Seismic Requirements1.4.6 Detailed Drawings1.5 DELIVERY, STORAGE AND HANDLING1.6 MAINTENAN

4、CE SERVICE1.6.1 Operation Manual1.6.2 Maintenance Manual1.6.3 Extra MaterialsPART 2 PRODUCTS2.1 NAMEPLATES2.2 SAFETY DEVICES2.3 MATERIALS AND EQUIPMENT2.3.1 Circuit Breakers, Low Voltage2.3.2 Filter Elements (Fuel-oil, Lubricating-oil, and Combustion-air)2.3.3 Instrument Transformers2.3.4 Pipe (Fuel

5、/Lube-oil, Compressed-Air, Coolant and Exhaust)SECTION 26 32 14.00 10 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.3.5 Pipe Flanges and Fittings2.3.6 Pipe Hangers2.3.7 Electrical Enclosures2.3.7.1 General2.3.7.2 Panelboards2.3.8 Electric M

6、otors2.3.9 Motor Controllers2.4 ENGINE2.5 FUEL SYSTEM2.5.1 Pumps2.5.1.1 Main Pump2.5.1.2 Auxiliary Fuel Pump2.5.2 Filter2.5.3 Relief/Bypass Valve2.5.4 Integral Main Fuel Storage Tank2.5.4.1 Capacity2.5.4.2 Local Fuel Fill2.5.4.3 Fuel Level Controls2.5.4.4 Arrangement2.5.5 Day Tank2.5.5.1 Capacity, S

7、tandby2.5.5.2 Drain Line2.5.5.3 Local Fuel Fill2.5.5.4 Fuel Level Controls2.5.5.5 Arrangement2.5.6 Fuel Supply System2.6 LUBRICATION2.6.1 Filter2.6.2 Lube-Oil Sensors2.7 COOLING SYSTEM2.7.1 Coolant Pumps2.7.2 Heat Exchanger2.7.2.1 Fin-Tube-Type Heat Exchanger (Radiator)2.7.2.2 Shell and U-Tube Type

8、Heat Exchanger2.7.3 Expansion Tank2.7.4 Ductwork2.7.5 Temperature Sensors2.8 SOUND LIMITATIONS2.9 AIR INTAKE EQUIPMENT2.10 EXHAUST SYSTEM2.10.1 Flexible Sections and Expansion Joints2.10.2 Exhaust Muffler2.10.3 Exhaust Piping2.11 EMISSIONS2.12 STARTING SYSTEM2.12.1 Controls2.12.2 Capacity2.12.3 Func

9、tional Requirements2.12.4 Battery2.12.5 Battery Charger2.12.6 Starting Aids2.12.6.1 Glow Plugs2.12.6.2 Jacket-Coolant Heaters2.13 GOVERNOR2.14 GENERATOR2.14.1 Current Balance2.14.2 Voltage Balance2.14.3 Waveform2.15 EXCITERSECTION 26 32 14.00 10 Page 2Provided by IHSNot for ResaleNo reproduction or

10、networking permitted without license from IHS-,-,-2.16 VOLTAGE REGULATOR2.17 GENERATOR PROTECTION2.17.1 Panelboards2.17.2 Devices2.18 SAFETY SYSTEM2.18.1 Audible Signal2.18.2 Visual Alarm Signal2.18.3 Alarms and Action Logic2.18.3.1 Shutdown2.18.3.2 Problem2.18.4 Local Alarm Panel2.18.5 Time-Delay o

11、n Alarms2.18.6 Remote Alarm Panel2.19 ENGINE GENERATOR SET CONTROLS AND INSTRUMENTATION2.19.1 Controls2.19.2 Engine Generator Set Metering and Status Indication2.20 PANELS2.20.1 Enclosures2.20.2 Analog2.20.3 Electronic2.20.4 Parameter Display2.20.5 Exerciser2.21 SURGE PROTECTION2.22 AUTOMATIC ENGINE

12、GENERATOR-SET SYSTEM OPERATION2.22.1 Automatic Transfer Switch2.22.2 Monitoring and Transfer2.23 MANUAL ENGINE-GENERATOR SET SYSTEM OPERATION2.24 BASE2.25 THERMAL INSULATION2.26 PAINTING AND FINISHING2.27 FACTORY INSPECTION AND TESTSPART 3 EXECUTION3.1 EXAMINATION3.2 GENERAL INSTALLATION3.3 PIPING

13、INSTALLATION3.3.1 General3.3.2 Supports3.3.2.1 Ceiling and Roof3.3.2.2 Wall3.3.3 Flanged Joints3.3.4 Cleaning3.3.5 Pipe Sleeves3.4 ELECTRICAL INSTALLATION3.5 FIELD PAINTING3.6 ONSITE INSPECTION AND TESTS3.6.1 Submittal Requirementse3.6.2 Test Conditions3.6.2.1 Data3.6.2.2 Power Factor3.6.2.3 Contrac

14、tor Supplied Items3.6.2.4 Instruments3.6.2.5 Sequence3.6.3 Construction Tests3.6.3.1 Piping Test3.6.3.2 Electrical Equipment Tests3.6.4 Inspections3.6.5 Safety Run TestsSECTION 26 32 14.00 10 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3.6.

15、6 Performance Tests3.6.6.1 Continuous Engine Load Run Test3.6.6.2 Load Acceptance Test3.6.7 Automatic Operation Tests for Stand-Alone Operation3.7 ONSITE TRAINING3.8 FINAL INSPECTION AND TESTING3.9 MANUFACTURERS FIELD SERVICE3.10 INSTRUCTIONS3.11 ACCEPTANCE- End of Section Table of Contents -SECTION

16、 26 32 14.00 10 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-26 32 14.00 10 (February 2010)-Preparing Activity: USACE SupersedingUFGS-26 32 14.00 10 (October 2007)UNIFIED FACILITIES GUIDE SPECIFICATIONSRe

17、ferences are in agreement with UMRL dated April 2010*SECTION 26 32 14.00 10DIESEL-GENERATOR SET, STATIONARY 15-300 KW, STANDBY APPLICATIONS02/10*NOTE: This guide specification covers the requirements for stationary diesel driven generator sets in the 15 to 300 kilowatt capacity for standby applicati

18、ons.Edit this guide specification for project specific requirements by adding, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Com

19、ments and suggestions on this guide specification are welcome and should be directed to the technical proponent of the specification. A listing of technical proponents, including their organization designation and telephone number, is on the Internet.Recommended changes to a UFGS should be submitted

20、 as a Criteria Change Request (CCR).*PART 1 GENERAL*NOTE: This specification is for procurement of engine-generator sets which are suitable for serving general purpose and commercial-grade loads (loads which may be served by an electric utility). These are loads which can endure or recover quickly f

21、rom transient voltage and frequency changes (as much as 30 percent transient voltage drop, and plus or minus 5 percent frequency deviation, with recovery time of 2 seconds). For applications where strict control of voltage, frequency, and transient response is required, provide uninterruptible power

22、 supplies or utilize Section 26 32 15.00 10 DIESEL-GENERATOR SET STATIONARY 100-2500 KW, WITH AUXILIARIES. This SECTION 26 32 14.00 10 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-specification is for procurement of engine-generator sets for

23、 standby, stand-alone applications. For prime or parallel applications, incorporate the appropriate paragraphs from Section 26 32 15.00 10. Select the features and fill in blanks with values appropriate for the design condition. This specification does not apply to 400 Hz applications.*1.1 REFERENCE

24、S*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications are referred to in the text by basic designation only and listed in this paragraph by organization, designation, date, and title.Use the Reference Wizards Check Reference feature wh

25、en you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.References not used in the text will automatically be deleted from this section of the project sp

26、ecification when you choose to reconcile references in the publish print process.*The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)ANSI

27、C39.1 (1981; R 1992) Requirements for Electrical Analog Indicating InstrumentsASME INTERNATIONAL (ASME)ASME B16.11 (2009) Forged Fittings, Socket-Welding and ThreadedASME B16.3 (2006) Malleable Iron Threaded Fittings, Classes 150 and 300ASME B16.5 (2009) Standard for Pipe Flanges and Flanged Fitting

28、s: NPS 1/2 Through NPS 24ASME B31.1 (2007; Addenda a-2008) Power PipingASME BPVC SEC IX (2007; Addenda 2008; Addenda 2009) Boiler and Pressure Vessel Code; Section IX, Welding and Brazing QualificationsASME BPVC SEC VIII D1 (2007; Addenda 2008; Addenda 2009) Boiler SECTION 26 32 14.00 10 Page 6Provi

29、ded by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-and Pressure Vessel Code; Section VIII, Rules for Construction of Pressure Vessels Division 1ASSOCIATION OF EDISON ILLUMINATING COMPANIES (AEIC)AEIC CS8 (2000) Extruded Dielectric Shielded Power Cables Rated

30、 5 Through 46 kVASTM INTERNATIONAL (ASTM)ASTM A 106/A 106M (2008) Standard Specification for Seamless Carbon Steel Pipe for High-Temperature ServiceASTM A 135/A 135M (2009) Standard Specification for Electric-Resistance-Welded Steel PipeASTM A 181/A 181M (2006) Standard Specification for Carbon Stee

31、l Forgings, for General-Purpose PipingASTM A 234/A 234M (2007) Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature ServiceASTM A 53/A 53M (2007) Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seam

32、lessASTM B 395/B 395M (2008) Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser TubesASTM D 975 (2009b) Standard Specification for Diesel Fuel OilsELECTRICAL GENERATING SYSTEMS ASSOCIATION (EGSA)EGSA 101P (1995) Engine Driven Generator SetsINSTITUTE OF EL

33、ECTRICAL AND ELECTRONICS ENGINEERS (IEEE)IEEE 1 (2000; R 2005) General Principles for Temperature Limits in the Rating of Electric Equipment and for the Evaluation of Electrical InsulationIEEE 100 (2000; Archived) The Authoritative Dictionary of IEEE Standards TermsIEEE 120 (1989) Master Test Guide

34、for Electrical Measurements in Power CircuitsIEEE 404 (2006; R 2007) Standard for Extruded and Laminated Dielectric Shielded Cable Joints Rated 2500 V to 500,000 VIEEE 48 (2009) Standard Test Procedures and SECTION 26 32 14.00 10 Page 7Provided by IHSNot for ResaleNo reproduction or networking permi

35、tted without license from IHS-,-,-Requirements for Alternating-Current Cable Terminations Used on Shielded Cables Having Laminated InsulationIEEE 519 (1992; R 1993; Errata 2004) Recommended Practices and Requirements for Harmonic Control in Electrical Power SystemsIEEE 81 (1983) Guide for Measuring

36、Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Ground SystemIEEE C2 (2007; TIA 2007-1; TIA 2007-2; TIA 2007-3; TIA 2007-4; TIA 2007-5) National Electrical Safety CodeMANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTINGS INDUSTRY (MSS)MSS SP-58 (2009) Pipe Hangers an

37、d Supports - Materials, Design and Manufacture, Selection, Application, and InstallationMSS SP-69 (2003) Pipe Hangers and Supports - Selection and Application (ANSI Approved American National Standard)MSS SP-80 (2008) Bronze Gate, Globe, Angle and Check ValvesNATIONAL ELECTRICAL MANUFACTURERS ASSOCI

38、ATION (NEMA)NEMA ICS 2 (2000; Errata 2006; R 2005; Errata 2008) Standard for Controllers, Contactors, and Overload Relays Rated 600 VNEMA ICS 6 (1993; R 2001; R 2006) Standard for EnclosuresNEMA MG 1 (2007; Errata 2008) Standard for Motors and GeneratorsNEMA PB 1 (2006; Errata 2008) Standard for Pan

39、elboardsNEMA WC 74 (2006) Standard for 5-46 kV Shielded Power Cable for use in the Transmission and Distribution of Electric EnergyNEMA/ANSI C12.11 (2007) Instrument Transformers for Revenue Metering, 10 kV BIL through 350 kV BIL (0.6 kV NSV through 69 kV NSV)NATIONAL FIRE PROTECTION ASSOCIATION (NF

40、PA)NFPA 110 (2010; Am 10-1) Standard for Emergency and Standby Power SystemsNFPA 30 (2008; Errata 08-1) Flammable and SECTION 26 32 14.00 10 Page 8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Combustible Liquids CodeNFPA 37 (2006; Am 06-1) Standar

41、d for the Installation and Use of Stationary Combustion Engines and Gas TurbinesNFPA 70 (2008; AMD 1 2008) National Electrical CodeNFPA 99 (2005; Errata 05-1; Am 05-1, 2, 3) Standard for Health Care FacilitiesSOCIETY OF AUTOMOTIVE ENGINEERS INTERNATIONAL (SAE)SAE ARP892 (1965; R 1994) DC Starter-Gen

42、erator, EngineSAE J537 (2000) Storage BatteriesUNDERWRITERS LABORATORIES (UL)UL 1236 (2006; R 2010) Standard for Battery Chargers for Charging Engine-Starter BatteriesUL 489 (2009) Molded-Case Circuit Breakers, Molded-Case Switches and Circuit-Breaker EnclosuresUL 891 (2005; R 2003) Switchboards1.2

43、SYSTEM DESCRIPTIONa. Provide and install each engine-generator set complete and totally functional, with all necessary ancillary equipment to include air filtration; starting system; generator controls, protection, and isolation; instrumentation; lubrication; fuel system; cooling system; and engine

44、exhaust system. Each engine generator set shall satisfy the requirements specified in the Engine Generator Parameter Schedule. Submit certification that the engine-generator set and cooling system function properly in the ambient temperatures specified.b. Provide each engine-generator set consisting

45、 of one engine, one generator, and one exciter, mounted, assembled, and aligned on one base; and all other necessary ancillary equipment which may be mounted separately. Sets shall be assembled and attached to the base prior to shipping. Set components shall be environmentally suitable for the locations shown and shall be the manufacturers standard product offered in catalogs for commercial or industrial use. Provide a generator strip heater for moisture control when the generator is not operating.1.2.1 Engine-Generator Parameter Schedule*